huawei p9 pro clon bricked
huawei p9 pro clon bricked
(24-03-2017, 03:51 PM)leo_hacker82 i just buy thus phone its a huawei p9 pro clon with real fingerprint
it has virus and very laggy the i proceed to flash a rom find in youtube, has the same compilation name and everything match with my phone
after flash phone do not power or charge or do something at all,
i found som roms for unbrick device..but when i try to flash just get red bar to 100% and do not start flash...try to format and nothing..write memory nothing..
i disconnect battery and same issue..always get red bar and dont start falshing.
i just try flash preloader..nothing happend.
format whole flash same issue
any advice please for at least can format phone and flash rom please
(24-03-2017, 04:54 PM)innageeenable dram failed 4032 or sometimesenable dram failed 0xfc0(24-03-2017, 03:51 PM)leo_hacker82 i just buy thus phone its a huawei p9 pro clon with real fingerprint
it has virus and very laggy the i proceed to flash a rom find in youtube, has the same compilation name and everything match with my phone
after flash phone do not power or charge or do something at all,
i found som roms for unbrick device..but when i try to flash just get red bar to 100% and do not start flash...try to format and nothing..write memory nothing..
i disconnect battery and same issue..always get red bar and dont start falshing.
i just try flash preloader..nothing happend.
format whole flash same issue
any advice please for at least can format phone and flash rom please
What error message did you get?
(24-03-2017, 05:34 PM)leo_hacker82Dram read error 4032 means the emmc chip is damaged(24-03-2017, 04:54 PM)innageeenable dram failed 4032 or sometimesenable dram failed 0xfc0(24-03-2017, 03:51 PM)leo_hacker82 i just buy thus phone its a huawei p9 pro clon with real fingerprint
it has virus and very laggy the i proceed to flash a rom find in youtube, has the same compilation name and everything match with my phone
after flash phone do not power or charge or do something at all,
i found som roms for unbrick device..but when i try to flash just get red bar to 100% and do not start flash...try to format and nothing..write memory nothing..
i disconnect battery and same issue..always get red bar and dont start falshing.
i just try flash preloader..nothing happend.
format whole flash same issue
any advice please for at least can format phone and flash rom please
What error message did you get?
(24-03-2017, 05:34 PM)leo_hacker82 enable dram failed 4032 or sometimesenable dram failed 0xfc0
(24-03-2017, 08:25 PM)hovatek(24-03-2017, 05:34 PM)leo_hacker82 enable dram failed 4032 or sometimesenable dram failed 0xfc0
Error 4032 could also mean a mismatch error (incompatible firmware or wrong flash settings) , refer to https://www.hovatek.com/forum/thread-439.html
Are you still able to successfully flash the first firmware to your phone?
(24-03-2017, 08:57 PM)leo_hacker82 Not even with the firmware who brick devices...i just get stuck red bar at 100% , always say mismatch...but why first time accept firmware without issue...i have 3 Roms but i think first need to format whole device to make a clean flash...
(25-03-2017, 11:24 AM)hovatekim gonna try some roms wqith same compilation like a9 pro or something like that(24-03-2017, 08:57 PM)leo_hacker82 Not even with the firmware who brick devices...i just get stuck red bar at 100% , always say mismatch...but why first time accept firmware without issue...i have 3 Roms but i think first need to format whole device to make a clean flash...
This isn't necessarily about formatting but the firmware in use. Like in the case of the Gionee P2S @ https://www.hovatek.com/forum/thread-12237.html , the firmware of a different build resolved the issue. That might be the case here also
(25-03-2017, 04:23 PM)leo_hacker82 im gonna try some roms wqith same compilation like a9 pro or something like that
(25-03-2017, 11:16 PM)hovatekok, i try it, 3 different rom but all those 3 roms has same preloader..maybe need to find another rom with different preloader(25-03-2017, 04:23 PM)leo_hacker82 im gonna try some roms wqith same compilation like a9 pro or something like that
I'm not asking you to do that. What i'm asking is that you search for other firmware for your model. If you're lucky enough to identify which phone model (different brand) is a clone of yours then you could give that a shot