Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Downloads] Tecno s3+

#11

(01-19-2017, 10:48 AM)hovatek Wrote:
(01-18-2017, 08:43 PM)real2josh Wrote: Thanks I did dat but still wouldn't access the recovery mode neither did the factory mode.
Meanwhile a friend sent me an s3+ rom, and I tried to flash it, buh I encountered some errors.
When I try to flash it the red bar goes to 100% and stops nothing happens for a while then I get a brom error: s_ft_download_fail (0xfa8)
I have changed port, change laptop and reinstalled d drivers, yet same story

I tried to format it buh the red bar goes to 100% and progress to format buh format does not leave 0% until an error pops up again. Brom error: s_ft_format_fail (0xfaa)
Dunno what to do again....

Upload a full screenshot of the error message




Attached Files
.jpg   1.JPG (Size: 131.15 KB / Downloads: 2)
.jpg   2.JPG (Size: 136.17 KB / Downloads: 3)
Reply
#12
(01-19-2017, 12:07 PM)real2josh Wrote: .

try using the latest version of SP flash tool @ https://forum.hovatek.com/thread-13970.html
Also, change the Download Agent setting in SP flash tool
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#13
(01-19-2017, 02:47 PM)hovatek Wrote:
(01-19-2017, 12:07 PM)real2josh Wrote: .

try using the latest version of SP flash tool @ https://forum.hovatek.com/thread-13970.html
Also, change the Download Agent setting in SP flash tool


Thanks, I've done that buh it's still same old story.....
Is there any further assistance, or should I just forget about the fone totally?
Reply
#14
(01-20-2017, 09:03 AM)real2josh Wrote: Thanks, I've done that buh it's still same old story.....
Is there any further assistance, or should I just forget about the fone totally?

Did you try all fixes @ https://forum.hovatek.com/thread-439.html
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)