Hovatek Forum DOWNLOADS Android Firmware Itel [Downloads] Itel it1409 Stock ROM | Firmware | PAC file
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Downloads] Itel it1409 Stock ROM | Firmware | PAC file

[Downloads] Itel it1409 Stock ROM | Firmware | PAC file

Pages (2): 1 2 Next
hovatek
hovatek
hovatek
Administrator
49,570
22-09-2017, 11:19 AM
#1



Below is a collection of download links to flash files, firmware, stock roms or pac files for Itel it1409. If you wish to unpack or exract the contents of the pac file then follow the guide @ https://www.hovatek.com/forum/thread-6236.html

Download Itel it1409 stock rom / firmware / pac file below



How to flash / unbrick an Itel it1409


The firmware above is in .pac format (after you extract from zip, rar or 7z file) so this means you can flash with Research Download or Upgrade Download tool, Infinity Chinese Miracle II SPD Box, Miracle Box or any other Chinese box or tool which supports flashing in PAC format.
Before flashing, ensure that:
  1. The battery is charged to an extent and inserted into the phone
  2. The phone is powered off / switched off
  3. You have installed Spreadtrum SCI USB drivers
  4. You have downloaded the firmware above and copied the .pac file into a folder (ensure to unzip if the pac file is in a zip, rar or 7z file)
  5. You have a PC and USB cord

Itel IT1409 Core Specifications

  • Model: IT1409
  • Network type: 3G
  • OS Version: Android 5.1
  • Body Dimensions: 125 x 64.5 x 10.8mm
  • Display Size: 10.16cm(4)
  • Screen Resolution: 480x800 pixels
  • Chipset: Spreadtrum
  • Resolution Type: WVGA
  • Pixel density: 233 ppi
  • Technology: G+F, TN
  • SENSOR: G sensor, Proximity sensor
  • Primary Camera: 2.0MP
  • Primary camera Flash: YES
  • Secondary camera: 0.3MP
  • Processor: Quad core, 1.2 GHz
  • Graphic processor: Mali 400
  • RAM: 512MB
  • ROM: 8GB
  • Storage expansion: microSD upto 32GB
  • SIM cards: 2 slots(Dual standby)
  • SIM slot type/size: Both standard
  • Earphone Jack: 3.5mm
  • Battery Capacity: 1500mAh, Li-ion
  • GSM: 900/1800 MHz
  • EDGE: DL only
  • WCDMA: 900/2100 MHz
  • WiFi: 802.11b/g/n
  • Bluetooth: BT 2.1
  • GPS/AGPS: AGPS
This post was last modified: 05-10-2018, 02:20 AM by X3non.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Superbnerd
Superbnerd
Superbnerd
Junior Member
36
22-09-2017, 03:31 PM
#2
Can you drop tecno wx3p stock ROM,in a flashable zip?
xerxes
xerxes
xerxes
Senior Member
8,355
22-09-2017, 04:10 PM
#3
(22-09-2017, 03:31 PM)Superbnerd Can you drop tecno wx3p stock ROM,in a flashable zip?

Please create a new thread, so we focus on it.
See https://www.hovatek.com/forum/thread-514.html for how to create.
allymchonjo
allymchonjo
allymchonjo
Newbie
1
26-08-2018, 01:13 PM
#4
(22-09-2017, 11:19 AM)hovatek ...

After flash the rom from the last link, touch not working. How to solve it
This post was last modified: 27-08-2018, 12:50 PM by hovatek.
xerxes
xerxes
xerxes
Senior Member
8,355
26-08-2018, 09:25 PM
#5



(26-08-2018, 01:13 PM)allymchonjo ...

have you tried resetting the phone in recovery mode?  see https://www.hovatek.com/forum/thread-479.html
did you take note of the phone's build no. before flashing it?
This post was last modified: 27-08-2018, 12:50 PM by hovatek.
maxpayne
maxpayne
maxpayne
Contributor
2,873
27-08-2018, 12:51 PM
#6
(26-08-2018, 01:13 PM)allymchonjo After flash the rom from the last link, touch not working. How to solve it

Flash a different firmware

Sent from my Infinix X510 using Hovatek Mobile
5diamond
5diamond
5diamond
Techie Member
68
06-11-2018, 09:28 AM
#7
After flash Itel it1409 with the file with build number it1409-w406A-6.0-OP-V022-20170824 its went successfully and phone is back from dead mode but now having Unknown Baseband issue
X3non
X3non
X3non
Recognized Contributor
22,062
06-11-2018, 10:49 AM
#8
(06-11-2018, 09:28 AM)5diamond After flash Itel it1409 with the file with build number it1409-w406A-6.0-OP-V022-20170824 its went successfully and phone is back from dead mode but now having Unknown Baseband issue

try factory resetting the phone then check the baseband
try a different firmware build
ematex419
ematex419
ematex419
Newbie
3
21-03-2019, 10:43 AM
#9
After  flashing with dis itel1409 file no service on my phone but imei nd baseband are okey... Solution plz......
X3non
X3non
X3non
Recognized Contributor
22,062
21-03-2019, 03:00 PM
#10



(21-03-2019, 10:43 AM)ematex419 After  flashing with dis itel1409 file no service on my phone but imei nd baseband are okey... Solution plz......

create a new thread for your device issue so we'll focus on it
see https://www.hovatek.com/forum/thread-514.html for how to create a thread
Pages (2): 1 2 Next
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram