Is your Baseband showing anything? from setting > about phone
It shouldn't then if your y6 is rooted, follow these steps;
Download and Install Mobile Uncle (Now Tool Hero) then grant it superSu permission
* Select Engineer mode
* Select Engineer mode (MTK)
* Navigate to the Connectivity tab
* Select CDS information
* Select Radio Information
* At Phone 1: Insert the command below then click Send at command
AT+EGMR=1,7,"type your imei 1 here"
* At Phone 2: Insert the command below then click Send at command
AT+EGMR=1,10,"type your imei 2 here"
* If you get an error like "This command is not allowed in user build" then leave a space between AT+ and EGMR as show below
AT+ EGMR="your imei 1"
!do the same for imei 2!
* Go back to Mobile uncle home screen
* Click on Engineer Mode
* Select Engineer mode (Android)
* Select Phone information
* Click Turn on radio
Then restart your phone
This post was last modified: 13-10-2017, 07:55 AM by Roberto.