Hi, Guest! Login / Register

Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Download] Tecno Y3S Stock ROM / Firmware and Component Files

#1
(This post was last modified: 10-22-2017, 12:39 PM by hovatek. )

Below is a collection of files you would find inside the firmware or stock rom for Tecno Y3S . Its for those who need specific files and don't want to have to download the entire stock ROM / Firmware. If what you need is the complete stock ROM / Firmware then you can find the download link below also

Download Tecno Y3S stock rom / firmware below



Tecno Y3S (Y3S-G220-J1-KK-KE-SAFARICOM-20150310)


How to flash / unbrick a Tecno Y3S


The firmware above is in scatter format so this means you can flash with SP Flash tool, Infinity Chinese Miracle II MTK Box,
Miracle Box (If indicated that it's a Miracle Box Dump) or any other Chinese box or tool which supports flashing in scatter format.
Before flashing, ensure that:
  1. The battery is charged to an extent and inserted into the phone
  2. The phone is powered off / switched off
  3. You have installed Mediatek Preloader VCOM drivers using https://forum.hovatek.com/thread-440.html
  4. You have downloaded either parts of or the complete firmware above (depending on what you need to flash) and unzipped into a folder
  5. You have a PC and USB cord

Tecno Y3s Core Specifications

  • Model: Tecno Y3s
  • Display Type: Capacitive LCD touchscreen with 256,000 colors
  • Display Size: 320 x 480 pixels, 3.5 inches, ~165 PPI pixel density
  • SD Card slot: microSD, up to 32 GB
  • Internal Memory: 64 MB
  • OS: Android 2.3.5 Ginger Bread
  • Processor: 800 MHz Single-core
  • CPU: MediaTek MT6572 Chipset
  • RAM: 256MB
  • WIFI: Yes
  • Bluetooth: Yes
  • GPS: Yes, with A-GPS support
  • NFC: No
  • USB: microUSB v2.0
  • Primary Camera: 3 MP, up to 2048 x 1536 pixels
  • Video: Yes
  • Secondary Camera: No
  • Battery Capacity: Li-Ion 1400 mAh battery



Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)