Hi, Guest! Login / Register
Giveaway: Free Hovatek T-shirts, Hoodies & Cufflinks.. I WANT ONE! (Nov 25, 2017)
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Bricked gionee ctrl V5

#1

Hello !

I'm using gionee ctrl v5 & my mobile is soft bricked now ! I tried to flash stock rom using sp flash tool but no use ! Still stucks at bootloop & now i can access only to system recovery mode ! I tried to install twrp via adb side load nothing works ! Also tried installing via sd card in recovery mode nothing works ! Any help ! Thanks in advance !

Can anyone help me by sending a backup rom for gionee ctrl v5 !

Sent from my Moto G (5) Plus using the Hovatek Forum App


Reply
#2
(05-30-2017, 01:11 PM)Ajith Wrote: Hello !

I'm using gionee ctrl v5 & my mobile is soft bricked now ! I tried to flash stock rom using sp flash tool but no use ! Still stucks at bootloop & now i can access only to system recovery mode ! I tried to install twrp via adb side load nothing works ! Also tried installing via sd card in recovery mode nothing works ! Any help ! Thanks in advance !

Can anyone help me by sending a backup rom for gionee ctrl v5 !

Sent from my Moto G (5) Plus using the Hovatek Forum App

Were you able to successfully flash the firmware in SP Flash tool or not?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#3
No i flashed it after everything has been done but it still stucks on the logo

Sent from my Moto G (5) Plus using the Hovatek Forum App
Reply
#4
I bought this mobile in india so the S/W version doesnt matches with the stock rom which i can able to download from web !

I tried flashing with the sp tool which comes inside the stock rom, after few mins a pop up says download ok, but still nothing works the mobile still stuck at boot loop.

On using latest sp tool it says PMT changed for the rom; it must be downloaded.
I tried formatting & did firmware upgrade but still nothing works !

Sent from my Moto G (5) Plus using the Hovatek Forum App
Reply
#5
(05-31-2017, 11:36 AM)Ajith Wrote: I bought this mobile in india so the S/W version doesnt matches with the stock rom which i can able to download from web !

I tried flashing with the sp tool which comes inside the stock rom, after few mins a pop up says download ok, but still nothing works the mobile still stuck at boot loop.

On using latest sp tool it says PMT changed for the rom; it must be downloaded.
I tried formatting & did firmware upgrade but still nothing works !

Sent from my Moto G (5) Plus using the Hovatek Forum App

1. What was wrong with the phone before you decided to flash and how did it start?
2. Have you tried doing a factory reset in recovery mode?
3. Where did you download the firmware from ?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#6
(05-31-2017, 07:18 PM)hovatek Wrote: 1. What was wrong with the phone before you decided to flash and how did it start?
2. Have you tried doing a factory reset in recovery mode?
3. Where did you download the firmware from ?
  Ajith

1.Initially my mobile was running with Android 4.2.2, i tried to update OTA through system update, it successfully downloaded OTA (4.4) but doesn't installed,it just rebooted & ran back the same 4.2.2 then i tried to go recovery mode but my mobile doesn't run recovery mode on pressing vol up + power but i can access to factory mode vol down + power then i did a factory reset & tried to install OTA but no use ! so i decided to flash a stock rom using sp tool.

2.yes, i did a factory reset in factory mode as well as recovery mode. (After flashing a stock rom using sp tool i can able to access system recovery mode but stuck at bootloop, now i cant able to access factory mode)

3.I downloaded the stock rom from <firmwarefile.com/gionee-v5>
After flashed and stuck at bootloop then only i get to know the stock rom's S/W version doesn't matches the phone's S/w version.

