Honor 3c H30-U10 Vibration only
Honor 3c H30-U10 Vibration only
(16-03-2017, 08:08 PM)abbas99 Hi Hovatek Team,
I am facing an issue with Honor 3c (H30-U10). It was always stuck on Huawei Logo. So I tried factory hard reset. Not Helped. Then I tried fixing it using the stock rom with Sp Flash tool. I know all steps as I have done this before for other phones. I have installed Vcom drivers properly even with Drivers Signature Disabled. When I connect the phone to Laptop. It keeps vibrating every 3 to 4 seconds. I tried it with or without battery.
With Latest Sp Flash Tool version 5.0 or Plus. It did'nt even pick up the Phone Just keeps vibrating and Shows S_Dram error.
But With Old Sp Flash Tool v3.1324 I got some success but not all.
I am trying to flash this room "ROM_H30-U10_V100R001C900B108_SIGNED" and Choosing Firmware upgrade.
I get two types of error.
1. When I check "DA DL ALL WITH CHECK SUM" I get an error at the end with Some Failed Check Sum ALL.
2. When I untick this DA DL ALL WITH CHECK SUM option. I get a different error like SC_Security_Region_Not Found
and both of these error comes at the end on 100%.
This forum has helped me in solving a problem in past. I am hopeful again. Thank you in advance.
(17-03-2017, 01:57 PM)hovatek(16-03-2017, 08:08 PM)abbas99 Hi Hovatek Team,
I am facing an issue with Honor 3c (H30-U10). It was always stuck on Huawei Logo. So I tried factory hard reset. Not Helped. Then I tried fixing it using the stock rom with Sp Flash tool. I know all steps as I have done this before for other phones. I have installed Vcom drivers properly even with Drivers Signature Disabled. When I connect the phone to Laptop. It keeps vibrating every 3 to 4 seconds. I tried it with or without battery.
With Latest Sp Flash Tool version 5.0 or Plus. It did'nt even pick up the Phone Just keeps vibrating and Shows S_Dram error.
But With Old Sp Flash Tool v3.1324 I got some success but not all.
I am trying to flash this room "ROM_H30-U10_V100R001C900B108_SIGNED" and Choosing Firmware upgrade.
I get two types of error.
1. When I check "DA DL ALL WITH CHECK SUM" I get an error at the end with Some Failed Check Sum ALL.
2. When I untick this DA DL ALL WITH CHECK SUM option. I get a different error like SC_Security_Region_Not Found
and both of these error comes at the end on 100%.
This forum has helped me in solving a problem in past. I am hopeful again. Thank you in advance.
Could you attach screenshots of the error messages.
Seems like a checksum issue
(17-03-2017, 08:12 PM)abbas99 As you can see it is almost 100% completed with error. and I got no signs of power in My Phone except Vibration. And FYI I have used two of latest SP flash tool version with zero success. They don't even pick up the Phone via COM PORT.
(18-03-2017, 10:36 AM)hovatek(17-03-2017, 08:12 PM)abbas99 As you can see it is almost 100% completed with error. and I got no signs of power in My Phone except Vibration. And FYI I have used two of latest SP flash tool version with zero success. They don't even pick up the Phone via COM PORT.
There are three possibilities here:
1. The checksum file present
2. The Download Agent set in SP flash tool
3. One of the files in the firmware
First off, cut the checksum file and paste in a different directory then try reflashing the firmware using Download only. Use the latest version of SP flash tool @ https://www.hovatek.com/forum/thread-13970.html
waiting...
(18-03-2017, 10:36 AM)hovatek(17-03-2017, 08:12 PM)abbas99 As you can see it is almost 100% completed with error. and I got no signs of power in My Phone except Vibration. And FYI I have used two of latest SP flash tool version with zero success. They don't even pick up the Phone via COM PORT.
There are three possibilities here:
1. The checksum file present
2. The Download Agent set in SP flash tool
3. One of the files in the firmware
First off, cut the checksum file and paste in a different directory then try reflashing the firmware using Download only. Use the latest version of SP flash tool @ https://www.hovatek.com/forum/thread-13970.html
waiting...
(19-03-2017, 08:22 PM)abbas99 Update - Somehow Now the latest sp flash tools works just fine But the problem still exist but very strange. For example When I try to flash the rom with latest sp flash tools it jsut dont pick up the com port. To Fix this I have to go to old version of Sp flash tool and Then I did write memory thing and flashing the Unlcoking Scatter file for honor 3c. After Doing this the next Rom flashing part Works fine on Latest sp flash tool. Everything finishes well but still phone not turning on. Not even logo. Not botting to Recovery even.
I have tried about 5 Different roms for Honor 3c H30-U10. Downloaded from Offical Websites. and Matched Md5 Correctly. I tried China Rom EU ROM. My Country rom from official Website. The strange thing is that rom flashing is done successfully With GReen Tick Sign. I even tried Extracting Update.app file using Huawei Update Extractor tool. Rom Flashing get successufully but no sign of Power. Just vibration after few seconds.
NOTE - I have put the phone on CHarging for couple of hours in case the battery is down. But still no help. Sometimes after flashing a rom successfully I noted that the vibration is gone even with pressing three button at a same time. But it comes again sometimes. one more thing I noticed is that When i plug in the charging it shows Charging Light on but after a few minutes it is off and then after few minutes again on. Not sure why this is happening. Please reply if you have any idea about this situation. Thank you