[Downloads] Tecno G9 Stock ROM / Firmware and Component Files

[X3non]

Below is a collection of download links for files you would find in the flash file, firmware or stock rom for Tecno G9 Phantom pad II . Its for those who need specific files and don't want to have to download the entire stock ROM / Firmware. If what you need is the complete stock ROM / Firmware then you can find the download link below also

Download Tecno G9 stock rom / firmware below

Tecno G9 Phantom pad II (G9-T211-PIC-20140924) [Factory / Signed]

• Boot.img : [ Login / Register at the top-left corner of this page to download]
  
• Recovery.img : [ Login / Register at the top-left corner of this page to download]
  
• LK.bin : [ Login / Register at the top-left corner of this page to download]
  
• Logo.bin : [ Login / Register at the top-left corner of this page to download]
  
• Scatter.txt : [ Login / Register at the top-left corner of this page to download]
  
• Preloader.bin : [ Login / Register at the top-left corner of this page to download]
  
• Secro.img : [ Login / Register at the top-left corner of this page to download]
  
• NVRAM : N/A
  
• APDB & BPLGU / MDDB : [ Login / Register at the top-left corner of this page to download]
  
• Cache.img, Userdata.img or System.img : Download the full stock ROM / Firmware below
  
• Full stock rom : [ Login / Register at the top-left corner of this page to download]
  

How to flash / unbrick a Tecno Phantom PAD II (G9)

The firmware above is in scatter format so this means you can flash with SP Flash tool, Infinity Chinese Miracle II MTK Box,
Miracle Box (If indicated that it's a Miracle Box Dump) or any other Chinese box or tool which supports flashing in scatter format.
Before flashing, ensure that:

1. The battery is charged to an extent and inserted into the phone
   
2. The phone is powered off / switched off
   
3. You have installed Mediatek Preloader USB VCOM drivers
   
4. You have downloaded either parts of or the complete firmware above (depending on what you need to flash) and unzipped into a folder
   
5. You have a PC and USB cord
   

Tecno Phantom PAD II (G9) Core Specifications

• Model: Tecno G9
  
• 2G Network: Yes
  
• 3G Network: HSDPA 900 / 2100
  
• 4G Network: No
  
• SIM: Dual mini SIM
  
• Dimensions: 200 x 135.2 x 8.5 mm
  
• Display Type: IPS capacitive touchscreen with 16,000,000 colors
  
• Display Size: 7.85 inches, 768 x 1024 pixels, 163 pixels per inch (PPI)
  
• SD Card slot: MicroSD, up to 32GB
  
• Internal Memory: 16GB
  
• OS: Android 4.2.2 Jelly Bean
  
• Processor: 1.3GHz quad-core Cortex-A7
  
• CPU: MediaTek MT6582 chipset, Mali-400MP2 GPU
  
• RAM: 1GB
  
• WIFI: Wi-Fi 802.11 b/g/n, WIFI hotspot, Wi-Fi direct
  
• Bluetooth: Version 4.0
  
• GPS: A-GPS
  
• NFC: No
  
• USB: MicroUSB v2.0
  
• Primary Camera: 5MP, up to 2592 х 1944-pixel pictures, autofocus, Geo tagging, panorama, HDR, face and smile detection camera with LED flash
  
• Video: [email protected]
  
• Secondary Camera: 5MP, up to 2592 х 1944-pixel pictures
  
• Battery Capacity: 4200mAh Li-Ion battery
  

[favouremmanuel]

Pls my tecno G9, continues popping up and downloading on its own after flashing

Sent from my TECNO-Y6 using Hovatek Forum

[favouremmanuel]

Please my tecno G9 continues popping up and downloading on its own even after flashing. Pls need help

Sent from my TECNO-Y6 using Hovatek Forum

[innagee]

Please my tecno G9 continues popping up and downloading on its own even after flashing. Pls need help

Sent from my TECNO-Y6 using Hovatek Forum

re-flash the ROM, select Format + Download.

[favouremmanuel]

OK I will

Sent from my TECNO-Y6 using Hovatek Forum

[favouremmanuel]

But fomat+download can freeze up the device

Sent from my TECNO-Y6 using Hovatek Forum

[innagee]

But fomat+download can freeze up  the device

Sent from my TECNO-Y6 using Hovatek Forum

That's if you're not sure whether the ROM is for your device, but since you've used the ROM before it will work.

[hovatek]

But fomat+download can freeze up the device

Sent from my TECNO-Y6 using Hovatek Forum

Try firmware upgrade first