Hi, Guest! Login / Register




Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Download] Tecno P3 Stock ROM / Firmware and Component Files

#1
(This post was last modified: 10-22-2017, 12:21 PM by hovatek. )

Below is a collection of files you would find inside the firmware or stock rom for Tecno P3 . Its for those who need specific files and don't want to have to download the entire stock ROM / Firmware. If what you need is the complete stock ROM / Firmware then you can find the download link below also

Download Tecno P3 stock rom / firmware below



Tecno P3 (D107_CY_A1_V0.9.2_S0412)


Tecno P3 (Etisalat)


How to flash / unbrick a Tecno P3


The firmware above is in recovery mode format so this means you can flash with AIO Flasher, CWM or any other Chinese box or tool which supports flashing in fastboot mode.
Before flashing, ensure that:
  1. The battery is charged to an extent and inserted into the phone
  2. The phone is powered into fastboot or recovery mode
  3. You have installed ADB-Fastboot drivers using https://forum.hovatek.com/thread-588.html
  4. You have downloaded either parts of or the complete firmware above (depending on what you need to flash) and unzipped into a folder
  5. You have a PC and USB cord

Tecno P3 Core Specifications

  • Model: Tecno P3
  • 2G Network: Yes
  • 3G Network: HSDPA 900 / 2100
  • 4G Network: No
  • SIM: Dual mini SIM
  • Body Dimensions: 115.8 x 62 x 11.7 mm
  • Display Type: TFT capacitive touchscreen with 256,000 colors
  • Display Size: 320 x 480 pixels, 3.5 inches, 165 pixels per inch (PPI)
  • SD Card slot: MicroSD, up to 32 GB
  • Internal Memory: 512 MB
  • OS: Android 2.3.5 Gingerbread
  • Processors: 800 MHz dual-core
  • CPU:
  • RAM: 512 MB
  • WIFI Wi-Fi 802.11 b/g/n, WIFI hotspot
  • Bluetooth: Version 3.0
  • GPS: A-GPS
  • NFC: No
  • USB: MicroUSB v2.0
  • Primary Camera: 3 MP, up to 2048×1536 pixel pictures camera with LED flash
  • Video: VGA
  • Secondary Camera: 0.3 MP
  • Battery Capacity: 1400 mAh Li-Ion battery



Reply










Users browsing this thread:
1 Guest(s)