Hi, Guest! Login / Register

We're Recruiting: Applicants must possess hardware repair skills. Email [email protected] (Jan, 2018)
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] Tecno d5 only vibrates

#1

Hello, thanks for your past support.. I was trying to flash tecno d5 because of password privacy. And after flashing and downloading with sp flash tool.. I received flashing was successful message, but pressing the power button, it only vibrates with no sign of life in it, it doesn't display anything, even it vibrates also playing it to charger... System doesn't recognise it any longer, it only vibrates when plug to the computer. Pls I will appreciate your appropriate support, but I'm confused on this phone and it is a costumer phone. Pls help...! Thanks... I have removed MTK vcom drivers and reinstalled.. But still the same thing.
Reply
#2
(This post was last modified: 09-09-2017, 08:22 AM by maxxxiii. )
(09-08-2017, 06:36 PM)Unique_Bayus Wrote: Hello,  thanks for your past support.. I was trying to flash tecno d5 because of password privacy. And after flashing and downloading with sp flash tool..  I received flashing was successful message, but pressing the power button,  it only vibrates with no sign of life in it, it doesn't display anything,  even it vibrates also playing it to charger...  System doesn't recognise it any longer,  it only vibrates when plug to the computer.  Pls I will appreciate your appropriate support,  but I'm confused on this phone and it is a costumer phone.  Pls help...!  Thanks... I have removed MTK vcom drivers and reinstalled..  But still the same thing.

You have to revive by joining gold points as explained in https://forum.hovatek.com/thread-11802.html

Sent from my Infinix X510 using Hovatek Forum
Reply
#3
Try to hard reset, or make sure the firmware you use is corresponds to your model

Sent from my TECNO H6 using Hovatek Forum
Reply
#4
(09-09-2017, 08:22 AM)maxxxiii Wrote:
(09-08-2017, 06:36 PM)Unique_Bayus Wrote: Hello,  thanks for your past support.. I was trying to flash tecno d5 because of password privacy. And after flashing and downloading with sp flash tool..  I received flashing was successful message, but pressing the power button,  it only vibrates with no sign of life in it, it doesn't display anything,  even it vibrates also playing it to charger...  System doesn't recognise it any longer,  it only vibrates when plug to the computer.  Pls I will appreciate your appropriate support,  but I'm confused on this phone and it is a costumer phone.  Pls help...!  Thanks... I have removed MTK vcom drivers and reinstalled..  But still the same thing.

You have to revive by joining gold points as explained in https://forum.hovatek.com/thread-11802.html

Sent from my Infinix X510 using Hovatek Forum




After I joined the gold points, the system now recognizes it, but when I used format menu, it got formated successfully but each time I try doenloding it back....it gets disconnect and the system says .... Device not recognized.. Pls what else can I do in this case? Thanks for your effort ,!!
Reply
#5


(11-01-2017, 12:22 AM)Unique_Bayus Wrote: After I joined the gold points, the system now recognizes it, but when I used format menu, it got formated successfully  but each time I try doenloding it back....it gets disconnect and the system says .... Device not recognized.. Pls what else can I do in this case? Thanks for your effort ,!!

Flash one file at a time


Sent from my Infinix X510 using Hovatek Forum
Reply









Users browsing this thread:
1 Guest(s)