[Please help] Custom recovery for Innjoo Halo 3

[hovatek]

Done. I took a screenshot of everything, maybe it'll be of use to someone else.

MT6737.
There are just 2 such scatter files @ https://forum.hovatek.com/thread-12724.html , MT6737M and MT6737T.
You've tried both I believe?

[ThePunisher]

Done. I took a screenshot of everything, maybe it'll be of use to someone else.

MT6737.
There are just 2 such scatter files @ https://forum.hovatek.com/thread-12724.html , MT6737M and MT6737T.
You've tried both I believe?

Yes, I have. Obtain DRAM failed on both. But according to the phone the right one is the M version.

[hovatek]

Yes, I have. Obtain DRAM failed on both. But according to the phone the right one is the M version.

Hmm
Taking a closer look at your reply @ https://forum.hovatek.com/thread-21083-p...#pid124072 , I see you used V2.61 . Do you have the hardware box / dongle? If not then you should be using the Loader version (2.27A) and the guide @ https://forum.hovatek.com/thread-13347.html

[ThePunisher]

Done. I took a screenshot of everything, maybe it'll be of use to someone else.

MT6737.
There are just 2 such scatter files @ https://forum.hovatek.com/thread-12724.html , MT6737M and MT6737T.
You've tried both I believe?

Yes, I have. Obtain DRAM failed on both. But according to the phone the right one is the M version.

For some reason that shows up in the log, but as you can see in the screenshots I'm using 2.27A + Loader. I had no trouble using Miracle Box to read my Wiko Pulp (as a test, to see if Miracle Box was working.)

Maybe it's because I changed "dates227" to 2018, to make the "Start" button work.

[hovatek]

For some reason that shows up in the log, but as you can see in the screenshots I'm using 2.27A + Loader. I had no trouble using Miracle Box to read my Wiko Pulp (as a test, to see if Miracle Box was working.)

Maybe it's because I changed "dates227" to 2018, to make the "Start" button work.

Guess we either need to find a MT6737 scatter that works with this model or get the firmware. I'm pretty sure a box would've backed up this firmware without issues

[ThePunisher]

For some reason that shows up in the log, but as you can see in the screenshots I'm using 2.27A + Loader. I had no trouble using Miracle Box to read my Wiko Pulp (as a test, to see if Miracle Box was working.)

Maybe it's because I changed "dates227" to 2018, to make the "Start" button work.

Guess we either need to find a MT6737 scatter that works with this model or get the firmware. I'm pretty sure a box would've backed up this firmware without issues

I can't explain how much I regret this purchase.

A word of advice to anyone out there, InnJoo is terrible. The phone itself is okay, but it comes with their own system installed launcher (which is a damned dataminer, incredibly basic but somehow takes up 100+ MB of RAM), packed with UC Browser and Truecaller, two apps also known to be dataminers.

On top of that, customer support is non-existent. There's an email on the website that will not answer you (not even with an automated message), and a forum that's 90% populated by spam-bots. That's it.

I really should have chosen another Wiko. I regret buying an InnJoo and I advise you to not purchase one.

That being said, I guess I'm stuck with it now. So I'm going to try and get some scatter files for this chip and keep pressing with SP Flash.

In the meanwhile I'll go check out the cost of a Miracle Box as well.

Thank you for not abandoning this issue.