Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Bricked Samsung Galaxy S7 Clone (Hero2qltecz) MT6580

#1

Hi, I was trying to ROOT a Galaxy S7 Clone, I tried to root it with PS flash tool, but the flash didn't work, when I flashed it, I was not able to access recovery mode, so I tried to flash it through ADB Fastboot, and that bricked the phone completely, I've been looking to download a working firmware for that phone but all of them are password protected and no one seems to know it, I would like to know if there's any way I can unbrick the phone. Thanks for your help!


Reply
#2
(04-23-2017, 03:45 AM)rcmalonso Wrote: Hi, I was trying to ROOT a Galaxy S7 Clone, I tried to root it with PS flash tool, but the flash didn't work, when I flashed it, I was not able to access recovery mode, so I tried to flash it through ADB Fastboot, and that bricked the phone completely, I've been looking to download a working firmware for that phone but all of them are password protected and no one seems to know it, I would like to know if there's any way I can unbrick the phone. Thanks for your help!

Update:
I was able to get the firmware, now the thing is when I try to flash it with SP flash tool it shows an error "BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (0x13BE)

[EMI] Obtain DRAM Failed!
[HINT]:
Please check your load matches to your target which is to be downloaded.


Any solutions for this issue???
Reply
#3
(This post was last modified: 04-23-2017, 11:05 AM by innagee. )
(04-23-2017, 07:12 AM)rcmalonso Wrote:
(04-23-2017, 03:45 AM)rcmalonso Wrote: Hi, I was trying to ROOT a Galaxy S7 Clone, I tried to root it with PS flash tool, but the flash didn't work, when I flashed it, I was not able to access recovery mode, so I tried to flash it through ADB Fastboot, and that bricked the phone completely, I've been looking to download a working firmware for that phone but all of them are password protected and no one seems to know it, I would like to know if there's any way I can unbrick the phone. Thanks for your help!

Update:
I was able to get the firmware, now the thing is when I try to flash it with SP flash tool it shows an error "BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (0x13BE)

[EMI] Obtain DRAM Failed!
[HINT]:
Please check your load matches to your target which is to be downloaded.


Any solutions for this issue???

That's mismatch error, look for compatible ROM. What type is your phone chipset?

Sent from my Z10 using Hovatek mobile
Reply
#4
(04-23-2017, 11:04 AM)innagee Wrote:
(04-23-2017, 07:12 AM)rcmalonso Wrote:
(04-23-2017, 03:45 AM)rcmalonso Wrote: Hi, I was trying to ROOT a Galaxy S7 Clone, I tried to root it with PS flash tool, but the flash didn't work, when I flashed it, I was not able to access recovery mode, so I tried to flash it through ADB Fastboot, and that bricked the phone completely, I've been looking to download a working firmware for that phone but all of them are password protected and no one seems to know it, I would like to know if there's any way I can unbrick the phone. Thanks for your help!

Update:
I was able to get the firmware, now the thing is when I try to flash it with SP flash tool it shows an error "BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (0x13BE)

[EMI] Obtain DRAM Failed!
[HINT]:
Please check your load matches to your target which is to be downloaded.


Any solutions for this issue???

That's mismatch error, look for compatible ROM. What type is your phone chipset?

Sent from my Z10 using Hovatek mobile

These are the phone specs:
Brand     : samsung
ProdName  : hero2qltezc
ProdModel : SM-G9350
Device    : hero2qltechn
AndroidVer: 6.0.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55

[Read Ok] : preloader_hct6580_weg_a_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / hct6580_weg_a_l / EMMC

MT6580__samsung__SM-G9350__hero2qltechn__6.0.1__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55


The thing is when I try to flash the file in SP flash tool, the red bar goes all up, but then it won't pass to the purple bar, but thtat's because is bricked, most of the solutions I have seen is to take the battery out, but the battery of this phone is no detachable, If you know of any ROM or any method to unbrick the phone I will be very grateful!

