Hovatek Forum MOBILE Android Fotola m9+ flashing method
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Fotola m9+ flashing method

Fotola m9+ flashing method

Pages (2): Previous 1 2
alimalamm
alimalamm
alimalamm
Senior Member
395
09-06-2017, 04:10 PM
#11



i if


Envoyé de mon iPhone en utilisant Hovatek Forum
alimalamm
alimalamm
alimalamm
Senior Member
395
09-06-2017, 04:14 PM
#12
The phohe won't enter into bootloader mode when connected. Funny fact i have tried all possible volume power button combinations but it has no recovery mode too


Envoyé de mon iPhone en utilisant Hovatek Forum
hovatek
hovatek
hovatek
Administrator
49,570
09-06-2017, 10:42 PM
#13
(09-06-2017, 04:14 PM)alimalamm The phohe won't enter into bootloader mode when connected. Funny fact i have tried all possible volume power button combinations but it has no recovery mode too


Envoyé de mon iPhone en utilisant Hovatek Forum

Lets stick with flashing the pac file first, before recovery.
What version of Upgrade Download tool are you using? Hope its the latest
Also, take note of what the device gets detected as in Device manager then update that driver using the guide @ https://www.hovatek.com/forum/thread-16839.html
This post was last modified: 09-06-2017, 10:43 PM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
alimalamm
alimalamm
alimalamm
Senior Member
395
13-06-2017, 07:07 AM
#14
I did disable driver signature on win10 64bit. I installed the drivers and it was successfully installed. I even reinstalled the adb drivers but still when i want to flash, its still stuck at waiting while the phone is charging. When you flash other spreadrum phones, you always press and hold vol up or down inorder for it to begin the flash process. But with this phone. Non of this works. Even if i press the button it keeps charging

Envoyé de mon SM-G386T1 avec Hovatek mobile
hovatek
hovatek
hovatek
Administrator
49,570
13-06-2017, 11:13 AM
#15



(13-06-2017, 07:07 AM)alimalamm I did disable driver signature on win10 64bit. I installed the drivers and it was successfully installed. I even reinstalled the adb drivers but still when i want to flash, its still stuck at waiting while the phone is charging. When you flash other spreadrum phones, you always press and hold vol up or down inorder for it to begin the flash process. But with this phone. Non of this works. Even if i press the button it keeps charging

Envoyé de mon SM-G386T1 avec Hovatek mobile

its either a driver or usb issue
launch device manager then connect the phone to PC while off. What does the phone get detected as?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
alimalamm
alimalamm
alimalamm
Senior Member
395
13-06-2017, 12:02 PM
#16
It gets detected as a unknown device sprd

Envoyé de mon SM-G386T1 avec Hovatek mobile
hovatek
hovatek
hovatek
Administrator
49,570
13-06-2017, 05:47 PM
#17
(13-06-2017, 12:02 PM)alimalamm It gets detected as a unknown device sprd

Envoyé de mon SM-G386T1 avec Hovatek mobile

Right-click and uninstall the "unknown device sprd" then reconnect the phone. What does it get detected as again

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Pages (2): Previous 1 2
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram