Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

TECNO C8 CANNOT TURN ON AFTER FLASHING

#1

HI,
 I FLASHED MY C8 USING A STOCK ROM FROM NAIJAROM, NOW IT CANT TURN ON.

WHAT I FIRST DID WITH A SP FLASH TOOL WAS TO CLICK ON (FORMAT ALL+DOWNLOAD)..... THEN CLICKED ON DOWNLOAD.

THE WHOLE LOADING PROCESS WENT WELL AND IT TICKED SUCCUSSEFULLY DONE.


THE PROBLEM IS THAT SINCE THEN, THE PHONE CANT BOOOR DO ANYTHING.... ITS JUST DEAD.

IF I RETRY TO FLASH AGAIN A RED BAR GO UPTO 100% AND AFTER FEW SECONDS I GET AN ERROR MESSAGE

(S_FT_ENABLE_DRAM_FAIL (4032)


Please help


Reply
#2
(07-06-2017, 11:44 AM)JoeF Wrote: HI,
 I FLASHED MY C8 USING A STOCK ROM FROM NAIJAROM, NOW IT CANT TURN ON.

WHAT I FIRST DID WITH A SP FLASH TOOL WAS TO CLICK ON (FORMAT ALL+DOWNLOAD)..... THEN CLICKED ON DOWNLOAD.

THE WHOLE LOADING PROCESS WENT WELL AND IT TICKED SUCCUSSEFULLY DONE.


THE PROBLEM IS THAT SINCE THEN, THE PHONE CANT BOOOR DO ANYTHING.... ITS JUST DEAD.

IF I RETRY TO FLASH AGAIN A RED BAR GO UPTO 100% AND AFTER FEW SECONDS I GET AN ERROR MESSAGE

(S_FT_ENABLE_DRAM_FAIL (4032)


Please help

If the first flashing you did was successful then try leaving the phone on a wall charger to charge for 2-3 hours, the battery might be drained.
Reply
#3
(07-06-2017, 11:44 AM)JoeF Wrote: HI,
 I FLASHED MY C8 USING A STOCK ROM FROM NAIJAROM, NOW IT CANT TURN ON.

WHAT I FIRST DID WITH A SP FLASH TOOL WAS TO CLICK ON (FORMAT ALL+DOWNLOAD)..... THEN CLICKED ON DOWNLOAD.

THE WHOLE LOADING PROCESS WENT WELL AND IT TICKED SUCCUSSEFULLY DONE.


THE PROBLEM IS THAT SINCE THEN, THE PHONE CANT BOOOR DO ANYTHING.... ITS JUST DEAD.

IF I RETRY TO FLASH AGAIN A RED BAR GO UPTO 100% AND AFTER FEW SECONDS I GET AN ERROR MESSAGE

(S_FT_ENABLE_DRAM_FAIL (4032)


Please help

That's a compatibility problem. You'll need a firmware from a higher build

Try both variants @ https://forum.hovatek.com/thread-311.html
Reply
#4
@innagee, hovatek. thanks so much for the reply.
Well, I went straight to download the send variant and flashed it and it worked for me. My phone is now back to life. Once more thanks so much for the helpful download link

Sent from my TECNO-W3 using Hovatek Forum
Reply










Users browsing this thread:
1 Guest(s)