Sp flash tool error
Sp flash tool error
(13-05-2017, 09:33 AM)Nizami Hi, so i have an bricked Huawei Honor 3C (h10-u30). I wanted to flash it to 108 firmware , found instructions on this site http://www.carbontesla.com/2014/08/tutor...1c900b108/
I followed instuctions did everything the post said so i started Firmware-Upgrading and when the yellow line hit 100% it gave me Error:6128. i found solution i ticked DL All With CheckSum and started firmwware upgrading again. upon completionof yellow line it gave me another error: Error 1041 , i once again found the solution which said
* Delete any file with checksum in its name from the firmware folder
and Untick Da DL all with checksum
so i did that and after completion it gave me the first error 6128 witch said to tick DL All With CheckSum
i'm really confused
What should i do ?
(13-05-2017, 10:30 AM)freshtyt(13-05-2017, 09:33 AM)Nizami Hi, so i have an bricked Huawei Honor 3C (h10-u30). I wanted to flash it to 108 firmware ,
...
What should i do ?
try this
delete the checksum file, then flash using "download only"
(13-05-2017, 12:35 PM)freshtytwhat you mean "dowwnload only"(13-05-2017, 11:13 AM)Nizami i did what you said i deleted cheksum file and started download but it gae me same error (6128)
did you use download only?
and have you tried using the latest spft version?
(13-05-2017, 09:43 PM)Nizami what you mean "dowwnload only"
i pressed "download" i did it wrong ?