MTK 6589 error no space, SP flash tool
MTK 6589 error no space, SP flash tool
(13-02-2017, 03:53 PM)sagarsahil hello there? i tried to flash my qmobile v4 mtk 6589, as i was displaying Encryption unsuccessful at start up, i tried once and phone is off now and now getting power on again though i gave it one more try but in SP flash tool it is showing an error as no space and hint something like this, please help me out of this to reset my phone again,
guide me properly how to recover it by selecting which files on SP flash tool... plzzz soonnnnnnn.....
(13-02-2017, 07:03 PM)hovatek(13-02-2017, 03:53 PM)sagarsahil hello there? i tried to flash my qmobile v4 mtk 6589, as i was displaying Encryption unsuccessful at start up, i tried once and phone is off now and now getting power on again though i gave it one more try but in SP flash tool it is showing an error as no space and hint something like this, please help me out of this to reset my phone again,
guide me properly how to recover it by selecting which files on SP flash tool... plzzz soonnnnnnn.....
I suspect your phone has an emmc issue.
have you tried flashing another firmware for your model?
(14-02-2017, 05:07 AM)sagarsahil * which firmware i flash again, assist me in the model or how to get it, and would the device get that in dead condition??
(14-02-2017, 01:20 PM)hovatek(14-02-2017, 05:07 AM)sagarsahil * which firmware i flash again, assist me in the model or how to get it, and would the device get that in dead condition??
Was it the firmware @ https://mega.nz/#!TswCDLLZ!FPp9cqQROzmvd...b16gQVxwgY you downloaded ?
(14-02-2017, 06:21 PM)sagarsahil yes it is the same one i downloaded for my phone 850 mb file,
(15-02-2017, 10:53 AM)hovatek(14-02-2017, 06:21 PM)sagarsahil yes it is the same one i downloaded for my phone 850 mb file,
Search for another firmware for your model and try. If it persists then the emmc is faulty
(15-02-2017, 12:44 PM)sagarsahil what happens if emmc is faulty and what is the root cause of it
(15-02-2017, 02:26 PM)Codu(15-02-2017, 12:44 PM)sagarsahil what happens if emmc is faulty and what is the root cause of it
Hi there,
If the eMMC is faulty, your only option is the replacement of it (kinda hard but doable for a trained person).
An eMMC can damage itself (normal use), it can involve an extern action (repeated mechanical shocks) or, it can be damaged sooner than expected to (too long to explain...).
My tryout would be:
1. try to clean up the PCB and retry to flash it.
2. Trying to flash it while the eMMC is pressed (light force involved, like a laundry clip) against the PCB (faulty contact underneath). If it works, eMMC reflow.
3. See what's more expensive:
-eMMC replacement (pre-loaded with your phones flash)
or
- the entire phone replacement
Kindly,
(16-02-2017, 06:07 PM)sagarsahil What basically is EMMc and PCB, and how do i replace it step by step, is there any file to download or firmaware flash file or any, i hope in the whole process we dont need to work on hardware but just software.