Hi, Guest! Login / Register
Giveaway: Free Hovatek T-shirts, Hoodies & Cufflinks.. I WANT ONE! (Nov 25, 2017)
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Fotola m9+ flashing method

#11

i if


Envoyé de mon iPhone en utilisant Hovatek Forum


Reply
#12
The phohe won't enter into bootloader mode when connected. Funny fact i have tried all possible volume power button combinations but it has no recovery mode too


Envoyé de mon iPhone en utilisant Hovatek Forum
Reply
#13
(This post was last modified: 06-09-2017, 10:43 PM by hovatek. )
(06-09-2017, 04:14 PM)alimalamm Wrote: The phohe won't enter into bootloader mode when connected. Funny fact i have tried all possible volume power button combinations but it has no recovery mode too


Envoyé de mon iPhone en utilisant Hovatek Forum

Lets stick with flashing the pac file first, before recovery.
What version of Upgrade Download tool are you using? Hope its the latest
Also, take note of what the device gets detected as in Device manager then update that driver using the guide @ https://forum.hovatek.com/thread-16839.html
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#14
I did disable driver signature on win10 64bit. I installed the drivers and it was successfully installed. I even reinstalled the adb drivers but still when i want to flash, its still stuck at waiting while the phone is charging. When you flash other spreadrum phones, you always press and hold vol up or down inorder for it to begin the flash process. But with this phone. Non of this works. Even if i press the button it keeps charging

Envoyé de mon SM-G386T1 avec Hovatek mobile
Reply
#15
(06-13-2017, 07:07 AM)alimalamm Wrote: I did disable driver signature on win10 64bit. I installed the drivers and it was successfully installed. I even reinstalled the adb drivers but still when i want to flash, its still stuck at waiting while the phone is charging. When you flash other spreadrum phones, you always press and hold vol up or down inorder for it to begin the flash process. But with this phone. Non of this works. Even if i press the button it keeps charging

Envoyé de mon SM-G386T1 avec Hovatek mobile

its either a driver or usb issue
launch device manager then connect the phone to PC while off. What does the phone get detected as?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#16
It gets detected as a unknown device sprd

Envoyé de mon SM-G386T1 avec Hovatek mobile
Reply
#17
(06-13-2017, 12:02 PM)alimalamm Wrote: It gets detected as a unknown device sprd

Envoyé de mon SM-G386T1 avec Hovatek mobile

Right-click and uninstall the "unknown device sprd" then reconnect the phone. What does it get detected as again
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)