My Device H/W version :V5_Mainboard_P2
                S/W version : V5_0202_V5695

Using latest sp tool:

I did "format+download" loads to 100% & says download ok but no use,

I did "firmware upgrade" loads to 100% & says download ok but no use,

I did "auto format except bootloader"- format completes & clicked "download only" it says  "PMT changed for the rom; it must be downloaded. try format+download"
Reply
#7
(This post was last modified: 06-01-2017, 07:55 PM by hovatek. )
(06-01-2017, 02:32 PM)Ajith Wrote:   Ajith

1.Initially my mobile was running with Android 4.2.2, i tried to update OTA through system update, it successfully downloaded OTA (4.4) but doesn't installed,it just rebooted & ran back the same 4.2.2 then i tried to go recovery mode but my mobile doesn't run recovery mode on pressing vol up + power but i can access to factory mode vol down + power then i did a factory reset & tried to install OTA but no use ! so i decided to flash a stock rom using sp tool.

2.yes, i did a factory reset in factory mode as well as recovery mode. (After flashing a stock rom using sp tool i can able to access system recovery mode but stuck at bootloop, now i cant able to access factory mode)

3.I downloaded the stock rom from <firmwarefile.com/gionee-v5>
After flashed and stuck at bootloop then only i get to know the stock rom's S/W version doesn't matches the phone's S/w version.

My Device H/W version :V5_Mainboard_P2
                S/W version : V5_0202_V5695

Using latest sp tool:

I did "format+download" loads to 100% & says download ok but no use,

I did "firmware upgrade" loads to 100% & says download ok but no use,

I did "auto format except bootloader"- format completes & clicked "download only" it says  "PMT changed for the rom; it must be downloaded. try format+download"

This must mean the firmware you're flashing is for a different Build as I can see @ https://forum.hovatek.com/thread-389.html
Can you get access to a working phone of the same model and Build as yours i.e 0202 V****
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#8
(06-01-2017, 07:54 PM)hovatek Wrote: This must mean the firmware you're flashing is for a different Build  as I can see @ https://forum.hovatek.com/thread-389.html
Can you get access to a working phone of the same model and Build as yours i.e 0202 V****
  
    There is no stock firmware available in web which matches with my s/w version
 Also i don't have any access to the working phone of the same model & build.
Reply
#9
As the stock rom doesn't matches the s/w version of mine i cant use sp tool anymore
But i can access to system recovery mode i tried to install stock rom & custom rom (cyanogenmod 12.1 , Dark L , Mystic OS v6) exclusively for gionee ctrl v5 & clones but nothing works when installing from sd card in recovery mode & via adb sideload, it says installation aborted.
 
 if i am right the custom rom will install only on using custom recovery like cwm,twrp & phliz. i tried to install twrp using sp tool but no use.
can you help by sending a working backup rom for my model / help me to install any one of the custom recovery to install custom rom.


i tried to install cwm using mtkdroid tool as mentioned by the following link but my mobile doesn't detect & created a scatter file so i cant able to flash boot & recovery  
https://forum.hovatek.com/thread-183.html?_e_pi_=7%2CPAGE_ID10%2C7684659661
Reply
#10
(06-02-2017, 08:47 AM)Ajith Wrote: As the stock rom doesn't matches the s/w version of mine i cant use sp tool anymore
But i can access to system recovery mode i tried to install stock rom & custom rom (cyanogenmod 12.1 , Dark L , Mystic OS v6) exclusively for gionee ctrl v5 & clones but nothing works when installing from sd card in recovery mode & via adb sideload, it says installation aborted.
 
 if i am right the custom rom will install only on using custom recovery like cwm,twrp & phliz. i tried to install twrp using sp tool but no use.
can you help by sending a working backup rom for my model / help me to install any one of the custom recovery to install custom rom.


i tried to install cwm using mtkdroid tool as mentioned by the following link but my mobile doesn't detect & created a scatter file so i cant able to flash boot & recovery  
https://forum.hovatek.com/thread-183.html?_e_pi_=7%2CPAGE_ID10%2C7684659661

Upload the stock recovery.img and scatter file.
Also state the Build number and Android version of the firmware you're uploading these files frfom
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)