Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Development] How to root the Itel A51

#1

[Image: Hovatek-How-to-root-Itel-A51.jpg]

The Itel A51 (e.g A51-W505B-6.0-OP-V014-20170404) is an SC7731C powered phone running on Android 6.0 (Marshmallow)

How to root Itel A51
Code:
adb devices
adb reboot-bootloader
  • Once the phone is in fastboot, flash recovery.img using the command below
Code:
fastboot flash recovery recovery.img
  • Power off or reboot the phone then boot into recovery mode (see https://forum.hovatek.com/thread-2167.html )
  • In TWRP, if you get a prompt asking you to swipe to allow TWRP modify the system partition, tap KEEP READ ONLY
  • Tap Install
  • Navigate to the location of the SuperSU.zip and select it
  • Swipe to confirm flashing of SuperSU.zip and wait till flashing is complete
  • Reboot the phone normally



Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#2
twrp is not flashing it just shows fastboot on my phone and waiting for device on my system what do i do
Reply
#3
(08-13-2017, 06:16 PM)mangle Wrote: twrp is not flashing it just shows fastboot on my phone and waiting for device on my system what do i do

Refer to https://forum.hovatek.com/thread-17105.html
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#4
Please sir, i have set-up adb successfully, i have also install sciusb2serial successfully but when i connect my phone, it's trying to install the device software. From the taskbar it's showing, installing device driver software but at the end could not install, showing the device driver software not install successfully. What should I do, pls help.
Reply
#5
(08-20-2017, 08:10 AM)PatrickEdem Wrote: Please sir, i have set-up adb successfully, i have also install sciusb2serial successfully but when i connect my phone, it's trying to install the device software. From the taskbar it's showing, installing device driver software but at the end could not install, showing the device driver software not install successfully. What should I do, pls help.

Maybe it is because of the OS. I always get this trouble using 64bit OS Windows. Try it on 32bit Windows

Envoyé de mon itel S11 en utilisant Tapatalk

Reply
#6
(08-20-2017, 11:01 AM)TheGeekSaint Wrote:
(08-20-2017, 08:10 AM)PatrickEdem Wrote: Please sir, i have set-up adb successfully, i have also install sciusb2serial successfully but when i connect my phone, it's trying to install the device software. From the taskbar it's showing, installing device driver software but at the end could not install, showing the device driver software not install successfully. What should I do, pls help.

Maybe it is because of the OS. I always get this trouble using 64bit OS Windows. Try it on 32bit Windows

Envoyé de mon itel S11 en utilisant Tapatalk

Thanks, but i'm confused because i have used the same to system to flash a version of the stock rom on the device and it worked, Since then it having this problem
Reply
#7
(08-20-2017, 08:10 AM)PatrickEdem Wrote: Please sir, i have set-up adb successfully, i have also install sciusb2serial successfully but when i connect my phone, it's trying to install the device software. From the taskbar it's showing, installing device driver software but at the end could not install, showing the device driver software not install successfully. What should I do, pls help.

the guide doesnt require sciusb2serial driver, only adb drivers
sciusb2serial is required if you intend to flash using research download etc
did you get stuck along the way in the rooting guide? if yes, then where exactly?
Reply
#8
(08-21-2017, 11:31 AM)X3non Wrote:
(08-20-2017, 08:10 AM)PatrickEdem Wrote: Please sir, i have set-up adb successfully, i have also install sciusb2serial successfully but when i connect my phone, it's trying to install the device software. From the taskbar it's showing, installing device driver software but at the end could not install, showing the device driver software not install successfully. What should I do, pls help.

the guide doesnt require sciusb2serial driver, only adb drivers
sciusb2serial is required if you intend to flash using research download etc
did you get stuck along the way in the rooting guide? if yes, then where exactly?

Setup ADB-Fastboot on your PC to detect your Spreadtrum phone, this is where i'm stuck, pls help
Reply
#9
(This post was last modified: 08-21-2017, 04:34 PM by X3non. )
(08-21-2017, 04:10 PM)PatrickEdem Wrote: Setup ADB-Fastboot on your PC to detect your Spreadtrum phone, this is where i'm stuck, pls help

i'll take it that you've successfully installed adb but adb still isnt detecting your device when you type "adb devices"
* ensure that usb debugging has been enabled on your device, also check the device screen to access any request
if it still doesnt detect, then try the fix @ https://forum.hovatek.com/thread-17105.html
Reply
#10
Yes, i have installed the abd successfully, but installing sciu25 Android usb spreadtrum drivers and sci Android usb driver jungo 4 is where i'm having problem
Reply










Users browsing this thread:
1 Guest(s)