Thanks
Reply
#5
(04-23-2017, 06:28 PM)rcmalonso Wrote:
(04-23-2017, 11:04 AM)innagee Wrote:
(04-23-2017, 07:12 AM)rcmalonso Wrote:
(04-23-2017, 03:45 AM)rcmalonso Wrote: Hi, I was trying to ROOT a Galaxy S7 Clone, I tried to root it with PS flash tool, but the flash didn't work, when I flashed it, I was not able to access recovery mode, so I tried to flash it through ADB Fastboot, and that bricked the phone completely, I've been looking to download a working firmware for that phone but all of them are password protected and no one seems to know it, I would like to know if there's any way I can unbrick the phone. Thanks for your help!

Update:
I was able to get the firmware, now the thing is when I try to flash it with SP flash tool it shows an error "BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (0x13BE)

[EMI] Obtain DRAM Failed!
[HINT]:
Please check your load matches to your target which is to be downloaded.


Any solutions for this issue???

That's mismatch error, look for compatible ROM. What type is your phone chipset?

Sent from my Z10 using Hovatek mobile

These are the phone specs:
Brand     : samsung
ProdName  : hero2qltezc
ProdModel : SM-G9350
Device    : hero2qltechn
AndroidVer: 6.0.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55

[Read Ok] : preloader_hct6580_weg_a_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / hct6580_weg_a_l / EMMC

MT6580__samsung__SM-G9350__hero2qltechn__6.0.1__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55


The thing is when I try to flash the file in SP flash tool, the red bar goes all up, but then it won't pass to the purple bar, but thtat's because is bricked, most of the solutions I have seen is to take the battery out, but the battery of this phone is no detachable, If you know of any ROM or any method to unbrick the phone I will be very grateful!

Thanks

Attach screenshot of the folder containing the flash files

Sent from my Z10 using Hovatek mobile

Reply
#6
(04-23-2017, 06:56 PM)innagee Wrote:
(04-23-2017, 06:28 PM)rcmalonso Wrote:
(04-23-2017, 11:04 AM)innagee Wrote:
(04-23-2017, 07:12 AM)rcmalonso Wrote:
(04-23-2017, 03:45 AM)rcmalonso Wrote: Hi, I was trying to ROOT a Galaxy S7 Clone, I tried to root it with PS flash tool, but the flash didn't work, when I flashed it, I was not able to access recovery mode, so I tried to flash it through ADB Fastboot, and that bricked the phone completely, I've been looking to download a working firmware for that phone but all of them are password protected and no one seems to know it, I would like to know if there's any way I can unbrick the phone. Thanks for your help!

Update:
I was able to get the firmware, now the thing is when I try to flash it with SP flash tool it shows an error "BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (0x13BE)

[EMI] Obtain DRAM Failed!
[HINT]:
Please check your load matches to your target which is to be downloaded.


Any solutions for this issue???

That's mismatch error, look for compatible ROM. What type is your phone chipset?

Sent from my Z10 using Hovatek mobile

These are the phone specs:
Brand     : samsung
ProdName  : hero2qltezc
ProdModel : SM-G9350
Device    : hero2qltechn
AndroidVer: 6.0.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55

[Read Ok] : preloader_hct6580_weg_a_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / hct6580_weg_a_l / EMMC

MT6580__samsung__SM-G9350__hero2qltechn__6.0.1__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55


The thing is when I try to flash the file in SP flash tool, the red bar goes all up, but then it won't pass to the purple bar, but thtat's because is bricked, most of the solutions I have seen is to take the battery out, but the battery of this phone is no detachable, If you know of any ROM or any method to unbrick the phone I will be very grateful!

