Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] Miracle box not detecting tecno w3

#1

Pls I have a dead tecno w3 that av been trying to flash with miracle box but unsuccessful. Keeps saying "maybe yab driver not installed" but the drivers are correct I even tried flashing the custom TWRP recovery with sp flashtool and it was successful. Pls help. Or if you can help me upload the TWRP back up of the rom. Thanks

Sent from my Infinix X506 using Hovatek Forum


Reply
#2
(07-02-2017, 12:52 AM)walex1991 Wrote: Pls I have a dead tecno w3 that av been trying to flash with miracle box but unsuccessful. Keeps saying "maybe yab driver not installed" but the drivers are correct I even tried flashing the custom TWRP recovery with sp flashtool and it was successful. Pls help. Or if you can help me upload the TWRP back up of the rom. Thanks

Sent from my Infinix X506 using Hovatek Forum

Please try flashing it using Sp flash tool and let see
Reply
#3
It doesn't flash with sp flash tool. So just disappears. The back up is miracle box dump everything is on .bin format except the scatter file

Sent from my Infinix X506 using Hovatek Forum
Reply
#4
(07-02-2017, 12:52 AM)walex1991 Wrote: Pls I have a dead tecno w3 that av been trying to flash with miracle box but unsuccessful. Keeps saying "maybe yab driver not installed" but the drivers are correct I even tried flashing the custom TWRP recovery with sp flashtool and it was successful. Pls help. Or if you can help me upload the TWRP back up of the rom. Thanks

Sent from my Infinix X506 using Hovatek Forum

Try running Miracle on a pc running windows 7.
Reply
#5
(07-02-2017, 12:52 AM)walex1991 Wrote: Pls I have a dead tecno w3 that av been trying to flash with miracle box but unsuccessful. Keeps saying "maybe yab driver not installed" but the drivers are correct I even tried flashing the custom TWRP recovery with sp flashtool and it was successful. Pls help. Or if you can help me upload the TWRP back up of the rom. Thanks

Sent from my Infinix X506 using Hovatek Forum

It's a driver issue
Your system uses signed preloader drivers
Download mtk vcom drivers
Go to device manager
View hidden devices
Uninstall all vcom drivers and delete drivers
After that go to add legacy hardware
And browse to the location of the .inf file you downloaded and install preloader and allow that installation of un signed driver.
It will work

Sent from my ONE PLUS 5 using Hovatek mobile
Reply
#6
Bro try to connect ur USB cable to another port..I had the same problem..the solution work for me

Sent from my TECNO-W3 using Hovatek Forum
Reply
#7
(This post was last modified: 08-09-2017, 12:31 PM by mboy13. )
(07-02-2017, 05:56 PM)walex1991 Wrote: It doesn't flash with sp flash tool. So just disappears. The back up is miracle box dump everything is on .bin format except the scatter file

Sent from my Infinix X506 using Hovatek Forum

You can rename them to img extension and try using sp tool.....

As for the miracle box, download USBDeview https://usbdeview.en.uptodown.com/windows

see here how to use https://forum.hovatek.com/thread-7660.html

Run as Administrator
Select and Uninstall all MediaTek drivers
Connect you phone to the PC and hold VolUp button
Allow PC to finalize with drivers installation again

Once drivers are installed successful

Try flashing again using MiracleBox and see what happen.
Warm regards

Prof Mboy (Mboy13)
Network Engineer
CTTL, Contec Global
Birnin Kebbi,
Kebbi State

08140421345
08155755282
Reply
#8
Its driver issue...  delete the current vcom drivers and install again
Reply










Users browsing this thread:
1 Guest(s)