Hovatek Forum MOBILE Android huawei p9 pro clon bricked
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


huawei p9 pro clon bricked

huawei p9 pro clon bricked

Pages (3): 1 2 3 Next
leo_hacker82
leo_hacker82
leo_hacker82
Techie Member
57
24-03-2017, 03:51 PM
#1



i just buy thus phone its a huawei p9 pro clon with real fingerprint
it has virus and very laggy the i proceed to flash a rom find in youtube, has the same compilation name and everything match with my phone
after flash phone do not power or charge or do something at all,
i found som roms for unbrick device..but when i try to flash just get red bar to 100% and do not start flash...try to format and nothing..write memory nothing..
i disconnect battery and same issue..always get red bar and dont start falshing.
i just try flash preloader..nothing happend.
format whole flash same issue
any advice please for at least can format phone and flash rom please
xerxes
xerxes
xerxes
Senior Member
8,355
24-03-2017, 04:54 PM
#2
(24-03-2017, 03:51 PM)leo_hacker82 i just buy thus phone its a huawei p9 pro clon with real fingerprint
it has virus and very laggy the i proceed to flash a rom find in youtube, has the same compilation name and everything match with my phone
after flash phone do not power or charge or do something at all,
i found som roms for unbrick device..but when i try to flash just get red bar to 100% and do not start flash...try to format and nothing..write memory nothing..
i disconnect battery and same issue..always get red bar and dont start falshing.
i just try flash preloader..nothing happend.
format whole flash same issue
any advice please for at least can format phone and flash rom please

What error message did you get?
leo_hacker82
leo_hacker82
leo_hacker82
Techie Member
57
24-03-2017, 05:34 PM
#3
(24-03-2017, 04:54 PM)innagee
(24-03-2017, 03:51 PM)leo_hacker82 i just buy thus phone its a huawei p9 pro clon with real fingerprint
it has virus and very laggy the i proceed to flash a rom find in youtube, has the same compilation name and everything match with my phone
after flash phone do not power or charge or do something at all,
i found som roms for unbrick device..but when i try to flash just get red bar to 100% and do not start flash...try to format and nothing..write memory nothing..
i disconnect battery and same issue..always get red bar and dont start falshing.
i just try flash preloader..nothing happend.
format whole flash same issue
any advice please for at least can format phone and flash rom please

What error message did you get?
enable dram failed 4032 or sometimesenable dram failed 0xfc0
droidmobitech
droidmobitech
droidmobitech
Senior Member
828
24-03-2017, 07:54 PM
#4
(24-03-2017, 05:34 PM)leo_hacker82
(24-03-2017, 04:54 PM)innagee
(24-03-2017, 03:51 PM)leo_hacker82 i just buy thus phone its a huawei p9 pro clon with real fingerprint
it has virus and very laggy the i proceed to flash a rom find in youtube, has the same compilation name and everything match with my phone
after flash phone do not power or charge or do something at all,
i found som roms for unbrick device..but when i try to flash just get red bar to 100% and do not start flash...try to format and nothing..write memory nothing..
i disconnect battery and same issue..always get red bar and dont start falshing.
i just try flash preloader..nothing happend.
format whole flash same issue
any advice please for at least can format phone and flash rom please

What error message did you get?
enable dram failed 4032 or sometimesenable dram failed 0xfc0
Dram read error 4032 means the emmc chip is damaged


Your only solution is reballing and try flashing

Or complete emmc replacement

This will require a technical support , taking the device to repair Centre is necessary
hovatek
hovatek
hovatek
Administrator
49,570
24-03-2017, 08:25 PM
#5



(24-03-2017, 05:34 PM)leo_hacker82 enable dram failed 4032 or sometimesenable dram failed 0xfc0

Error 4032 could also mean a mismatch error (incompatible firmware or wrong flash settings) , refer to https://www.hovatek.com/forum/thread-439.html
Are you still able to successfully flash the first firmware to your phone?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
leo_hacker82
leo_hacker82
leo_hacker82
Techie Member
57
24-03-2017, 08:57 PM
#6
(24-03-2017, 08:25 PM)hovatek
(24-03-2017, 05:34 PM)leo_hacker82 enable dram failed 4032 or sometimesenable dram failed  0xfc0

Error 4032 could also mean a mismatch error (incompatible firmware or wrong flash settings) , refer to https://www.hovatek.com/forum/thread-439.html
Are you still able to successfully flash the first firmware to your phone?

Not even  with the firmware who brick devices...i just get  stuck red bar at 100% , always say mismatch...but why first time accept firmware without issue...i have  3 Roms but  i think first need to format  whole device  to make a clean flash...
hovatek
hovatek
hovatek
Administrator
49,570
25-03-2017, 11:24 AM
#7
(24-03-2017, 08:57 PM)leo_hacker82 Not even  with the firmware who brick devices...i just get  stuck red bar at 100% , always say mismatch...but why first time accept firmware without issue...i have  3 Roms but  i think first need to format  whole device  to make a clean flash...

This isn't necessarily about formatting but the firmware in use. Like in the case of the Gionee P2S @ https://www.hovatek.com/forum/thread-12237.html , the firmware of a different build resolved the issue. That might be the case here also

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
leo_hacker82
leo_hacker82
leo_hacker82
Techie Member
57
25-03-2017, 04:23 PM
#8
(25-03-2017, 11:24 AM)hovatek
(24-03-2017, 08:57 PM)leo_hacker82 Not even  with the firmware who brick devices...i just get  stuck red bar at 100% , always say mismatch...but why first time accept firmware without issue...i have  3 Roms but  i think first need to format  whole device  to make a clean flash...

This isn't necessarily about formatting but the firmware in use. Like in the case of the Gionee P2S @ https://www.hovatek.com/forum/thread-12237.html , the firmware of a different build resolved the issue. That might be the case here also
im gonna try some roms wqith same compilation like a9 pro or something like that
hovatek
hovatek
hovatek
Administrator
49,570
25-03-2017, 11:16 PM
#9
(25-03-2017, 04:23 PM)leo_hacker82 im gonna try some roms wqith same compilation like a9 pro or something like that

I'm not asking you to do that. What i'm asking is that you search for other firmware for your model. If you're lucky enough to identify which phone model (different brand) is a clone of yours then you could give that a shot

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
leo_hacker82
leo_hacker82
leo_hacker82
Techie Member
57
28-03-2017, 12:02 AM
#10



(25-03-2017, 11:16 PM)hovatek
(25-03-2017, 04:23 PM)leo_hacker82 im gonna try some roms wqith same compilation like a9 pro or something like that

I'm not asking you to do that. What i'm asking is that you search for other firmware for your model. If you're lucky enough to identify which phone model (different brand) is a clone of yours then you could give that a shot
ok, i try it, 3 different rom but all those 3 roms has same preloader..maybe need to find another rom with different preloader
Pages (3): 1 2 3 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram