Hovatek Forum HARDWARE SIM / Network unlock Help for E3533s-2
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Help for E3533s-2

Help for E3533s-2

hm911
hm911
hm911
Newbie
3
22-03-2017, 08:11 PM
#1



Hi Smile


 I'm trying to unlock my huawei Hilink usb modem E3533s-2 under MOBILIS mobile operator using a wrong firmware :


Huawei_E3533_Firmware_22.318.05.00.00_Universal

during the updating it show me the Error: 21 Failed to restore user information

after that message, my usb modem can't be detected Sad

are there some ticks to do in hardware to factory reset or reset it ??

any suggestions are appreciated, Wink

.jpg
DSC_0128.JPG
Size: 140.59 KB / Downloads: 40
  
.jpg
DSC_0129.JPG
Size: 161.31 KB / Downloads: 40
droidmobitech
droidmobitech
droidmobitech
Senior Member
828
23-03-2017, 10:48 AM
#2
(22-03-2017, 08:11 PM)hm911 Hi Smile


 I'm trying to unlock my huawei Hilink usb modem E3533s-2 under MOBILIS mobile operator using a wrong firmware :


Huawei_E3533_Firmware_22.318.05.00.00_Universal

during the updating it show me the Error: 21 Failed to restore user information

after that message, my usb modem can't be detected Sad

are there some ticks to do in hardware to factory reset or reset it ??

any suggestions are appreciated, Wink

  
READ THIS

It can be detected with dead boot method using the boot pin procedure

There exist on the pcb , golden round points

Find any flexible metallic pin,

Place one end of the pin to any golden point, and place the other end to the metal casing found on the modem,

Thereafter , hold the attachment and connect usb cable,

You can use a usb hub to make it easier...

Try all other golden points connected to the metal casing via the pin, one will cause pc to detect this driver

Huawei Diagnostic Com Port....

That point is the boot point

Using balong Downloader to flash your modem usbloader...

Thereafter flash modem firmware and update webUI

To complete repair process


Like in this picture try all the points one after the other with GND (any metal casing on the modem board serves as gnd)

Then connect usb , one will surely cause the modem to be detected by pc

[Image: 18e68283a9f5e9ffd2ecb29065fe2ad0.jpg]

[Image: 8f26dbc60a4ac6fdc690016234bd4b16.jpg]

[Image: d674c7a3e71438ca9c734184228a2eb9.jpg]
droidmobitech
droidmobitech
droidmobitech
Senior Member
828
23-03-2017, 10:53 AM
#3
Use this guide as reference , find your modems boot point, Usbloader file, mostly found in the modem firmware file, .bin format

Use Balong to flash the loader and then proceed as described

Link
https://www.hovatek.com/forum/showthread.php?tid=16008
hm911
hm911
hm911
Newbie
3
26-03-2017, 02:48 AM
#4
(23-03-2017, 10:53 AM)droidmobitech Use this guide as reference , find your modems boot point, Usbloader file, mostly found in the modem firmware file, .bin format

Use Balong to flash the loader and then proceed as described

Link
https://www.hovatek.com/forum/showthread.php?tid=16008

thank you for your help Smile

I found Boot point of my usb modem as shown in this picture :
.jpg
DSC_0128.JPG
Size: 147.46 KB / Downloads: 63



my problem is that I don't find the exact firmeware as well as the usbloader

here is the firmwares which I find and download :

E3533s_WEBUI-15.100.03.00.03_Universal.zip
Huawei_E3533_Firmware_22.318.05.00.00_Universal.rar
Huawei_E3533s_Firmware_22.318.29.00.403.rar

I extract these files and I found only firmware without usbloader

I downloaded droid-extract-from-Balong file, it don't contain E3533
droidmobitech
droidmobitech
droidmobitech
Senior Member
828
28-03-2017, 02:40 PM
#5



(26-03-2017, 02:48 AM)hm911
(23-03-2017, 10:53 AM)droidmobitech Use this guide as reference , find your modems boot point, Usbloader file, mostly found in the modem firmware file, .bin format

Use Balong to flash the loader and then proceed as described

Link
https://www.hovatek.com/forum/showthread.php?tid=16008

thank you for your help Smile

I found Boot point of my usb modem as shown in this picture :


my problem is that I don't find the exact firmeware as well as the usbloader

here is the firmwares which I find and download :

E3533s_WEBUI-15.100.03.00.03_Universal.zip
Huawei_E3533_Firmware_22.318.05.00.00_Universal.rar
Huawei_E3533s_Firmware_22.318.29.00.403.rar

I extract these files and I found only firmware without usbloader

I downloaded droid-extract-from-Balong file, it don't contain E3533
We will try and get your required files
cranknet
cranknet
cranknet
Newbie
1
09-12-2017, 12:21 PM
#6
How did u extracted the firmware?
I have a firmware, I know it contains usb_loader.
hm911
hm911
hm911
Newbie
3
24-03-2018, 09:27 PM
#7
(09-12-2017, 12:21 PM)cranknet How did u extracted the firmware?
I have a firmware, I know it contains usb_loader.

I used : Huawei Modem Flasher v1.6©fr3nsis

.jpg
Capture.JPG
Size: 50.79 KB / Downloads: 35


I used : Balong_USB_Downloader_1.0.1.10 to upload each of these 18 files , but it can't reconized them as usb_laoder


have you other suggestions ? Smile
freshtyt
freshtyt
freshtyt
Senior Member
2,949
26-03-2018, 05:12 PM
#8
(24-03-2018, 09:27 PM)hm911 I used : Huawei Modem Flasher v1.6©fr3nsis
I used : Balong_USB_Downloader_1.0.1.10 to upload each of these 18 files , but it can't reconized them as usb_laoder
have you other suggestions ? Smile

i think this modem using v3 algo code, why are you guys even trying to update the firmware?
those files are not usbloader / usbsafe bin files. balong won't work
usbloader for this model isn't available, you may want to consider trying to flash firmware from dcunlocker instead
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram