[hovatek]

Can you just port a recovery for my TECNO Cx build number ( CXAir-H3713A-N-17207V139)? So I can use SPFL. I understand that tool better.

Here's what I'll sincerely advise you do.
The firmware for your phone's build number isn't yet available so you first need to backup your firmware before you even think of rooting.
As for backing up your firmware, you can use wwr tool @ https://forum.hovatek.com/thread-21970.html or Miracle Box at https://forum.hovatek.com/thread-13347.html (if it supports your phone's chipset).

Once you've obtained your full scatter backup, you'll have two options for rooting
1. Patch boot using Magisk @ https://forum.hovatek.com/thread-21427.html then flash the patched boot using SP flash tool
2. Use our tool at https://forum.hovatek.com/thread-21495.html to port Philz recovery then flash it using SP flash tool

Important note
You can't use a Miracle Box scatter in Sp flash tool. Only the wwr scatter is Sp flash tool compatible so if you backup using Miracle Box, you must flash using Miracle Box

[Eslam El MasrY]

thes work y for my TECNO Cx Air build number Air
( CXAir-H3713A-N-180327V141)????

[hovatek]

thes work y for my TECNO Cx Air build number Air
( CXAir-H3713A-N-180327V141)????

Use Magisk @ https://forum.hovatek.com/thread-21427.html

[coldice]

Using ADB method for rooting on Infinix phones is really helpful cause flashing it through SP Tools will often fail in getting the img file mounted on the system. And your Philz for Tecno Camon CX Air ported by Team Hovatek really works like a charm for me. (infinix x571).

[xerxes]

Please help me i flashed the twrp above without unlocking bootloader and the recovery says "no command".Now i am using magisk but i want the twrp

[hovatek]

Please help me i flashed the twrp above without unlocking bootloader and the recovery says "no command".Now i am using magisk but i want the twrp

Please, create a new thread so we focus on it
see https://forum.hovatek.com/thread-514.html for how to create a thread

[xerxes]

i flashed boot.img using flashify and my phone is stucked at boot logo how to fix my bootloader is unlocked can i flash the entire stock rom via sp flash tool to solve this problem?

[xerxes]

i flashed boot.img using flashify and my phone is stucked at boot logo how to fix my bootloader is unlocked can i flash the entire stock rom via sp flash tool to solve this problem?

first, try flashing only stock boot.img (for your phone's build) using sp flash tool but if the problem persist then you'll need to flash the whole stock ROM. 
If you still require further assistance then please create a new thread @ https://forum.hovatek.com/forum-76.html so we focus on it.

[Kanyounus2911]

so everything worked until i wrote this cmd fastboot boot recovery.img

after this my mobile syas something like usb transfering...also on the cmd tab download complete or somethin like that is written,but after that my phone restarts and it doesnt boot into philz, on the starting screen there is written on left sidet hat your device is unprotected, boot in 5 seconds,

I really need help please Q_Q

[xerxes]

so everything worked until i wrote this cmd fastboot boot recovery.img

after this my mobile syas something like usb transfering...also on the cmd tab download complete or somethin like that is written,but after that my phone restarts and it doesnt boot into philz, on the starting screen there is written on left sidet hat your device is unprotected, boot in 5 seconds,

I really need help please Q_Q

Please create a new thread so we focus on it.
See https://forum.hovatek.com/thread-514.html for how to create a new thread.

Sent from my M5 mini using Hovatek Mobile