Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Chinese Mediatek 6580 LP 5.1 partition access in recovery mode

#1

Hi,
  
     "ticket number is #308497".
    I have chinese smartwatch with mt6580 and LP 5.1. Its a custom rom so I dont have TWER recovery and I cant dump   system.img and boot.img using ADB. I have this full custom rom so I can flash the watch in Sp Flash Tool. I am looking for any idea (software or some hardware like JTAG or some "magic box") how to get access to the partitions on recovery mode.
Key point is I want make my own custom rom on smartwatch and safe it on my PC.

Appreacite any answers and ideas.


Reply
#2
(06-24-2017, 03:24 PM)SkyMan4 Wrote: Hi,
  
     "ticket number is #308497".
    I have chinese smartwatch with mt6580 and LP 5.1. Its a custom rom so I dont have TWER recovery and I cant dump   system.img and boot.img using ADB. I have this full custom rom so I can flash the watch in Sp Flash Tool. I am looking for any idea (software or some hardware like JTAG or some "magic box") how to get access to the partitions on recovery mode.
Key point is I want make my own custom rom on smartwatch and safe it on my PC.

Appreacite any answers and ideas.

Unless the smartwatch is running on a custom recovery, there's almost nothing you can do in recovery mode
You used the phrase "custom rom" a lot. Hope you know the difference between stock rom and custom rom?
BTW
Just in case you wish to extract / backup the smartwatch's firmware, you could use Miracle Box @ https://forum.hovatek.com/thread-17759.html
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#3
(06-24-2017, 08:22 PM)hovatek Wrote:
(06-24-2017, 03:24 PM)SkyMan4 Wrote: Hi,
  
     "ticket number is #308497".
    I have chinese smartwatch with mt6580 and LP 5.1. Its a custom rom so I dont have TWER recovery and I cant dump   system.img and boot.img using ADB. I have this full custom rom so I can flash the watch in Sp Flash Tool. I am looking for any idea (software or some hardware like JTAG or some "magic box") how to get access to the partitions on recovery mode.
Key point is I want make my own custom rom on smartwatch and safe it on my PC.

Appreacite any answers and ideas.

Unless the smartwatch is running on a custom recovery, there's almost nothing you can do in recovery mode
You used the phrase "custom rom" a lot. Hope you know the difference between stock rom and custom rom?
BTW
Just in case you wish to extract / backup the smartwatch's firmware, you could use Miracle Box @ https://forum.hovatek.com/thread-17759.html

Thank you for your suggest to use Miracle Box. For this moment situation looks like this on the attached photo:
1) ADB working ok
2) Fastboot working ok
3) on bottom prompts I can see some informaion about my smartwatch like MCU or Android ver. or name so it looks like connected

but I cant make a backup of the rom when using steps as on your movie - no connection
I uninstall Preloader using USBDeview and it was automaticly re-install after smartwatch connected
So now I confused what I can do more ??

Please notice that I am almost sure I have custom rom on my smartwach (not stock rom I think coz Chinese made some add).

Any help - thanks in advance.

Attached Files
.png   2017-06-27 17_40_44-Miracle Box Ver 2.27A.png (Size: 188.03 KB / Downloads: 4)
Reply
#4
(06-27-2017, 04:52 PM)SkyMan4 Wrote: Thank you for your suggest to use Miracle Box. For this moment situation looks like this on the attached photo:
1) ADB working ok
2) Fastboot working ok
3) on bottom prompts I can see some informaion about my smartwatch like MCU or Android ver. or name so it looks like connected

but I cant make a backup of the rom when using steps as on your movie - no connection
I uninstall Preloader using USBDeview and it was automaticly re-install after smartwatch connected
So now I confused what I can do more ??

Please notice that I am almost sure I have custom rom on my smartwach (not stock rom I think coz Chinese made some add).

Any help - thanks in advance.

You know you're not supposed to hold any button when you connect to PC right?
Try updating the Smartwatches driver using https://forum.hovatek.com/thread-16839.html
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#5
(06-27-2017, 11:33 PM)hovatek Wrote:
(06-27-2017, 04:52 PM)SkyMan4 Wrote: Thank you for your suggest to use Miracle Box. For this moment situation looks like this on the attached photo:
1) ADB working ok
2) Fastboot working ok
3) on bottom prompts I can see some informaion about my smartwatch like MCU or Android ver. or name so it looks like connected

but I cant make a backup of the rom when using steps as on your movie - no connection
I uninstall Preloader using USBDeview and it was automaticly re-install after smartwatch connected
So now I confused what I can do more ??

Please notice that I am almost sure I have custom rom on my smartwach (not stock rom I think coz Chinese made some add).

Any help - thanks in advance.

You know you're not supposed to hold any button when you connect to PC right?
Try updating the Smartwatches driver using https://forum.hovatek.com/thread-16839.html

Yes, I know. Before this 5.1 mt6580 I had other watch 4.4 and mt6750 so maybe some drivers conflict. I will remove all drivers and install again just for 5.1 mt6580. Appreciate your support.
Reply










Users browsing this thread:
1 Guest(s)