Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Gionee P2s Issues

#11

(05-15-2017, 10:13 AM)hovatek Wrote:
(05-14-2017, 01:23 PM)azeezall_0 Wrote: Yeah directly to recovery mode..... Exactly the same way it behave when I flashed with P2S stock rom

Try formatting without flashing back the firmware. See if the phone stays dead

Still didn't boot to home screen..... Ended booting to recovery as usual


Reply
#12
(05-14-2017, 11:25 PM)innagee Wrote:
(05-14-2017, 01:23 PM)azeezall_0 Wrote:
(05-12-2017, 02:04 PM)freshtyt Wrote:
(05-12-2017, 12:22 PM)azeezall_0 Wrote: Yes sir

Are you saying that after flashing the Walton ROM, your phone still boots directly to recovery mode?

Sent from my itel it1408 using the Hovatek Forum App


Yeah directly to recovery mode..... Exactly the same way it behave when I flashed with P2S stock rom

Have you tried dumping from a working Gionee p2s firmware and writing on your's using miracle method?

Sent from my Z10 using Hovatek mobile


Haven't tried that cos I cudnt see any working Gionee phone to dump d rom
Reply
#13
(05-16-2017, 12:53 PM)azeezall_0 Wrote:
(05-14-2017, 11:25 PM)innagee Wrote:
(05-14-2017, 01:23 PM)azeezall_0 Wrote:
(05-12-2017, 02:04 PM)freshtyt Wrote:
(05-12-2017, 12:22 PM)azeezall_0 Wrote: Yes sir

Are you saying that after flashing the Walton ROM, your phone still boots directly to recovery mode?

Sent from my itel it1408 using the Hovatek Forum App


Yeah directly to recovery mode..... Exactly the same way it behave when I flashed with P2S stock rom

Have you tried dumping from a working Gionee p2s firmware and writing on your's using miracle method?

Sent from my Z10 using Hovatek mobile


Haven't tried that cos I cudnt see any working Gionee phone to dump d rom

Look for one around and try that.
Reply
#14
(This post was last modified: 05-17-2017, 12:37 AM by azeezall_0. )
(05-17-2017, 12:16 AM)azeezall_0 Wrote: I tried formatting the fone then firmware upgrading with Walton rom, It takes an hour plus to upgrade, after getting to 100 it shows dz error

Brom Error .::  (1)    

thats the error it shows
Reply
#15
(05-16-2017, 12:46 PM)azeezall_0 Wrote: Still didn't boot to home screen..... Ended booting to recovery as usual

This was a very important test so I need to be certain you understood the gravity and did it right.
I'll take it again
Format the phone (using format only) in SP Flash tool . After formatting, try booting up the phone (without flashing back any firmware to it).
I want to know if the phone stays dead (no sign of life) or can boot up (even if straight to recovery)

Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#16
(05-17-2017, 09:32 AM)hovatek Wrote:
(05-16-2017, 12:46 PM)azeezall_0 Wrote: Still didn't boot to home screen..... Ended booting to recovery as usual

This was a very important test so I need to be certain you understood the gravity and did it right.
I'll take it again
Format the phone (using format only) in SP Flash tool . After formatting, try booting up the phone (without flashing back any firmware to it).
I want to know if the phone stays dead (no sign of life) or can boot up (even if straight to recovery)


Yeah, still reformatted now..... After formatting it boots straight to recovery when powered
Reply
#17
(05-17-2017, 12:53 PM)azeezall_0 Wrote: Yeah, still reformatted now..... After formatting it boots straight to recovery when powered

if thats the case, then the emmc chip on the device is damaged
you'll need to replace it
Reply










Users browsing this thread:
1 Guest(s)