TWRP Or CWM for Mobicel Plum
TWRP Or CWM for Mobicel Plum
(12-06-2017, 01:00 PM)mikrotik I'm requesting a TWRP OR CWM to be ported for my Mobicel Plum running 6.0. Further details about the device will come from the screenshots.
The stock recovery, boot and scatter file can be downloaded from here http://dl.dropboxusercontent.com/1/view/...otScat.zip
...
(15-06-2017, 01:23 AM)mikrotik Okay let me be honest, i was overwhelmed when i saw your reply containing a link of my ported CWM,therefore i didn't even notice that i should follow the guide of rooting the Gionee M5 mini on the given link
So i jumped and downloaded the ported CWM and used fastboot and adb shell,so I guess that's why after flashing i still saw the stock recovery.
So before following the said procedure i need to know the following:-
1. The said procedure (Gionee M5 mini), You gave the poster a ported CWM, preloader, and a Scatter file
2. You gave me only the ported CWM, and a Scatter file, WITHOUT the Preloader, so I'm confused that the folder containing my ported CWM does not contain a preloader(maybe it's because i never dumped it in the first place) so i won't replace any previously available preloader on my ported CWM folder with the one taken from my ROM dump
3. So should have i uploaded my preloader with my stock recovery in the first place before you ported it?
The following is what i should do
==========================
a) Dump my preloader so that i will paste it into the folder containing my ported CWM, right?
b) Flash both the preloader and the ported CWM while they are with the Scatter file contained in the CWM folder you gave me(NOT THE ONE THAT CAME AFTER DUMPING THE PRELOADER). Right?
c)Boot into recovery and flash supersu zip,right?
Wanna be sure, before doing such challenging task
(16-06-2017, 05:17 PM)mikrotik I did backup my preloader, copied it to the folder of the cwm you ported, loaded the scatter in that same folder and when I'm flashing, only the recovery that was visible to be flashed. The preloader that I had just dumped and pasted to the said folder didn't show up. So I flashed the recovery, and when I booted to recovery I found it to be still stock. Would you try porting it again?
(17-06-2017, 02:17 AM)mikrotik Must I delete/ or replace the existing scatter file in the cwm folder with the one coming from my preloader dump?