[Please help] Infinix zero 3 does not boot again after rebooting by itself several times
[Please help] Infinix zero 3 does not boot again after rebooting by itself several times
(18-09-2017, 04:33 PM)femlas25 Hello team hovatek, my infinix zero 3 x552 does not switch on again. I've tried to used flash tool to download the another rom on it. But anytime I connect the usb to the computer I hear a sound that's it's connected then later on another sound will come up,that's it's disconnected I've tried everything. Download new drivers. Download new sp flash tool but the flashing process is always interrupted by the usb disconnection. I've tried another laptop and usb cable. But the flashing could not be done. As at now the phone does not even come up. Even after charging it for long. Before it stops coming up, it usually switch on by itself show infinix logo and then restart by itself then later on switch on again and off till infinity. Then after I tried flashing it, after awhile it doesn't even turn on again. And it just keeps bringing different error from flash tool. But I think the main problem is from the automatic frequent disconnection from the laptop. I've attached the errors I encountered with this email. Please help me out. God will continue to bless your organization.
(19-09-2017, 03:00 PM)femlas25 Thanks so much team Hovatek for this tutorial . I'll try everything you've said. I just want to ask in case I tried everything you advised, and I'm still encountering error. How am I supposed to fix emmc chip? I will be glad if you can give me an idea. Thanks. I really appreciate.
Sent from my BL5000 using Hovatek Forum
(19-09-2017, 06:20 PM)hovatek(19-09-2017, 03:00 PM)femlas25 Thanks so much team Hovatek for this tutorial . I'll try everything you've said. I just want to ask in case I tried everything you advised, and I'm still encountering error. How am I supposed to fix emmc chip? I will be glad if you can give me an idea. Thanks. I really appreciate.
Sent from my BL5000 using Hovatek Forum
That's a hardware component on the board and would need to be replaced
(20-09-2017, 04:58 PM)femlas25 I think the problem is a connection issue. I was told to replace the emmc chip, if the flashing is not successful. But I can't even connect let alone flashing the phone. From the screen shot I posted it's a connection issue. That's why I'm guessing maybe the phone Port has problem establishing data connection. Because it disconnect like after three seconds of connecting. So I'm guessing it's the Port. And also I believe changing the emmc chip will be costly, and I don't have much . so what can I do to establish a stable connection I've tried different ports , USB cable and laptop. Can it be the phone Port? Also where can I get a good engineer that can fix emmc chip?
Sent from my BL5000 using Hovatek Forum