Hi, Guest! Login / Register




Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Download] Tecno Camon CX Stock ROM / Firmware and Component Files

#1
(This post was last modified: 08-01-2017, 02:02 AM by X3non. )

Below is a collection of files you would find inside the firmware or stock rom for Tecno Camon CX . Its for those who need specific files and don't want to have to download the entire stock ROM / Firmware. If what you need is the complete stock ROM / Firmware then you can find the download link below also

Download Tecno CX stock rom / firmware below



Tecno Camon CX MT6755 (CX-H501D1-N-170303V91)


Tecno Camon CX MT6750 (CX-H501D1-N-170405V107)


Tecno Camon CX MT6750 (CX-H501D1-N-170214V80)


Tecno Camon CX MT6750 (CX-H501D1-N-170228V90)


How to flash / unbrick a Tecno Camon CX


The firmware above is in scatter format so this means you can flash with SP Flash tool, Infinity Chinese Miracle II MTK Box,
Miracle Box (If indicated that it's a Miracle Box Dump) or any other Chinese box or tool which supports flashing in scatter format.
Before flashing, ensure that:
  1. The battery is charged to an extent and inserted into the phone
  2. The phone is powered off / switched off
  3. You have installed Mediatek Preloader VCOM drivers using https://forum.hovatek.com/thread-440.html
  4. You have downloaded either parts of or the complete firmware above (depending on what you need to flash) and unzipped into a folder
  5. You have a PC and USB cord

Tecno Camon CX Core Specifications

  • Model: Camon CX
  • 2G Network: Yes
  • 3G Network: Yes
  • 4G Network: FDD-LTE 800 / 850 / 2100 / 1800 / 2600
  • SIM: Dual mini SIM
  • Body Dimensions: 152.8 x 75.8 x 5.6 mm
  • Display Type: IPS capacitive LCD touchscreen with 16,000,000 colors
  • Display Size: 5.5 inches, 1080 x 1920 pixels, 401 pixels per inch
  • SD Card slot: MicroSD, up to 128GB
  • Internal Memory: 16GB
  • OS: Android 7.0 Nougat
  • Processors: 1.5GHz octa-core Cortex-A53
  • CPU: MediaTek MT6750, MT6753 or MT6755 chipset, Mali-T720 MP4 GPU
  • RAM: 2GB
  • WIFI: Wi-Fi 802.11 b/g/n, Wi-Fi hotspot
  • Bluetooth: Version 4.1
  • GPS: A-GPS
  • NFC: No
  • USB: MicroUSB v2.0
  • Primary Camera: 16MP, up to 5312 x 2988-pixel-pictures, HDR, autofocus, panorama, Geo-tagging camera with LED flash
  • Video: [email protected]
  • Secondary Camera: 16MP, up to 5312 x 2988-pixel pictures, LED flash
  • Battery Capacity: 3200mAh Li-Ion battery



Reply
#2
(This post was last modified: 07-28-2017, 09:52 AM by hovatek. )
(07-19-2017, 08:56 AM)X3non Wrote: Below is a collection of files you would find inside the Tecno Camon CX firmware
....

Add preloader.bin or Full stock rom for tecno Camoc CX Build CX-H501D1-N-170424V107. My phone is completly dead.
Reply
#3
(07-23-2017, 12:41 PM)dalid.daud Wrote: Add preloader.bin or Full stock rom for tecno Camoc CX Build CX-H501D1-N-170424V107. My phone is completly dead.

it will be added once the firmware is available
Reply
#4
(This post was last modified: 07-28-2017, 09:53 AM by hovatek. )
(07-23-2017, 12:41 PM)dalid.daud Wrote: Add preloader.bin or Full stock rom for tecno Camoc CX Build CX-H501D1-N-170424V107. My phone is completly dead.


Also Need Full Firmware,

Someone Dead it by format with CM2
...

My Phone Info:
Code:
Device Brand   : TECNO
Device Model   : TECNO-CX
Device CPU     : MT6755
Device IntName : H501
Device Version : 7.0
Device Compile : 4/5/2017 3:19:31 PM
Device Project : CX-H501D1-N-170405V107
Device ExtInfo : TECNO Camon CX
Reply
#5
I download your posted full firmware & flashed it via cm2

cant flash with sp tool...

