panasonic t30 BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail

[chaveen]

i hv a panasonic t30 phone. wen i was using it is suddenly got stuck n switced off n didnt boot since then. it didnt charge even bt the battery is working fine. so i downaloed he orgnial firmware n tried to flash bt it was gving me the error BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail contiuously. i tired reinstalling the drivers, using the latest sp flash tool bt nvr worked
plz help me

[chaveen]

does it mean that the firmware files or the preloader are not comptible with the device? bt there was only one firmware to be available in every site which is ''Panasonic_T30_EB-90S40T30v1011_MT6580''
kindly help me to this matter.
expecting a favorable reply

[hovatek]

i hv a panasonic t30 phone. wen i was using it is suddenly got stuck n switced off n didnt boot since then. it didnt charge even bt the battery is working fine. so i downaloed he orgnial firmware n tried to flash bt it was gving me the error BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail contiuously. i tired reinstalling the drivers, using the latest sp flash tool bt nvr worked
plz help me

That's a mismatch error, refer to https://forum.hovatek.com/thread-439.html
Can I see a full screenshot of the error message and hope you're not pressing any button when connecting to PC for flashing

[chaveen]

i hv a panasonic t30 phone. wen i was using it is suddenly got stuck n switced off n didnt boot since then. it didnt charge even bt the battery is working fine. so i downaloed he orgnial firmware n tried to flash bt it was gving me the error BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail contiuously. i tired reinstalling the drivers, using the latest sp flash tool bt nvr worked
plz help me

That's a mismatch error
Can I see a full screenshot of the error message and hope you're not pressing any button when connecting to PC for flashing

here sir but if its a mismatch error how can i find the proper firmware as i only found this firmware available in every site.

[innagee]

i hv a panasonic t30 phone. wen i was using it is suddenly got stuck n switced off n didnt boot since then. it didnt charge even bt the battery is working fine. so i downaloed he orgnial firmware n tried to flash bt it was gving me the error BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail contiuously. i tired reinstalling the drivers, using the latest sp flash tool bt nvr worked
plz help me

That's a mismatch error
Can I see a full screenshot of the error message and hope you're not pressing any button when connecting to PC for flashing

here sir but if its a mismatch error how can i find the proper firmware as i only found this firmware available in every site.

Do you have access with a working device of the same model?

[hovatek]

here sir but if its a mismatch error how can i find the proper firmware as i only found this firmware available in every site.

So far you're not pressing any button when connecting to PC for flashing, this error means the firmware isn't for your variant. Either that or your phone's storage chip is corrupted

[chaveen]

here sir but if its a mismatch error how can i find the proper firmware as i only found this firmware available in every site.

So far you're not pressing any button when connecting to PC for flashing, this error means the firmware isn't for your variant. Either that or your phone's storage chip is corrupted

ohhhh   anyway thnxs sir for the ideas n help . As sir mentioned it might b a problem with the storage chip so the only way is to gv the phone to a service center so dat they might repair n gv

[chaveen]

i hv a panasonic t30 phone. wen i was using it is suddenly got stuck n switced off n didnt boot since then. it didnt charge even bt the battery is working fine. so i downaloed he orgnial firmware n tried to flash bt it was gving me the error BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail contiuously. i tired reinstalling the drivers, using the latest sp flash tool bt nvr worked
plz help me

That's a mismatch error
Can I see a full screenshot of the error message and hope you're not pressing any button when connecting to PC for flashing

here sir but if its a mismatch error how can i find the proper firmware as i only found this firmware available in every site.

Do you have access with a working device of the same model?

no sir