Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

How to fix magicBox downloading boot8 Err(2): 0_0

#1
Photo 

Please i want to know how i can fix Boot8 Err(2): 0_0



Attached Files
.png   Untitled2.png (Size: 311.49 KB / Downloads: 5)
.png   Untitled3.png (Size: 218.59 KB / Downloads: 3)
Reply
#2
(07-03-2017, 10:14 PM)john.nwanosike Wrote: Please i want to know how i can fix Boot8 Err(2): 0_0

are you trying to read the firmware from the same phone or a different phone?
it seems miracle box doesnt fully support your device.
anyways retry using 6th boot or 11th boot
BTW what exactly is wrong with the phone?
Reply
#3
(07-03-2017, 10:14 PM)john.nwanosike Wrote: Please i want to know how i can fix Boot8 Err(2): 0_0

What's wrong with your device and how did it start?
Hope your not holding any button before connecting to pc?
Reply
#4
I used this WWW://KRIZTEKBLOG.COMTECNO_DROIDPAD7CPRO firmware. At first It was successful but can not boot. When i tried trying it again.. I got that error Boot8 Err(2): 0_0
Reply
#5
(07-04-2017, 03:13 PM)innagee Wrote:
(07-03-2017, 10:14 PM)john.nwanosike Wrote: Please i want to know how i can fix Boot8 Err(2): 0_0

What's wrong with your device and how did it start?
Hope your not holding any button before connecting to pc?

No, I just plug it in and wait for it to connect. But i noticed that the USB port is now MTK Port Com(10)
Reply
#6
(07-04-2017, 05:00 PM)john.nwanosike Wrote: No, I just plug it in and wait for it to connect. But i noticed that the USB port is now MTK Port Com(10)

you didn't state what is wrong with the device?
and whats the current state of the device?
Reply
#7
(07-04-2017, 07:48 PM)freshtyt Wrote:
(07-04-2017, 05:00 PM)john.nwanosike Wrote: No, I just plug it in and wait for it to connect. But i noticed that the USB port is now MTK Port Com(10)

you didn't state what is wrong with the device?
and whats the current state of the device?

My point is that the device can not boot to boot screen anymore. And if i try using MagicBox on it, it will return that error message "downloading boot8 Err(2): 0_0" at 100% after the error message. It will not start installing the firmware to the phone. I feel that it might be a bad preloader.bin. So i dont know where to find another rom for that phone. I have checked for long, am only seeing this => KRIZTEKBLOG.COMTECNO_DROIDPAD7CPRO. Please i really need a way forward to fix this. Thanks so much.
Reply
#8
Photo 
check the attach.

Attached Files
.png   Untitled3.png (Size: 218.59 KB / Downloads: 5)
Reply
#9
(07-04-2017, 08:32 PM)john.nwanosike Wrote: check the attach.

Since the phone still gets detected in Device Manager, update what it gets detected as using the guide @ https://forum.hovatek.com/thread-16839.html
Reply










Users browsing this thread:
1 Guest(s)