Hovatek Forum MOBILE Android [Please help] SP Flash Tool on BLADE V7 Lite B06
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] SP Flash Tool on BLADE V7 Lite B06

[Please help] SP Flash Tool on BLADE V7 Lite B06

Pages (4): Previous 1 2 3 4 Next
Codu
Codu
Codu
Junior Member
23
13-02-2017, 09:35 AM
#21



(12-02-2017, 05:41 PM)hovatek Good.
Yeah, at least the device is compatible with MB.

(12-02-2017, 05:41 PM)hovatek Now, the goal is to make your backup compatible with SP flash tool correct?
Yes, or to put it in a different form: to acheive a write process through SPFT.

(12-02-2017, 05:41 PM)hovatek Bedore we proceed, is this the firmware for your phone @ http://disk.myzte.ru/SW/BLADE_V7lite_B09.zip

Mine is B06, that one is a B09 (different target zone/language).
Both scatter files should be identical (same hardware), right ?

Do you have something in mind, like trying to flash using that B09 scatter?

Kindly,
hovatek
hovatek
hovatek
Administrator
49,570
13-02-2017, 01:22 PM
#22
(13-02-2017, 09:35 AM)Codu Mine is B06, that one is a B09 (different target zone/language).
Both scatter files should be identical (same hardware), right ?

Do you have something in mind, like trying to flash using that B09 scatter?

Kindly,

I believe both scatter files should be identical and hardware (to a large extent).
Want us to use the scatter file as a guide to modifying one that'll be fully compatible with yours.
Download the firmware but don't flash. Its just the scatter file we need for now
This post was last modified: 13-02-2017, 01:24 PM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Codu
Codu
Codu
Junior Member
23
13-02-2017, 09:22 PM
#23
(13-02-2017, 01:22 PM)hovatek I believe both scatter files should be identical and hardware (to a large extent).
Want us to use the scatter file as a guide to modifying one that'll be fully compatible with yours.
Download the firmware but don't flash. Its just the scatter file we need for now

That scatter is not a SPFT/MB scatter format because the archive is for SDCard SW update.
Anyway, I checked those addresses against mines and they almost match:

- the cache address is different:
mine 0xCB000000
SDCard's scatter 0xab000000
=> This is normal because, my system partition is 3GB while the SDCard's is 2.5GB.

- the USERDATA goes up/down with the same offset:
mine 0xE4000000
SDCard's scatter 0xc4000000

- /!\ the FLASHINFO address is not the same:
mine 0x3A2D80000
SDCard's scatter 0xFFFF0084

- /!\ the SDCard scatter references one extra partition sgpt @ 0xFFFF0004 which I don't have in my scatter.

Please check the attachments:
mine (MiracleBox original version) = MT6735_Android_scatter.txt
SDCard's B09 = SDCard_scatter.txt

What do you have in mind next?

Kindly,
Attached Files
.txt
MT6735_Android_scatter.txt
Size: 9.59 KB / Downloads: 9
.txt
SDCard_scatter.txt
Size: 446 bytes / Downloads: 3
hovatek
hovatek
hovatek
Administrator
49,570
14-02-2017, 12:30 PM
#24
(13-02-2017, 09:22 PM)Codu That scatter is not a SPFT/MB scatter format because the archive is for SDCard SW update.
Anyway, I checked those addresses against mines and they almost match:

- the cache address is different:
mine 0xCB000000
SDCard's scatter 0xab000000
=> This is normal because, my system partition is 3GB while the SDCard's is 2.5GB.

- the USERDATA goes up/down with the same offset:
mine 0xE4000000
SDCard's scatter 0xc4000000

- /!\ the FLASHINFO address is not the same:
mine 0x3A2D80000
SDCard's scatter 0xFFFF0084

- /!\ the SDCard scatter references one extra partition sgpt @ 0xFFFF0004 which I don't have in my scatter.

Please check the attachments:
mine (MiracleBox original version) = MT6735_Android_scatter.txt
SDCard's B09 = SDCard_scatter.txt

What do you have in mind next?

Kindly,

We can't really make use of that.
I just uploaded an MT6735P scatter file @ https://www.hovatek.com/forum/thread-12724.html
That will serve as the template.
Modify it using the values from the Miracle Box scatter file

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Codu
Codu
Codu
Junior Member
23
14-02-2017, 10:18 PM
#25



(14-02-2017, 12:30 PM)hovatek We can't really make use of that.
I just uploaded an MT6735P scatter file @ https://www.hovatek.com/forum/thread-12724.html
That will serve as the template.
Modify it using the values from the Miracle Box scatter file

Did it,
Same result, please check the attached image.

Kindly,
Attached Files
.jpg
Result2.jpg
Size: 129.2 KB / Downloads: 6
hovatek
hovatek
hovatek
Administrator
49,570
15-02-2017, 11:57 AM
#26
(14-02-2017, 10:18 PM)Codu Did it,
Same result, please check the attached image.