Thanks

Attach screenshot of the folder containing the flash files

Sent from my Z10 using Hovatek mobile
https://ibb.co/kPCawQ there's the link with the image

Also, I'm trying and now I'm getting this error https://ibb.co/dYhm35
Reply
#7
(04-23-2017, 07:57 PM)rcmalonso Wrote:
(04-23-2017, 06:56 PM)innagee Wrote:
(04-23-2017, 06:28 PM)rcmalonso Wrote:
(04-23-2017, 11:04 AM)innagee Wrote:
(04-23-2017, 07:12 AM)rcmalonso Wrote: Update:
I was able to get the firmware, now the thing is when I try to flash it with SP flash tool it shows an error "BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (0x13BE)

[EMI] Obtain DRAM Failed!
[HINT]:
Please check your load matches to your target which is to be downloaded.


Any solutions for this issue???

That's mismatch error, look for compatible ROM. What type is your phone chipset?

Sent from my Z10 using Hovatek mobile

These are the phone specs:
Brand     : samsung
ProdName  : hero2qltezc
ProdModel : SM-G9350
Device    : hero2qltechn
AndroidVer: 6.0.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55

[Read Ok] : preloader_hct6580_weg_a_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / hct6580_weg_a_l / EMMC

MT6580__samsung__SM-G9350__hero2qltechn__6.0.1__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55


The thing is when I try to flash the file in SP flash tool, the red bar goes all up, but then it won't pass to the purple bar, but thtat's because is bricked, most of the solutions I have seen is to take the battery out, but the battery of this phone is no detachable, If you know of any ROM or any method to unbrick the phone I will be very grateful!

Thanks

Attach screenshot of the folder containing the flash files

Sent from my Z10 using Hovatek mobile
https://ibb.co/kPCawQ there's the link with the image

Also, I'm trying and now I'm getting this error https://ibb.co/dYhm35

keep  holding  down the volume decrease button just before connecting the phone to PC for flashing (you could try volume increase , power + volume decrease or power + volume increase).

Sent from my Z10 using Hovatek mobile
Reply
#8
(04-23-2017, 08:45 PM)innagee Wrote:
(04-23-2017, 07:57 PM)rcmalonso Wrote:
(04-23-2017, 06:56 PM)innagee Wrote:
(04-23-2017, 06:28 PM)rcmalonso Wrote:
(04-23-2017, 11:04 AM)innagee Wrote: That's mismatch error, look for compatible ROM. What type is your phone chipset?

Sent from my Z10 using Hovatek mobile

These are the phone specs:
Brand     : samsung
ProdName  : hero2qltezc
ProdModel : SM-G9350
Device    : hero2qltechn
AndroidVer: 6.0.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55

[Read Ok] : preloader_hct6580_weg_a_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / hct6580_weg_a_l / EMMC

MT6580__samsung__SM-G9350__hero2qltechn__6.0.1__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55


The thing is when I try to flash the file in SP flash tool, the red bar goes all up, but then it won't pass to the purple bar, but thtat's because is bricked, most of the solutions I have seen is to take the battery out, but the battery of this phone is no detachable, If you know of any ROM or any method to unbrick the phone I will be very grateful!

Thanks

Attach screenshot of the folder containing the flash files

Sent from my Z10 using Hovatek mobile
https://ibb.co/kPCawQ there's the link with the image

Also, I'm trying and now I'm getting this error https://ibb.co/dYhm35

keep  holding  down the volume decrease button just before connecting the phone to PC for flashing (you could try volume increase , power + volume decrease or power + volume increase).

Sent from my Z10 using Hovatek mobile
I tried, but there was no success...
Reply
#9
I have noticed that the phone connects and disconnets itself, probably that's why is not flashing the files correctly, do you think if I let drain the phone battery for a few days S¨P Flash tools would proceed like the phone is turned off?
Reply
#10
(04-24-2017, 03:01 AM)rcmalonso Wrote: I have noticed that the phone connects and disconnets itself, probably that's why is not flashing the files correctly, do you think if I let drain the phone battery for a few days S¨P Flash tools would proceed like the phone is turned off?

I don't think you need to drain the battery, rather charged battery.

Sent from my Z10 using Hovatek mobile
Reply










Users browsing this thread:
1 Guest(s)