Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] i have hp 7 voice tab

#11

(05-14-2017, 11:10 PM)innagee Wrote:
(05-14-2017, 09:22 AM)vmk Wrote:
(05-13-2017, 01:18 PM)hovatek Wrote:
(05-13-2017, 04:47 AM)vmk Wrote: YES ,i have right firmware
But i can't flash using sp flash tool
Please help , is there any other way to do flash

Connect the phone to power for a few hours so we're sure battery in't drained then retry flashing.
Consider holding volume up or down button when connecting to PC for flashing


When I connect phone to power it shows charging for some time then restarts to boot logo and then in boot loop
But even i tried after some hours of time but I can't flash

Have you tried wiping the phone in recovery using Vol up + Power key.

Sent from my Z10 using Hovatek mobile




I can't enter into recovery mode due to flashing of wrong twrp


Reply
#12
(This post was last modified: 05-15-2017, 10:33 AM by hovatek. )
(05-14-2017, 09:22 AM)vmk Wrote: When I connect phone to power it shows charging for some time then restarts to boot logo and then in boot loop
But even i tried after some hours of time but I can't flash

1. What version of Sp Flash tool are you using?
2. Try connecting for flash without holding any button
3. Can you get the phone into Fastboot?
4. Check what the phone get detected as in Device Manager then update it using https://forum.hovatek.com/thread-16839.html
Reply
#13
(05-15-2017, 10:29 AM)hovatek Wrote:
(05-14-2017, 09:22 AM)vmk Wrote: When I connect phone to power it shows charging for some time then restarts to boot logo and then in boot loop
But even i tried after some hours of time but I can't flash

1. What version of Sp Flash tool are you using?
2. Try connecting for flash without holding any button
3. Can you get the phone into Fastboot?
4. Check what the phone get detected as in Device Manager then update it using https://forum.hovatek.com/thread-16839.html


I tried flashing but it's again getting error
(B_rom error can't download da(0×7d4))
I can enter into daarvoor

But when i flash original recovery it says security denied -i think that is because of locked bootloader

What should I do
Reply
#14
(05-15-2017, 11:17 AM)vmk Wrote: I tried flashing but it's again getting error
(B_rom error can't download da(0×7d4))
I can enter into daarvoor

But when i flash original recovery it says security denied -i think that is because of locked bootloader

What should I do

I take it you mean you can enter fastboot.
Run this command
Code:
fastboot getvar unlocked

I want to see the output.
Also, you've still not told me the version of SP Flash tool you're using
Reply
#15
(05-15-2017, 11:54 PM)hovatek Wrote:
(05-15-2017, 11:17 AM)vmk Wrote: I tried flashing but it's again getting error
(B_rom error can't download da(0×7d4))
I can enter into daarvoor

But when i flash original recovery it says security denied -i think that is because of locked bootloader

What should I do

I take it you mean you can enter fastboot.
Run this command
Code:
fastboot getvar unlocked

I want to see the output.
Also, you've still not told me the version of SP Flash tool you're using


I have run the command you given but it sticks at
'.... '
at this
Actually my device is not recognized in fast boot i am using that using device vendor id. does it make any difference using like that ?
And version of sp flash tool i am using is latest i.e 5.1628
Reply
#16
(05-17-2017, 05:10 AM)vmk Wrote: I have run the command you given but it sticks at
'.... '
at this
Actually my device is not recognized in fast boot i am using that using device vendor id. does it make any difference using like that ?

I don't quite understand you
Reply
#17
(05-17-2017, 10:00 AM)hovatek Wrote:
(05-17-2017, 05:10 AM)vmk Wrote: I have run the command you given but it sticks at
'.... '
at this
Actually my device is not recognized in fast boot i am using that using device vendor id. does it make any difference using like that ?

I don't quite understand you


I can't unlock bootloader help me please
Reply
#18
(This post was last modified: 05-18-2017, 11:31 AM by hovatek. )
(05-17-2017, 04:15 PM)vmk Wrote: I can't unlock bootloader help me please

Can I see a screenshot of the commands you ran and their outputs
Reply
#19
(05-17-2017, 10:37 PM)hovatek Wrote:
(05-17-2017, 04:15 PM)vmk Wrote: I can't unlock bootloader help me please

Can I see a screenshot of the commends you ran and their outputs


Ok i will post them
Reply










Users browsing this thread:
1 Guest(s)