Hovatek Forum DOWNLOADS Android Firmware Tecno [Downloads] Tecno Camon C9 Plus / Pro Stock ROM | Firmware and Component Files
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Downloads] Tecno Camon C9 Plus / Pro Stock ROM | Firmware and Component Files

[Downloads] Tecno Camon C9 Plus / Pro Stock ROM | Firmware and Component Files

X3non
X3non
X3non
Recognized Contributor
22,062
14-07-2017, 08:08 PM
#1



Below is a collection of download links for files you would find in the flash file, firmware or stock rom for Tecno Camon C9 Plus / Pro . Its for those who need specific files and don't want to have to download the entire stock ROM / Firmware. If what you need is the complete stock ROM / Firmware then you can find the download link below also

Download Tecno C9 Plus / Pro stock rom / firmware below



Tecno Camon C9 Plus / Pro (C9-H535B1C1-M-161129V83) [Miracle Box] 


Tecno Camon C9 Plus / Pro (C9-H535B1C1-M-161026V79) [Factory / Signed]


Tecno Camon C9 Plus / Pro (C9-H535B1C1-M-161222V88) [Factory / Signed]


How to flash / unbrick a Tecno Camon C9 Plus / Pro


The firmware above is in scatter format so this means you can flash with SP Flash tool, Infinity Chinese Miracle II MTK Box,
Miracle Box (If indicated that it's a Miracle Box Dump) or any other Chinese box or tool which supports flashing in scatter format.
Before flashing, ensure that:
  1. The battery is charged to an extent and inserted into the phone
  2. The phone is powered off / switched off
  3. You have installed Mediatek Preloader USB VCOM drivers
  4. You have downloaded either parts of or the complete firmware above (depending on what you need to flash) and unzipped into a folder
  5. You have a PC and USB cord

Tecno Camon C9 Plus / Pro Core Specifications

  • Model: Tecno C9
  • 2G Network: Yes
  • 3G Network: Yes
  • 4G Network: Yes
  • Dimensions: 76.84*153.3*7.35mm
  • Display: 5.5 inches, 1920 x 1080 pixels IPS display
  • Processor: 64-bit Octa-Core 1.3 GHz
  • CPU: Mediatek MT6753
  • Graphics Processor: Mali-T720
  • RAM: 3 GB
  • Internal Storage: 32 GB
  • External Storage: MicroSD card up to 128 GB
  • Primary Camera: 13 megapixel autofocus camera with LED flash
  • Video recording: Yes
  • Secondary Camera: 13 megapixel camera with LED flash
  • Video Support: mpeg4, h.263, h.264
  • FM Radio
  • Bluetooth: v4.0
  • WiFi: Wi-Fi 802.11 b/g/n, Wi-Fi Direct, hotspot
  • GPS: Yes
  • USB: microUSB v2.0
  • Battery: 3000 mAh
This post was last modified: 05-02-2019, 10:44 PM by X3non.
onuoha12
onuoha12
onuoha12
Newbie
4
11-11-2017, 10:58 AM
#2
Tecno camon C9has a beautiful and fantastic design. It is the successor of the Camon C8 smartphone focused on photography.
awah leonard
awah leonard
awah leonard
Newbie
2
08-01-2019, 03:26 PM
#3
i flashed tecno c9 and its completely dead, i.e the phone  is completely not coming on. here is the detail of the phone
C9-H535B1C1-M-161129V83
  version:6.0
  model:TECNO-C9

 mt6753
can anyone help with the stock rom. i have tried the ones at hovatek.com but its not working
X3non
X3non
X3non
Recognized Contributor
22,062
09-01-2019, 09:51 AM
#4
(08-01-2019, 03:26 PM)awah leonard i flashed tecno c9 and its completely dead, i.e the phone  is completely not coming on. here is the detail of the phone
C9-H535B1C1-M-161129V83
  version:6.0
  model:TECNO-C9

 mt6753
can anyone help with the stock rom. i have tried the ones at hovatek.com but its not working

stick to your thread at https://www.hovatek.com/forum/thread-26353.html
This post was last modified: 09-01-2019, 10:24 AM by X3non.
27-07-2019, 05:43 PM
#5



How To flash Tecno C9 with PC only ?
xerxes
xerxes
xerxes
Senior Member
8,355
27-07-2019, 11:00 PM
#6
(27-07-2019, 05:43 PM)Mostafa Abdullah How To flash Tecno C9 with PC only ?

Download the stock ROM for your corresponding build no from the above links then follow the guide @ https://www.hovatek.com/forum/thread-159.html
smitharmstones
smitharmstones
smitharmstones
Enthusiastic Member
6
19-08-2019, 07:28 PM
#7
Hi hovatec..my tecno C9s of build number C9s-H535-M-12V53SM ( as written on the motherboard on a sticker) had a problem with bluetooth and hotspot and i decided to flash the whole firmware. I searched the firmware for tecno camon  C9s but couldnt get, i only found for c9 and c9plus. I downloaded one for tecno c9 from your link and flashed with Sp flashtool (downoad only) but after detection i got an sp error 'Not enough space' i tried again but got the same error. NOW the phone is totally dead and cant even boot up or charge. Kindly assist i get my phone working
This post was last modified: 20-08-2019, 08:02 AM by smitharmstones.
X3non
X3non
X3non
Recognized Contributor
22,062
20-08-2019, 12:25 PM
#8
(19-08-2019, 07:28 PM)smitharmstones Hi hovatec..my tecno C9s of build number C9s-H535-M-12V53SM ( as written on the motherboard on a sticker) had a problem with bluetooth and hotspot and i decided to flash the whole firmware. I searched the firmware for tecno camon  C9s but couldnt get, i only found for c9 and c9plus. I downloaded one for tecno c9 from your link and flashed with Sp flashtool (downoad only) but after detection i got an sp error 'Not enough space' i tried again but got the same error. NOW the phone is totally dead and cant even boot up or charge. Kindly assist i get my phone working

