Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Tutorial] HELP ON HOW TO USE MIRACLE BOX

#1

PLEASE I NEED SOME HELP ON HOW TO USE MIRACLE BOX TO FLASH ANDROID DEVICES.. I will appreciate if anyone can put me through step by step. In the simplest way.


Reply
#2
(This post was last modified: 05-08-2017, 08:16 AM by droidmobitech. )
(05-08-2017, 02:26 AM)xsantos Wrote: PLEASE I NEED SOME HELP ON HOW TO USE MIRACLE BOX TO FLASH ANDROID DEVICES.. I will appreciate if anyone can put me through step by step. In the simplest way.

Read carefully

Miracle Box is a Chinese based flashing box with some qualcomm, hisilicon and CDMA network phones

To use miracle box , one must ascertain the type of chipset in the phone

For e.g. Mediatek chipset...infinix, tecno, Samsung clone, HTC clone,

Apparently most of the qualcomm clone are either Mediatek or Spreadtrum cpu

The Chinese based phone chipset are...

1. Mediatek
2. Spreadtrum
3. Coolsand, RDA
4. Anyka
5. Mstar
6. TI
7. ADI
8. AGERE
9. INF
10. SKY
And others

Miracle box is best on Chinese based cpu's

Especially
Mediatek, Spreadtrum and Mstar

Other miracle support are
1. Samsung --qualcomm
2. LG --qualcomm (cdma)
3. BlackBerry
4. Huawei (mediatek, hisilicon and Qualcomm)

Note Huawei has three different chipset

1. Huawei Mediatek
2. Huawei Hisilicon
3. Huawei Qualcomm

To flash A mediatek Phone e.g. Mediatek Mt6582 phone (android)

Guide

1. Open miracle box

2. Select the mediatek tab

It is advisable to read flash before you write a flash or format the phone
3. Read flash

4. In Boot Select, select boot 8 (65xx and 67xx)

5. USB cable is selected by default

6. Click on start button

7. Waiting for USB port
Nb---you must have mediatek drivers installed or if any other chipset, it drivers must be installed

8. Connect the turned off phone to initialize

9. It should start reading device hardware, check on progress bar to know the status of the operation


DMT
Reply
#3
The guide you'll need varies with the device. You could refer to https://forum.hovatek.com/thread-14106.html
Reply
#4
i downloaded the miracle box and installed the vcom drivers according to the steps in the link you posted but i get this eror whenever i try to open the miracle box software...


"cannot connect box. please check cable box"
Reply
#5
(05-10-2017, 12:09 AM)xsantos Wrote: i downloaded the miracle box and installed the vcom drivers according to the steps in the link you posted but i get this eror whenever i try to open the miracle box software...


"cannot connect box. please check cable box"

If you are using Windows 8/10, you'll need to disable drivers signature verification, see how https://forum.hovatek.com/thread-752.html

Sent from my Z10 using Hovatek mobile
Reply
#6
(05-10-2017, 12:09 AM)xsantos Wrote: i downloaded the miracle box and installed the vcom drivers according to the steps in the link you posted but i get this eror whenever i try to open the miracle box software...


"cannot connect box. please check cable box"

Unless you have the box, you should download the loader version
Reply
#7
.please give me the link to download the loader version
Reply
#8
(05-13-2017, 05:31 PM)xsantos Wrote: .please give me the link to download the loader version

Download @ https://forum.hovatek.com/thread-15700.html

Sent from my Z10 using Hovatek mobile
Reply










Users browsing this thread:
1 Guest(s)