Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Mtn smart mini s620 succesful flash but dead

#11

(07-19-2017, 04:34 PM)alimalamm Wrote: I made a dump back up of the firmware. But all the files backed up are in bin extension. Can't flash it with sp flash tool. Need your help again

Envoyé de mon SM-G386T1 avec Hovatek mobile

You still use Miracle Box @ https://forum.hovatek.com/thread-14106.html


Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#12
I made a dump back as in your guide. But i did not tick all the boxes. I just back up the files that were already ticked and essential. Then i tried flashing it with sp flash tool and it gave me the error space not enough. Then i flashed the back up with miracle box and it succeeded. But when i switch on the phone it stops at the boot logo


Envoyé de mon iPhone en utilisant Hovatek Forum
Reply
#13
(07-22-2017, 08:42 AM)alimalamm Wrote: I made a dump back as in your guide. But i did not tick all the boxes. I just back up the files that were already ticked and essential. Then i tried flashing it with sp flash tool and it gave me the error space not enough. Then i flashed the back up with miracle box and it succeeded. But when i switch on the phone it stops at the boot logo


Envoyé de mon iPhone en utilisant Hovatek Forum

Do a factory reset in recovery mode and emmc wipe in factory mode
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#14
There is no way to make a factory reset because when i enter the recovery mode it say's " no command"


Envoyé de mon iPhone en utilisant Hovatek Forum
Reply
#15
(07-23-2017, 06:39 PM)alimalamm Wrote: There is no way to make a factory reset because when i enter the recovery mode it say's " no command"


Envoyé de mon iPhone en utilisant Hovatek Forum

Try formating userdata with miracle box

U can flash system.img from every rom u downloaded.....I mean only system.img using miracle box...

Reply
#16
(07-23-2017, 06:39 PM)alimalamm Wrote: There is no way to make a factory reset because when i enter the recovery mode it say's " no command"


Envoyé de mon iPhone en utilisant Hovatek Forum

on the no command screen, you should try different button combo to proceed to recovery mode
OR better still boot into factory mode (vol down + power button)
then wipe emmc and reboot
Reply
#17
(07-23-2017, 06:39 PM)alimalamm Wrote: There is no way to make a factory reset because when i enter the recovery mode it say's " no command"


Envoyé de mon iPhone en utilisant Hovatek Forum

Just press Power button once to proceed to recovery.
if that doesn't work then Press Power + Volume Up (in that order) and release both at the same time
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#18
I was able to flash the phone and it booted normally with no problem but when you switched it off and remove the battery and put it back then try to switch it on it won't come on. By the way i flashed the back up using miracle box and i un untick "auto decry" then i tick " firmware only"


Envoyé de mon iPhone en utilisant Hovatek Forum
Reply
#19
(07-26-2017, 06:40 AM)alimalamm Wrote: I was able to flash the phone and it booted normally with no problem but when you switched it off and remove the battery and put it back then try to switch it on it won't come on. By the way i flashed the back up using miracle box and i un untick "auto decry" then i tick " firmware only"


Envoyé de mon iPhone en utilisant Hovatek Forum

What's the present battery level?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#20
It was charged


Envoyé de mon iPhone en utilisant Hovatek Forum
Reply










Users browsing this thread:
1 Guest(s)