firmware for C9s is listed @ https://www.hovatek.com/forum/thread-311.html
loosen the back cover and disconnect / reconnect the battery of the device, the device will power on back to how it was; refer to https://www.hovatek.com/forum/thread-808.html then you can attempt to reflash using firmware for C9s or better still confirm the build number of the device from settings first
if you still have any other problems then create a new thread for your device issue by clicking "Ask Question" at the top
This post was last modified: 20-08-2019, 12:46 PM by X3non.
mark mambo
mark mambo
mark mambo
Newbie
2
30-08-2020, 03:15 AM
#9
(14-07-2017, 08:08 PM)X3non Below is a collection of download links for files you would find in the flash file, firmware or stock rom for Tecno Camon C9 Plus / Pro . Its for those who need specific files and don't want to have to download the entire stock ROM / Firmware. If what you need is the complete stock ROM / Firmware then you can find the download link below also

Download Tecno C9 Plus / Pro stock rom / firmware below



Tecno Camon C9 Plus / Pro (C9-H535B1C1-M-161129V83) [Miracle Box] 


Tecno Camon C9 Plus / Pro (C9-H535B1C1-M-161026V79) [Factory / Signed]


Tecno Camon C9 Plus / Pro (C9-H535B1C1-M-161222V88) [Factory / Signed]


How to flash / unbrick a Tecno Camon C9 Plus / Pro


The firmware above is in scatter format so this means you can flash with SP Flash tool, Infinity Chinese Miracle II MTK Box,
Miracle Box (If indicated that it's a Miracle Box Dump) or any other Chinese box or tool which supports flashing in scatter format.
Before flashing, ensure that:
  1. The battery is charged to an extent and inserted into the phone
  2. The phone is powered off / switched off
  3. You have installed Mediatek Preloader USB VCOM drivers
  4. You have downloaded either parts of or the complete firmware above (depending on what you need to flash) and unzipped into a folder
  5. You have a PC and USB cord

Tecno Camon C9 Plus / Pro Core Specifications

  • Model: Tecno C9
  • 2G Network: Yes
  • 3G Network: Yes
  • 4G Network: Yes
  • Dimensions: 76.84*153.3*7.35mm
  • Display: 5.5 inches, 1920 x 1080 pixels IPS display
  • Processor: 64-bit Octa-Core 1.3 GHz
  • CPU: Mediatek MT6753
  • Graphics Processor: Mali-T720
  • RAM: 3 GB
  • Internal Storage: 32 GB
  • External Storage: MicroSD card up to 128 GB
  • Primary Camera: 13 megapixel autofocus camera with LED flash
  • Video recording: Yes
  • Secondary Camera: 13 megapixel camera with LED flash
  • Video Support: mpeg4, h.263, h.264
  • FM Radio
  • Bluetooth: v4.0
  • WiFi: Wi-Fi 802.11 b/g/n, Wi-Fi Direct, hotspot
  • GPS: Yes
  • USB: microUSB v2.0
  • Battery: 3000 mAh
hello Developers and interns... My phone is 3gb 32gb storage emmc is fine ..just tried to install trp but coused a boot loop..my phones build version matches with shortbargy's but i dont wish to flash using miracle ...couse i realised it aint safe flashing a weak emmc with cracked softwares..most importantly without a box..my question is my build ends with v46..but the same specifications ,,,if i flash exluding preloader ..would it flash safley with software v88?
This post was last modified: 30-08-2020, 03:16 AM by mark mambo.
X3non
X3non
X3non
Recognized Contributor
22,062
31-08-2020, 10:12 AM
#10



(30-08-2020, 03:15 AM)mark mambo hello Developers and interns... My phone is 3gb 32gb storage emmc is fine ..just tried to install trp but coused a boot loop..my phones build version matches with shortbargy's but i dont wish to flash using miracle ...couse i realised it aint safe flashing a weak emmc with cracked softwares..most importantly without a box..my question is my build ends with v46..but the same specifications ,,,if i flash exluding preloader ..would it flash safley with software v88?

if all you did was flash a wrong twrp image then you don't need to flash a full firmware
flashing the right recovery should fix your device, backup the current firmware from the device using the guide @ https://www.hovatek.com/forum/thread-13347.html
then copy and rename boot.bin to recovery.img
use the recovery.img to port twrp for your device using the tool @ https://www.hovatek.com/forum/thread-21839.html

if you still have any other problems then create a new thread for your device issue by clicking "Ask Question" at the top
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram