Hi, Guest! Login / Register
Giveaway: Free Hovatek T-shirts, Hoodies & Cufflinks.. I WANT ONE! (Nov 25, 2017)
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Hot 4 Pro dead (x556) dead after flashing stock rom

#11

(06-06-2017, 07:47 PM)hovatek Wrote:
(06-06-2017, 10:55 AM)sjaychill Wrote: I get Dram failed error

Sent from my TECNO-Y6 using Hovatek Forum

Can I see a full screenshot of the error message

[Image: 2f4277626812660e5e576ab3d055e80f.jpg]

Sent from my TECNO-Y6 using Hovatek Forum


Reply
#12
[Image: fcc0ab416b7dc3c4dc24d5537354bf19.jpg]
The Cpu got read as MT6735 by miracle box... Meanwhile the scatter file is labeled MT6737... Could this be the fault??

Sent from my TECNO-Y6 using Hovatek Forum
Reply
#13
(This post was last modified: 06-08-2017, 11:29 AM by hovatek. )
(06-08-2017, 01:38 AM)sjaychill Wrote: The Cpu got read as MT6735 by miracle box... Meanwhile the scatter file is labeled MT6737... Could this be the fault??

Sent from my TECNO-Y6 using Hovatek Forum

That firmware isn't compatible with your build. Yours appears to be a different variant
In Miracle Box, select readinfo and share a screenshot of the output
BTW, can you get access to a working Hot 4 Pro?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#14
(06-08-2017, 11:10 AM)hovatek Wrote:
(06-08-2017, 01:38 AM)sjaychill Wrote: The Cpu got read as MT6735 by miracle box... Meanwhile the scatter file is labeled MT6737... Could this be the fault??

Sent from my TECNO-Y6 using Hovatek Forum

That firmware isn't compatible with your build. Yours appears to be a different variant
In Miracle Box, select readinfo and share a screenshot of the output
BTW, can you get access to a working Hot 4 Pro?

The Miracle box always crashes before it able to get a full reading... The screenshot above is all I'm able to get.

No.. I can't get a working Hot 4 Pro...
Pls help out... It's kinda frustrating

Sent from my TECNO-Y6 using Hovatek Forum
Reply
#15
(This post was last modified: 06-08-2017, 06:23 PM by hovatek. )
(06-08-2017, 01:03 PM)sjaychill Wrote: The Miracle box always crashes before it able to get a full reading... The screenshot above is all I'm able to get.

No.. I can't get a working Hot 4 Pro...
Pls help out... It's kinda frustrating

Sent from my TECNO-Y6 using Hovatek Forum

The closest variant to yours I've found here is the OP's own @ https://forum.hovatek.com/thread-16663.html
You'll need a backup from a phone of your exact variant.
I believe you have 2 firmware
X556-H371A1-M-160906V70 phone went dead
X556-H371A1-M-161221V133 mismatch error
correct?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#16
(06-08-2017, 06:16 PM)hovatek Wrote:
(06-08-2017, 01:03 PM)sjaychill Wrote: The Miracle box always crashes before it able to get a full reading... The screenshot above is all I'm able to get.

No.. I can't get a working Hot 4 Pro...
Pls help out... It's kinda frustrating

Sent from my TECNO-Y6 using Hovatek Forum

The closest variant to yours I've found here is the OP's own @ https://forum.hovatek.com/thread-16663.html
You'll need a backup from a phone of your exact variant.
I believe you have 2 firmware
X556-H371A1-M-160906V70 phone went dead
X556-H371A1-M-161221V133 mismatch error
correct?

Uhm... I'm not entirely sure...
But from what you're saying there's two different firmwares right?

Sent from my TECNO-Y6 using Hovatek Forum
Reply
#17
Thank you soo much.
Found the solution over here.. http://adf.ly/1mK6Ob

Sent from my TECNO-Y6 using Hovatek Forum
Reply
#18
(06-09-2017, 05:57 AM)sjaychill Wrote: Thank you soo much.
Found the solution over here.. http://adf.ly/1mK6Ob

Sent from my TECNO-Y6 using Hovatek Forum

That's the one listed @ https://forum.hovatek.com/thread-533.html , thought you said you'd already tried it.
Glad your phone is fixed now
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)