Hi, Guest! Login / Register
Giveaway: Free Hovatek T-shirts, Hoodies & Cufflinks.. I WANT ONE! (Nov 25, 2017)
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Bootloader help Please

#1

Please help! I want to know my Android device bootloader status.
My device is "Intex Cloud 4G smart"
Chipset "Sc9830a"
Is my device bootloader locked or unlocked .
Can anyone please tell
Here is the link for bootloader file
https://drive.google.com/folderview?id=0...DhkWEdxbGs


Sent from my Cloud_4G_Smart using the Hovatek Forum App


Reply
#2
(05-26-2017, 10:57 PM)Shubham 987 Wrote: Please help! I want to know my Android device bootloader status.
My device is "Intex Cloud 4G smart"
Chipset "Sc9830a"
Is my device bootloader locked or unlocked .
Can anyone please tell
Here is the link for bootloader file
https://drive.google.com/folderview?id=0...DhkWEdxbGs


Sent from my Cloud_4G_Smart using the Hovatek Forum App

Setup ADB-Fastboot using https://forum.hovatek.com/thread-588.html , get the phone into fastboot then run

Code:
fastboot getvar unlocked
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#3
(05-27-2017, 11:34 AM)hovatek Wrote:
(05-26-2017, 10:57 PM)Shubham 987 Wrote: Please help! I want to know my Android device bootloader status.
My device is "Intex Cloud 4G smart"
Chipset "Sc9830a"
Is my device bootloader locked or unlocked .
Can anyone please tell
Here is the link for bootloader file
https://drive.google.com/folderview?id=0...DhkWEdxbGs


Sent from my Cloud_4G_Smart using the Hovatek Forum App

Setup ADB-Fastboot using https://forum.hovatek.com/thread-588.html , get the phone into fastboot then run

Code:
fastboot getvar unlocked


Hi Hovatek team,

I had done the same steps,
I have installed Fastboot and adb  

but when I give the command : {  fastboot getvar unlocked  }

then i can only see 3 dots (...) 
even I have waited for hours but still three dots in command promt,

even when i give command {   fastboot oem unlock  }


but I can see the device in list in fastboot mode when i give command:     {   fastboot devices      }

All other fastboot commands are working except the bootloader related commands,




Please Help !



Thanks ,
with regards...
Reply
#4
(12-09-2017, 07:51 PM)Shubham 987 Wrote: Hi Hovatek team,

I had done the same steps,
I have installed Fastboot and adb  

but when I give the command : {  fastboot getvar unlocked  }

then i can only see 3 dots (...) 
even I have waited for hours but still three dots in command promt,

even when i give command {   fastboot oem unlock  }


but I can see the device in list in fastboot mode when i give command:     {   fastboot devices      }

All other fastboot commands are working except the bootloader related commands,




Please Help !



Thanks ,
with regards...

Do you have OEM unlocking under Settings > Developer options?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#5
(12-11-2017, 10:45 AM)hovatek Wrote:
(12-09-2017, 07:51 PM)Shubham 987 Wrote: Hi Hovatek team,

I had done the same steps,
I have installed Fastboot and adb  

but when I give the command : {  fastboot getvar unlocked  }

then i can only see 3 dots (...) 
even I have waited for hours but still three dots in command promt,

even when i give command {   fastboot oem unlock  }


but I can see the device in list in fastboot mode when i give command:     {   fastboot devices      }

All other fastboot commands are working except the bootloader related commands,




Please Help !



Thanks ,
with regards...

Do you have OEM unlocking under Settings > Developer options?



I Do have OEM unlocking option under the developer settings,
 
but when I click on enable, then it asks for pin/password 
Then after filling password and confirming bootloader dialog, button  just  automatically get back to the disabled position, {same if i disable pin/password}

but here comes the tricky part: When i change the Se-Linux mode to permissive manually then button in oem unlock option gets on the position of enabled!

I don't whats causing this!

Kindly Help!
Reply
#6
(12-11-2017, 09:05 PM)Shubham 987 Wrote: I Do have OEM unlocking option under the developer settings,
 
but when I click on enable, then it asks for pin/password 
Then after filling password and confirming bootloader dialog, button  just  automatically get back to the disabled position, {same if i disable pin/password}

but here comes the tricky part: When i change the Se-Linux mode to permissive manually then button in oem unlock option gets on the position of enabled!

I don't whats causing this!

Kindly Help!

How did you change SELinux to permissive


Sent from my Infinix X510 using Hovatek Mobile
Reply
#7
(12-12-2017, 11:56 AM)maxxxiii Wrote:
(12-11-2017, 09:05 PM)Shubham 987 Wrote: I Do have OEM unlocking option under the developer settings,
 
but when I click on enable, then it asks for pin/password 
Then after filling password and confirming bootloader dialog, button  just  automatically get back to the disabled position, {same if i disable pin/password}

but here comes the tricky part: When i change the Se-Linux mode to permissive manually then button in oem unlock option gets on the position of enabled!

I don't whats causing this!

Kindly Help!

How did you change SELinux to permissive


Sent from my Infinix X510 using Hovatek Mobile


with the help of [SE-LINUX MODE CHANGER]application, or sometimes i do it with terminal emulator!

hereis screenshot of fastboot commands [Image: hn43qt]

Screenshot

Attached Files
.png   Screenshot (166).png (Size: 719.71 KB / Downloads: 4)
Reply
#8
(12-13-2017, 09:00 PM)Shubham 987 Wrote: with the help of [SE-LINUX MODE CHANGER]application, or sometimes i do it with terminal emulator!

hereis screenshot of fastboot commands [Image: hn43qt]

Screenshot

You need to find out which fastboot commands are available for your device (including hidden).
Can I see a screenshot of your blocks map
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#9
(Yesterday, 11:38 AM)hovatek Wrote:
(12-13-2017, 09:00 PM)Shubham 987 Wrote: with the help of [SE-LINUX MODE CHANGER]application, or sometimes i do it with terminal emulator!

hereis screenshot of fastboot commands [Image: hn43qt]

Screenshot

You need to find out which fastboot commands are available for your device (including hidden).
Can I see a screenshot of your blocks map

Are you talking about this, screenshot
.png   Screenshot (167).png (Size: 146.55 KB / Downloads: 4)
Reply
#10
(Yesterday, 12:34 PM)Shubham 987 Wrote: Are you talking about this, screenshot

No, the one at https://forum.hovatek.com/thread-11203.html
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)