Kindly,

SP flash tool consistently detects it as MT0335
Lets check what Miracle Box detects the phone as during flashing.
Upload a screenshot of the Miracle Box flashing process, similar to this below

[Image: how-to-flash-a-firmware-in-scatter-forma...-box-5.jpg]
This post was last modified: 15-02-2017, 11:58 AM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Codu
Codu
Codu
Junior Member
23
15-02-2017, 12:31 PM
#27
(15-02-2017, 11:57 AM)hovatek SP flash tool consistently detects it as MT0335

Yep yep.

(15-02-2017, 11:57 AM)hovatek Lets check what Miracle Box detects the phone as during flashing.
Upload a screenshot of the Miracle Box flashing process, similar to this below

[Image: how-to-flash-a-firmware-in-scatter-forma...-box-5.jpg]

No need to upload an image, I already checked that in the previous test:
MiracleBox sees it as MT6735 (without the P)

Kindly,
hovatek
hovatek
hovatek
Administrator
49,570
15-02-2017, 03:03 PM
#28
(15-02-2017, 12:31 PM)Codu No need to upload an image, I already checked that in the previous test:
MiracleBox sees it as MT6735 (without the P)

Kindly,

Now, lets focus on SP flash tool.
Download a slightly lower version of 5 and also version 3.
Wan't to see what both say

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Codu
Codu
Codu
Junior Member
23
15-02-2017, 11:23 PM
#29
(15-02-2017, 03:03 PM)hovatek
(15-02-2017, 12:31 PM)Codu No need to upload an image, I already checked that in the previous test:
MiracleBox sees it as MT6735 (without the P)

Kindly,

Now, lets focus on SP flash tool.
Download a slightly lower version of 5 and also version 3.
Wan't to see what both say


The error message box (download function) from the SP Flash Tool v3.1344:

Code:

---------------------------
Smart Phone Flash Tool
---------------------------
Common Hint: For SP Flash Tool issues:

Please supply your tool version, GUI screen shot, and tool logs when you encounter trouble with the latest tool.
How to obtain the tool logs?
1. Run the tool;
2. Press Ctrl+Alt+t(Tool Title Hint: Runtime Trace Mode);
3. [Menu]Help-[SubMenu]Open logs folder.

BROM ERROR : S_BROM_CMD_STARTCMD_FAIL (2005)

[BROM] Can not pass bootrom start command via USB cable!

[HINT]:
1. Possibly target power up too early, please try again.
2. Load in the phone does not support bootloader download DA, please try to use BootRom download DA instead.
How to use BootRom download DA?
Step1. Unplug battery and USB cable in the target.
Step2. Plug in battery.
Step3. Press USB download key and do not loose it.
Step4. Plug in USB cable.
Step5. After DA is downloading, USB download key could be loosed.
Step6. If it dose not work, please retry from Step1 to Step6.

---------------------------
OK  
---------------------------

Same error (chip mismatch) for the SP_Flash_Tool_v5.1644


What if, ZTE just packed the device in a rush (the device has an adb device Id pretty pathetic: 0123456789ABCDEF) ???

What if, what we're trying to overcome, is impossible?


Kindly,
hovatek
hovatek
hovatek
Administrator
49,570
16-02-2017, 11:36 AM
#30



(15-02-2017, 11:23 PM)Codu The error message box (download function) from the SP Flash Tool v3.1344:

Code:

---------------------------
Smart Phone Flash Tool
---------------------------
Common Hint: For SP Flash Tool issues:

Please supply your tool version, GUI screen shot, and tool logs when you encounter trouble with the latest tool.
How to obtain the tool logs?
1. Run the tool;
2. Press Ctrl+Alt+t(Tool Title Hint: Runtime Trace Mode);
3. [Menu]Help-[SubMenu]Open logs folder.

BROM ERROR : S_BROM_CMD_STARTCMD_FAIL (2005)

[BROM] Can not pass bootrom start command via USB cable!

[HINT]:
1. Possibly target power up too early, please try again.
2. Load in the phone does not support bootloader download DA, please try to use BootRom download DA instead.
How to use BootRom download DA?
Step1. Unplug battery and USB cable in the target.
Step2. Plug in battery.
Step3. Press USB download key and do not loose it.
Step4. Plug in USB cable.
Step5. After DA is downloading, USB download key could be loosed.
Step6. If it dose not work, please retry from Step1 to Step6.

---------------------------
OK  
---------------------------

Same error (chip mismatch) for the SP_Flash_Tool_v5.1644


What if, ZTE just packed the device in a rush (the device has an adb device Id pretty pathetic: 0123456789ABCDEF) ???

What if, what we're trying to overcome, is impossible?


Kindly,

If that was the case then Miracle Box shouldn't have been able to identify it as MT6735(P) , read and write correctly to the phone.
I think the problem is from the scatter file or download agent we're using in SP flash tool

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Pages (4): Previous 1 2 3 4 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram