[Please help] MY INFINIX NOTE 3 X601 ALWAYS BOOT TO RECOVERY
[Please help] MY INFINIX NOTE 3 X601 ALWAYS BOOT TO RECOVERY
(17-06-2017, 09:21 AM)degreatone I HAVE A PECULIAR PROBLEM! I have an Infinix Note 3 X601, updated to Android N, Rooted and Philz Touch 6. 59, 0 custom recovery installed. Problem began when I tried to factory reset it from within the settings, the phone rebooted to recovery to wipe the data, and since then it wont boot to system again, whenever i try to boot it to system, it will go to recovery. if i connect it to pc, the pc wont recognise it, the pc will show a message that the USB device is not recodnisd, and the phone will boot to recovery again.
i tried to reflash the stock firmware using sp flashtool and it always fails as the system will not recognise the phone, even though i have the required mtk drivers installed.
i tried to flash this https://androidhq254.blogspot.com.ng...te-3-x601.html and http://bbs.infinixmobility.com/thread-149453-3-1.html custom roms using the custom recovery, they all fail mid way.
i will appreciate any help i can get in reviving this phone. thanks in advance
(17-06-2017, 10:26 AM)hovatek(17-06-2017, 09:21 AM)degreatone I HAVE A PECULIAR PROBLEM! I have an Infinix Note 3 X601, updated to Android N, Rooted and Philz Touch 6. 59, 0 custom recovery installed. Problem began when I tried to factory reset it from within the settings, the phone rebooted to recovery to wipe the data, and since then it wont boot to system again, whenever i try to boot it to system, it will go to recovery. if i connect it to pc, the pc wont recognise it, the pc will show a message that the USB device is not recodnisd, and the phone will boot to recovery again.
i tried to reflash the stock firmware using sp flashtool and it always fails as the system will not recognise the phone, even though i have the required mtk drivers installed.
i tried to flash this https://androidhq254.blogspot.com.ng...te-3-x601.html and http://bbs.infinixmobility.com/thread-149453-3-1.html custom roms using the custom recovery, they all fail mid way.
i will appreciate any help i can get in reviving this phone. thanks in advance
Must be a problem mounting your /system.
Power off the phone for 15 minutes then attempt booting up normally
BTW, what made you decide to do a Factory Reset in the first place?
(17-06-2017, 03:42 PM)degreatoneTry flashing it using different pc and different USB cable.(17-06-2017, 10:26 AM)hovatek(17-06-2017, 09:21 AM)degreatone I HAVE A PECULIAR PROBLEM! I have an Infinix Note 3 X601, updated to Android N, Rooted and Philz Touch 6. 59, 0 custom recovery installed. Problem began when I tried to factory reset it from within the settings, the phone rebooted to recovery to wipe the data, and since then it wont boot to system again, whenever i try to boot it to system, it will go to recovery. if i connect it to pc, the pc wont recognise it, the pc will show a message that the USB device is not recodnisd, and the phone will boot to recovery again.
i tried to reflash the stock firmware using sp flashtool and it always fails as the system will not recognise the phone, even though i have the required mtk drivers installed.
i tried to flash this https://androidhq254.blogspot.com.ng...te-3-x601.html and http://bbs.infinixmobility.com/thread-149453-3-1.html custom roms using the custom recovery, they all fail mid way.
i will appreciate any help i can get in reviving this phone. thanks in advance
Must be a problem mounting your /system.
Power off the phone for 15 minutes then attempt booting up normally
BTW, what made you decide to do a Factory Reset in the first place?
yes i too believe it has to do with mounting system partition, when i try flashing custom rom via recovery it shows error with info regarding that.
Fast charging sopped after i upgraded to Android N, thats why i did factory reset.
i left it over night, even this morning when i on it, it booted to recovery. Any idea on how i can fix it pls?
(18-06-2017, 04:08 AM)degreatone I have tried that already, same result. the problem is, immediately i connect the phone the pc will show a message that the usb device is not recognised and the phone will boot to recovery. i even tried re-installing the mtk driverswhen i try to flash a rom through recovery it shows:
(18-06-2017, 02:05 PM)degreatone when i try to flash a rom through recovery it shows:
mount system partition
mount: failed to mount /dev/block/platform/mtk-mdc.0/11230000.mdc.0/by-name/system at /system: no such file or directory
unmount system partition
unmount of /system failed: no such volume
format system partition
E:Error in /storage/sdcard/........
(status0)
installation aborted
what do you make of this pls?
(18-06-2017, 09:38 PM)hovatekYes i have access to a working Note 3, are you suggesting i make a nandroid backup and restore it on mine?(18-06-2017, 02:05 PM)degreatone when i try to flash a rom through recovery it shows:
mount system partition
mount: failed to mount /dev/block/platform/mtk-mdc.0/11230000.mdc.0/by-name/system at /system: no such file or directory
unmount system partition
unmount of /system failed: no such volume
format system partition
E:Error in /storage/sdcard/........
(status0)
installation aborted
what do you make of this pls?
Can you get access to a working X601? Thinking you try Miracle Box
BTW, did you try using firmware upgrade in SP Flash tool
(19-06-2017, 04:29 PM)degreatone Yes i have access to a working Note 3, are you suggesting i make a nandroid backup and restore it on mine?
I have tried firmware upgrade, the problem is doesnt recognise the phone when connected, so sp flashtool wont detect it
(19-06-2017, 08:14 PM)hovatek(19-06-2017, 04:29 PM)degreatone Yes i have access to a working Note 3, are you suggesting i make a nandroid backup and restore it on mine?
I have tried firmware upgrade, the problem is doesnt recognise the phone when connected, so sp flashtool wont detect it
Backup the working X601 in scatter format using Miracle Box @ https://www.hovatek.com/forum/thread-13347.html
The USB recognized issue could be one of 3 things
1. USB port, Cord or PC port issue (try another cord and PC)
2. Driver issue (Power off then connect to PC while holding Volume up or down button)
3. Emmc chip issue (has to be changed)