Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Custom Recovery & Root Lava Iris 702 MT6580.. ( SOLVED)

#1

Hi, I need some help here.. I want to root my phone, I've spend a days tried so many methods for rooting my phone.. But all I got is nothing.. I think flashing SuperSu.zip via custom recovery is the only one way.. Here is the problem :

1. I can't connect my phone to my PC when I want to flash or read using Miracle Box even so many times I install & uninstall the driver, adb, etc. When I use the Miracle box + loader, it's only work on Adb Android mode like reboot to recovery or read info, but not work when I try to backup scatter, it say "no usbport".. What should I do..?

2. I've downloaded the stock firmware to get the lava iris 702 scatter file & stock recovery from india website that read with Infinity China Miracle 2, the file contain .bin format.. The question is, can you port some custom recovery for me with this file, please..? But stock firmware I've downloaded has a different build number with mine because I download it from india website & my lava iris 702 built in Indonesia.. Is that ok..?

3. The SP Flashtool show me error "S_DL_LOAD_REGION_IS_OVERLAP please check partition size" when I try to scatter load with this scatter file I've downloaded before.. What should I do..?

4. I still confuse with connecting my phone to the PC.. Can you please help me how to install the driver correctly..? Because when I install the driver VCOM preloader, the port always show me yellow triangle and my phone not respond when I try to flash & read using Miracle box or SP Flashtool..

I hope you guys can solve my problem so people who has a lava iris 702 helped too when they want to root their phone..

Thanks a lot..
*here are the files :
Recovery.bin
https://www.mediafire.com/file/vaaav6yc4...covery.bin

Scatter file
https://www.mediafire.com/file/cn2vo4t3m...catter.txt

[Image: 431d6c251bfeb30301738c9895886b2c.jpg]

Sent from my iris702 using the Hovatek Forum App


Reply
#2
(This post was last modified: 05-06-2017, 06:52 PM by X3non. )
(05-06-2017, 05:22 PM)Ivan_Ryouji Wrote: Hi, I need some help here.. I want to root my phone, I've spend a days tried so many methods for rooting my phone.. But all I got is nothing.. I think flashing SuperSu.zip via custom recovery is the only one way.. Here is the problem :

1. I can't connect my phone to my PC when I want to flash or read using Miracle Box even so many times I install & uninstall the driver, adb, etc. When I use the Miracle box + loader, it's only work on Adb Android mode like reboot to recovery or read info, but not work when I try to backup scatter, it say "no usbport".. What should I do..?
...

Sent from my iris702 using the Hovatek Forum App

1. vcom preloader driver is what you need to connect your phone to miracle box
2. its quite risky using the firmware from a different build without having the backup of your phone
3. region overlap error means the file or files you are attempting to flash are larger in size than the original partition size on your phone (you might want to refrain from flash whatever file that gave this error message)
4. what windows version are you currently using? 
   also note that the yellow triangle sign is as a result of install an unsigned driver. it doesn't really tell if the driver installed properly.

if the files you uploaded are from the firmware you downloaded, i suggest we keep it aside for now till you get a backup of your device.
Reply
#3
(This post was last modified: 05-06-2017, 11:57 PM by Ivan_Ryouji. )
Hey.. Finally, my problem to connect the device was solved.. I've tried to install all MTK driver & preloaders I've downloaded & they're just won't work on my PC & device.. So in my case, I try to use the driver inside the device itself, At the first time, auto install & manual install still not working.. I try again to connect my device without battery inserted then hold the power button, see if the PC showing driver installation pop up.. First, it's failed, then I try again to every usb ports. Well, it's working.. 1 ports has successfully recognize the device & installed 6580 VCOM Preloader signed.. Still I wonder why other ports won't work, so I install it manualy using the driver inside my device, go to device manager - add legacy hardware - install manually - show all devices - I scroll down rather than click have a disk, choose MediaTek because I think its the correct driver.. Install all driver there.. After that, the COM Ports showing yellow triangle, except 1 VCOM preloader port, it's always showed then disapear, so I right click that port and see notice "error 45, disconnect your device to solve problem", I reboot my PC and try to use Miracle box & it's working...! Now I can backup scatter file..
Reply
#4
(This post was last modified: 05-07-2017, 12:39 AM by Ivan_Ryouji. )
Here is the files:
Lava Iris 702 Scatter file
https://www.mediafire.com/file/nlcpen0n3...catter.txt

Lava Iris 702 stock recovery.bin
https://www.mediafire.com/file/m8xyei3f5...covery.bin
Reply
#5
That file is backup from my device with miracle box.. but SP Flashtool still showed the same error as before when I try to load scatter.. Why was that happen..? If that's so, how I flash file..?

Sent from my iris702 using the Hovatek Forum App
Reply
#6
(05-07-2017, 12:44 AM)Ivan_Ryouji Wrote: That file is backup from my device with miracle box.. but SP Flashtool still showed the same error as before when I try to load scatter.. Why was that happen..? If that's so, how I flash file..?

Sent from my iris702 using the Hovatek Forum App

You're to flash back with Miracle Box, not SP Flash tool. The scatter file isn't well formatted for SP flash tool
Reply
#7
(05-06-2017, 06:58 PM)Ivan_Ryouji Wrote: Here is the files:
Lava Iris 702 Scatter file
https://www.mediafire.com/file/nlcpen0n3...catter.txt

Lava Iris 702 stock recovery.bin
https://www.mediafire.com/file/m8xyei3f5...covery.bin

Here's Philz @ https://hovatek.com/redirect.php?link=ht...AyUVE/view
follow the rooting guide @ https://forum.hovatek.com/thread-18027.html but using your Philz
once rooted, upload a screenshot of root verification using root checker @ https://play.google.com/store/apps/detai...heck&hl=en
Reply
#8
Thanks.. I will try it now & post the screenshot after it rooted...

Sent from my iris702 using the Hovatek Forum App
Reply
#9
(This post was last modified: 05-07-2017, 02:25 PM by Ivan_Ryouji. )
Woooow... It's working perfectly... You guys are awesome... And then.. All my problem was solved... Thanks a lot Hovatek team..

[Image: 64ba9439c00c30faf61490c6ab763231.jpg]

Sent from my iris702 using the Hovatek Forum App
Reply
#10
hey guys i just want to root my lava 702 can you tell me the step by step procedures? im getting confused . thankyou

Sent from my iris702 using the Hovatek Forum App
Reply










Users browsing this thread:
1 Guest(s)