Hi, Guest! Login / Register

New Arrivals! Android Smartwatches. Save up to 10%. Waterproof + Free shipping available.... CHECKOUT! (Feb, 2018)
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Development] How to root the Gionee A1

#1
(This post was last modified: 10-15-2017, 08:01 AM by hovatek. )

[Image: Hovatek-How-to-root-Gionee-A1.jpg]

The Gionee A1 (e.g A1 0301 V6107) is powered by the MT6755 (Mediatek Helio P10) SoC and runs on Android 7 (Nougat).

How can I root my Gionee A1?

There are two main steps:
  • Unlocking the Bootloader of the Gionee A1
  • Flashing the Hovatek Philz recovery.img and SuperSU.zip
Procedure

Code:
fastboot boot recovery.img
  • The phone should automatically boot into Philz recovery mode
  • In Philz recovery, you use the Volume buttons to navigate and Power button to select
  • Select Install Zip
  • Navigate to the location of the SuperSU2.78.zip on the SD Card and select it
  • Wait till flashing is complete
  • If you are prompted to fix root, select No
  • Reboot the phone normally
  • Confirm Root by installing and running Root Checker
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#2
(05-30-2017, 07:00 PM)hovatek Wrote: [Image: Hovatek-How-to-root-Gionee-A1.jpg]

The Gionee A1 (e.g A1 0301 V6107) is powered by the MT6755 (Mediatek Helio P10) SoC and runs on Android 7 (Nougat).

How can I root my Gionee A1?

There are two main steps:
  • Unlocking the Bootloader of the Gionee A1
  • Flashing the Hovatek Philz recovery.img and SuperSU.zip
Procedure

Code:
fastboot boot recovery.img
  • The phone should automatically boot into Philz recovery mode
  • In Philz recovery, you use the Volume buttons to navigate and Power button to select
  • Select Install Zip
  • Navigate to the location of the SuperSU2.78.zip on the SD Card and select it
  • Wait till flashing is complete
  • If you are prompted to fix root, select No
  • Reboot the phone normally
  • Confirm Root by installing and running Root Checker

what about formatting total i`m unable to wipe boot i need to install custom roms in this device please help me to get that much closer
Reply
#3
(06-09-2017, 02:25 PM)chaitumtx Wrote: what about formatting total i`m unable to wipe boot i need to install custom roms in this device please help me to get that much closer

I don't quite understand you
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#4
(06-09-2017, 09:41 PM)hovatek Wrote:
(06-09-2017, 02:25 PM)chaitumtx Wrote: what about formatting total i`m unable to wipe boot i need to install custom roms in this device please help me to get that much closer

I don't quite understand you
When I tried to wipe full rom it's unable to wipe boot using twrp what your ported for gionee a1
Reply
#5
(06-10-2017, 01:31 PM)chaitumtx Wrote: When I tried to wipe full rom it's unable to wipe boot using twrp what your ported for gionee a1

please create a new thread for this issue. as its deviating from the original topic
see https://forum.hovatek.com/thread-514.html for how to create a thread
Reply
#6
I have download the TWRP file and successfully root my gionee A1 64 gb variant phone. then i download "buildprop editor" and delete "salestrack.gi" and salestrack.gi2. and remove that 4 number that is send sms from my phone using "builprop editor". sms sending problem is completely solved.  but my navigation buttons & fingerprint scanner is not working. 

what to do for navigation buttons & fingerprint issue now plz help.
Reply
#7
(This post was last modified: 11-13-2017, 05:51 PM by hovatek. )
(11-13-2017, 09:54 AM)riyedvai Wrote: I have download the TWRP file and successfully root my gionee A1 64 gb variant phone. then i download "buildprop editor" and delete "salestrack.gi" and salestrack.gi2. and remove that 4 number that is send sms from my phone using "builprop editor". sms sending problem is completely solved.  but my navigation buttons & fingerprint scanner is not working. 

what to do for navigation buttons & fingerprint issue now plz help.

Is it editing Build.prop that caused this? If yes then the guide @ https://journal.hovatek.com/how-to-stop-...oid-phone/ doesn't require editing build.prop
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#8
Am unable to install supersu in the recovery, it's writing "failed to mount storage", please help me, am stock there
Reply
#9
(01-27-2018, 10:36 AM)gbenga Raphael Wrote: Am unable to install supersu in the recovery, it's writing "failed to mount storage", please help me, am stock there

which particular recovery gave you this error message?
and did you try the alt custom recovery?
Reply









Users browsing this thread:
1 Guest(s)