Code:
Start at : [7/27/2017 / 11:10:42 PM]
Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 29 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : BROM
DRAM configured from ScatFW!
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMB1E
[eMMC] : FLASH_CID : 150100524531424D42071C259771143D
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0xC2C76F99E48B13F33E88DE03FB1742C7
INT RAM : 0x00000000
EXT RAM : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : FULL-SPEED
Boot Ok!

ScatCFG : BaseBand : MT6755 , Project : rlk6750_65_n , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

M67BL : Check eMMC compatibility
M67BL : eMMC supported by BootLoader!

Selected forced PMT update
Build new PMT ...
Update Primary ...
Update Mirror ...
PMT update Ok!

M67BL : Flash Erase
Total blocks to Erase : 5
Erase : 0x0000000000008000-0x0000000001A80000
Erase : 0x0000000001BC8000-0x0000000004000000
Erase : 0x0000000007000000-0x0000000001000000
Erase : 0x0000000008300000-0x0000000002400000
Erase : 0x000000000AC00000-0x00000003981FBE00
Flash Erase Done, time used : 00:00:01

Processing : Writing all Flash Files
Flash Partition : PRELOADER
Flash PLC
Image Flash Ok
Flash Partition : RECOVERY
Image Flash Ok
Flash Partition : MD1IMG
Image Flash Ok
Flash Partition : MD1DSP
Image Flash Ok
Flash Partition : MD1ARM7
Image Flash Ok
Flash Partition : MD3IMG
Image Flash Ok
Flash Partition : LK
Image Flash Ok
Flash Partition : LK2
Image Flash Ok
Flash Partition : BOOT
Image Flash Ok
Flash Partition : LOGO
Image Flash Ok
Flash Partition : TEE1
Image Flash Ok
Flash Partition : TEE2
Image Flash Ok
Flash Partition : SECRO
Image Flash Ok
Flash Partition : SYSTEM
Image Flash Ok
Flash Partition : CACHE
Image Flash Ok
Flash Partition : USERDATA
Image Flash Ok
Flash Write Done, time used : 02:04:41


Done!
Elapsed: 02:04:57
Reconnect Power/Cable!

Finish at : [7/28/2017 / 1:15:40 AM




After Full Flash All Info ok but phone Still Dead...


preloader Init Done But Still Dead.

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 30 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0002
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMB1E
[eMMC] : FLASH_CID : 150100524531424D42071C259771143D
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0xC2C76F99E48B13F33E88DE03FB1742C7
INT RAM : 0x00000000
EXT RAM : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

[AP] : Initial info read Ok!

Brand : TECNO
ProdName : H501
ProdModel : TECNO Camon CX
Device : TECNO-CX
AndroidVer: 7.0
MTKxCPU : MT6755
MTKxPRJ : CX-H501D1-N-170303V91

Done!
Elapsed: 00:00:09
Reconnect Power/Cable!
Reply
#6
(07-28-2017, 05:28 AM)[email protected] Wrote: I download your posted full firmware & flashed it via cm2

cant flash with sp tool...

[code]Start at : [7/27/2017 / 11:10:42 PM]
Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 29 ]

Please, create a new thread for your phone issues @ https://forum.hovatek.com/forum-76.html
Reply
#7
this is very useful.
G O O D Heart
Reply
#8
Hello Team,

Code:
Tecno Camon CX MT6750 (CX-H501D1-N-170405V107)

This Firmware corrupted....
Not extarcted....

two time download but not extract....
Reply
#9
(08-01-2017, 06:38 PM)[email protected] Wrote: Hello Team,...

how exactly did you download the file?
Reply
#10
(08-01-2017, 06:38 PM)[email protected] Wrote: Hello Team,

Code:
Tecno Camon CX MT6750 (CX-H501D1-N-170405V107)

This Firmware corrupted....
Not extarcted....

two time download but not extract....

All firmware were tested (extracted) before uploading
Reply










Users browsing this thread:
2 Guest(s)