Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] Hotwav display blank screen after successfully flash

#1

Please I need solution, hotwav Venus x15 display blank screen after flashing


Reply
#2
(This post was last modified: 05-24-2017, 12:05 AM by innagee. )
(05-23-2017, 04:50 PM)5diamond Wrote: Please I need solution, hotwav Venus x15 display blank screen after flashing

Where did you download the ROM you've flashed?

Sent from my Z10 using Hovatek mobile
Reply
#3
From firmwarefile.com and needrom

Sent from my M5 mini using Hovatek mobile
Reply
#4
(05-24-2017, 08:57 AM)5diamond Wrote: From firmwarefile.com and needrom

Sent from my M5 mini using Hovatek mobile

Try factory reset in recovery, if persist, then look for another ROM, the one you've flashed may not be compatible with your device.
Reply
#5
(05-23-2017, 04:50 PM)5diamond Wrote: Please I need solution, hotwav Venus x15 display blank screen after flashing

Do you mean blank screen as in dead (no sign of life) or as in comes on but no display?
Reply
#6
It's power on but didn't show anything

Sent from my M5 mini using Hovatek mobile
Reply
#7
(05-25-2017, 02:11 PM)5diamond Wrote: It's power on but didn't show anything

Sent from my M5 mini using Hovatek mobile

that's an incompatible lk.bin
refer to https://forum.hovatek.com/thread-1667.html
Reply
#8
(05-25-2017, 07:13 PM)hovatek Wrote:
(05-25-2017, 02:11 PM)5diamond Wrote: It's power on but didn't show anything

Sent from my M5 mini using Hovatek mobile

that's an incompatible lk.bin
refer to https://forum.hovatek.com/thread-1667.html

The post is about the MTK devices, hotwav is spectrum device, how do I go about it

Sent from my M5 mini using Hovatek mobile
Reply
#9
(05-25-2017, 07:59 PM)5diamond Wrote: The post is about the MTK devices, hotwav is spectrum device, how do I go about it

Sent from my M5 mini using Hovatek mobile

For SPD, you'll need a different pac file
Reply
#10
(05-26-2017, 11:07 AM)hovatek Wrote:
(05-25-2017, 07:59 PM)5diamond Wrote: The post is about the MTK devices, hotwav is spectrum device, how do I go about it

Sent from my M5 mini using Hovatek mobile

For SPD, you'll need a different pac file

How do I do that

Sent from my M5 mini using Hovatek mobile
Reply










Users browsing this thread:
1 Guest(s)