BROM Error (DA Faild) Huawei G750-U10
BROM Error (DA Faild) Huawei G750-U10
(29-08-2017, 09:52 PM)Bantu Bruh Did you install the required vcom drivers and correctly
Sent from my Phantom6-Plus using Hovatek Forum
(29-08-2017, 10:24 PM)Amin2 yeah sure even if not install correct on PC1 its install correctly on PC2
and as you see in screenshot if V COM Drivers not installed correctly then device shouldn't recognize by PC
(30-08-2017, 10:54 AM)hovatek(29-08-2017, 10:24 PM)Amin2 yeah sure even if not install correct on PC1 its install correctly on PC2
and as you see in screenshot if V COM Drivers not installed correctly then device shouldn't recognize by PC
There's a problem reading or writing to that secro partition.
Attach the scatter file here for me to see
(30-08-2017, 11:32 AM)Amin2 ok thanks for your time
i attached file here as a zip file
partition_index: SYS11
partition_name: SEC_RO
file_name: secro.img
is_download: true
type: EXT4_IMG
linear_start_addr: 0x37a0000
physical_start_addr: 0x37a0000
partition_size: 0x600000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: UPDATE
reserve: 0x00
(30-08-2017, 07:20 PM)hovatek(30-08-2017, 11:32 AM)Amin2 ok thanks for your time
i attached file here as a zip file
I thought as much (refer to this error @ https://www.hovatek.com/forum/thread-439.html ).
Here's an excerpt from your scatter file
Code:partition_index: SYS11
partition_name: SEC_RO
file_name: secro.img
is_download: true
type: EXT4_IMG
linear_start_addr: 0x37a0000
physical_start_addr: 0x37a0000
partition_size: 0x600000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: UPDATE
reserve: 0x00
It expects a file named secro.img but you've loaded a file named secro-sign.img
rename the file to secro.img
(30-08-2017, 07:20 PM)hovatek(30-08-2017, 11:32 AM)Amin2 ok thanks for your time
i attached file here as a zip file
I thought as much (refer to this error @ https://www.hovatek.com/forum/thread-439.html ).
Here's an excerpt from your scatter file
Code:partition_index: SYS11
partition_name: SEC_RO
file_name: secro.img
is_download: true
type: EXT4_IMG
linear_start_addr: 0x37a0000
physical_start_addr: 0x37a0000
partition_size: 0x600000
region: EMMC_USER
storage: HW_STORAGE_EMMC
boundary_check: true
is_reserved: false
operation_type: UPDATE
reserve: 0x00
It expects a file named secro.img but you've loaded a file named secro-sign.img
rename the file to secro.img
(30-08-2017, 09:03 PM)Amin2 not working
i think its becoz of hardware na ?
i think hard or motherboard or maybe USB port of the phone had the problem with voltage or something i need to take it to customer service
whats your idea ?
(31-08-2017, 11:00 AM)hovatek(30-08-2017, 09:03 PM)Amin2 not working
i think its becoz of hardware na ?
i think hard or motherboard or maybe USB port of the phone had the problem with voltage or something i need to take it to customer service
whats your idea ?
Quite possible, but why do you have only secro and scatter file and not a complete stock rom?