Infinix Note 2 not Detecting Signal
Infinix Note 2 not Detecting Signal
(11-01-2017, 12:42 PM)wilfem I did a firmware upgrade from version 5.1 to 6.0 on an infinix X600. I made use of the SN flash tool and it was actually successful, but shockingly after all the initial setup, it kept saying invalid IMEI and couldn't detect signal. I tried using the SN Write tool, no success. I was able to get the IMEI back using the Mobile Uncle tool, but still not Detecting signals. I'm also trying to use the MTK Droid tool and PdaNet, but the Mtk Droid Tool refused to detect the phone.
Please kindly assist me with the permanent solution to the problem. Thanks
(11-01-2017, 05:28 PM)hovatek(11-01-2017, 12:42 PM)wilfem I did a firmware upgrade from version 5.1 to 6.0 on an infinix X600. I made use of the SN flash tool and it was actually successful, but shockingly after all the initial setup, it kept saying invalid IMEI and couldn't detect signal. I tried using the SN Write tool, no success. I was able to get the IMEI back using the Mobile Uncle tool, but still not Detecting signals. I'm also trying to use the MTK Droid tool and PdaNet, but the Mtk Droid Tool refused to detect the phone.
Please kindly assist me with the permanent solution to the problem. Thanks
Check under Settings > About > Baseband . What does it say?
(11-01-2017, 08:23 PM)wilfem Thanks for your response.
Here's what is written under the Baseband:
MOLY.LR9.W1444.MD.LWTG.MP.V68.P1,
2016/02/18 11:09
That's exactly what is displayed there.
(12-01-2017, 11:54 AM)hovatek(11-01-2017, 08:23 PM)wilfem Thanks for your response.
Here's what is written under the Baseband:
MOLY.LR9.W1444.MD.LWTG.MP.V68.P1,
2016/02/18 11:09
That's exactly what is displayed there.
1. Check your IMEI using *#06# , are they both the phone's original IMEI
2. Do you have the Lollipop firmware for your exact Build?
3. Can you get access to a working X600?
(12-01-2017, 03:16 PM)wilfem I just flashed it with yet another Version 6.0, this time around, the IMEI are still intact and here's the Baseband Version:
MOLY.LR9.W114.MD.LWTG.MP.V68.P2, 2016/07/20 20:40
But unfortunately still, NO MOBILE NETWORKSIGNAL yet, although it detects the 2 sim cards.
One other thing I observed is that when I switch on the Wifi, there's always an NVRAM WARNING: Err = 0x10 there as an unlocked network.
This thing is really getting frustrating more and more.
PLEASE HELP!!!
Below is a screen shot of the page from the phone
(12-01-2017, 09:49 PM)hovatek Fix the Wi-Fi error using https://www.hovatek.com/forum/thread-117.html
You should be careful flashing firmware to your X600 so it doesn't go dead. Stick to your build.
Was your phone detecting signal fine while on Lollipop?
(12-01-2017, 10:32 PM)wilfem Please, in case I later lay my hands on another working X600, what and what do I do on it, so as to make the other one work?
Please do let me know.
Thanks in advance for your assistance.