Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

How to root tecno w3

#1
(This post was last modified: 08-05-2017, 01:54 PM by Gentle_soul. )

Please I followed all the due process to root my tecno w3 but at the end while pressing volume up key with power it just shows me white screen with some tiny blue colour please help me on what to do next.. I will appreciate it if you reply me ASAP

Sent from my TECNO-W3 using Hovatek mobile


Reply
#2
(08-05-2017, 01:38 PM)Gentle_soul Wrote: Please I followed all the due process to root my tecno w3 but at the end while pressing volume up key with power it just shows me white screen with some tiny blue colour please help me on what to do next.. I will appreciate it if you reply me ASAP

Sent from my TECNO-W3 using Hovatek mobile

1. What's your phone's Build Number?
2. Did you flash anything else aside from recovery.img?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#3
(08-05-2017, 10:57 PM)hovatek Wrote:
(08-05-2017, 01:38 PM)Gentle_soul Wrote: Please I followed all the due process to root my tecno w3 but at the end while pressing volume up key with power it just shows me white screen with some tiny blue colour please help me on what to do next.. I will appreciate it if you reply me ASAP

Sent from my TECNO-W3 using Hovatek mobile

1. What's your phone's Build Number?
2. Did you flash anything else aside from recovery.img?

1. My phone build number is .. Tecno w3/MRA58K/W3-H806A1-M-170222V112.
2. I only flash the scattered file with the recovery with sp flash tool.


Sent from my TECNO-W3 using Hovatek mobile
Reply
#4
1. My phone build number is .. Tecno w3/MRA58K/W3-H806A1-M-170222V112.
2. I only flash the scattered file with the recovery with sp flash tool.


Sent from my TECNO-W3 using Hovatek mobile
Reply
#5
(08-06-2017, 06:51 PM)Gentle_soul Wrote: 1. My phone build number is .. Tecno w3/MRA58K/W3-H806A1-M-170222V112.
2. I only flash the scattered file with the recovery with sp flash tool.


Sent from my TECNO-W3 using Hovatek mobile

Is the phone currently bricked or can still boot to home screen?
If its bricked then download the firmware for your Build @ https://forum.hovatek.com/thread-19340.html and flash using SP Flash tool @ https://forum.hovatek.com/thread-159.html

Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#6
Nope it is not bricked... I can still go to home menu and do task on it

Sent from my TECNO-W3 using Hovatek mobile
Reply
#7
(This post was last modified: 08-10-2017, 06:43 AM by hovatek. )
(08-09-2017, 10:43 AM)Gentle_soul Wrote: Nope it is not bricked... I can still go to home menu and do task on it

Sent from my TECNO-W3 using Hovatek mobile

We already ported TWRP for your build. quite strange you're experiencing this issue
Did you dump / backup your firmware before flashing the recovery? Or do you have a firmware for your Build?
If not, dump your firmware in scatter format using Miracle Box @ https://forum.hovatek.com/thread-13347.html
After dumping
Flash the stock recovery.img uploaded by the OP @ https://forum.hovatek.com/thread-18448.html and let me know if your phone is able to boot into stock recovery again
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#8
1. Please, should I tick save scatter file ? then save it on my PC then flash the recovery you gave me in it
2. Instead of my phone to connect with the miracle tool it's just charging and I have installed the vrom driver but it keeps charging Pls what should I do?


Sent from my TECNO-W3 using Hovatek mobile
Reply
#9
(08-11-2017, 04:32 AM)Gentle_soul Wrote: 1. Please, should I tick save scatter file ? then save it on my PC then flash the recovery you gave me in it
2. Instead of my phone to connect with the miracle tool it's just charging and I have installed the vrom driver but it keeps charging Pls what should I do?


Sent from my TECNO-W3 using Hovatek mobile

1. Tick save scatter file (in Miracle Box) but you flash the recovery I gave you using SP Flash tool
2. Update your VCOM drivers using https://forum.hovatek.com/thread-16839.html
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)