Bluboo S1 Baseband (MT6757P) unknown
Bluboo S1 Baseband (MT6757P) unknown
(29-11-2017, 11:32 AM)ManiacB Hi. Now i have the chance to get a working Phone.
How can I extract the files i need? With a backup via recovery?
Gesendet von meinem D6503 mit Tapatalk
(01-12-2017, 06:39 AM)ManiacB Hi. I'm a little bit confused. Does it mean i don't need a working phone? The factory firmware is enough?
Gesendet von meinem D6503 mit Tapatalk
(12-12-2017, 07:05 PM)ManiacB Hi!
I´m going crazy...
Now i have two Bluboo S1.One is completely ok the other still broken.
I can´t connect the good phone to Miracle box.
Connection to SP Flashtool and also adb works without problems.
I have tried different drivers, switch of the Virus protection but no success.
Is it helpful to create a complete readback with SP Flashtool?
(13-12-2017, 12:46 PM)hovatek(12-12-2017, 07:05 PM)ManiacB Hi!
I´m going crazy...
Now i have two Bluboo S1.One is completely ok the other still broken.
I can´t connect the good phone to Miracle box.
Connection to SP Flashtool and also adb works without problems.
I have tried different drivers, switch of the Virus protection but no success.
Is it helpful to create a complete readback with SP Flashtool?
There's nothing to be confused about here.
Now, you have 1 working phone, 1 broken phone (Baseband) and a firmware for your model right?
Now, this is what I'm asking you to do
Zip and upload the scatter file and recovery.img from the firmware with you so we can use it to port TWRP.
You'll flash the TWRP to both phones then backup Secro & NVRAM of the working phone and restore to the broken phone (in TWRP).
I hope this is clear
(16-12-2017, 07:25 PM)ManiacB(13-12-2017, 12:46 PM)hovatek(12-12-2017, 07:05 PM)ManiacB Hi!
I´m going crazy...
Now i have two Bluboo S1.One is completely ok the other still broken.
I can´t connect the good phone to Miracle box.
Connection to SP Flashtool and also adb works without problems.
I have tried different drivers, switch of the Virus protection but no success.
Is it helpful to create a complete readback with SP Flashtool?
There's nothing to be confused about here.
Now, you have 1 working phone, 1 broken phone (Baseband) and a firmware for your model right?
Now, this is what I'm asking you to do
Zip and upload the scatter file and recovery.img from the firmware with you so we can use it to port TWRP.
You'll flash the TWRP to both phones then backup Secro & NVRAM of the working phone and restore to the broken phone (in TWRP).
I hope this is clear
Ok, thank you.
So here is a link to the zip.
https://www.dropbox.com/s/ygdvuhzltc2goo...1.zip?dl=0
(18-12-2017, 01:11 PM)innagee(16-12-2017, 07:25 PM)ManiacB(13-12-2017, 12:46 PM)hovatek(12-12-2017, 07:05 PM)ManiacB Hi!
I´m going crazy...
Now i have two Bluboo S1.One is completely ok the other still broken.
I can´t connect the good phone to Miracle box.
Connection to SP Flashtool and also adb works without problems.
I have tried different drivers, switch of the Virus protection but no success.
Is it helpful to create a complete readback with SP Flashtool?
There's nothing to be confused about here.
Now, you have 1 working phone, 1 broken phone (Baseband) and a firmware for your model right?
Now, this is what I'm asking you to do
Zip and upload the scatter file and recovery.img from the firmware with you so we can use it to port TWRP.
You'll flash the TWRP to both phones then backup Secro & NVRAM of the working phone and restore to the broken phone (in TWRP).
I hope this is clear
Ok, thank you.
So here is a link to the zip.
https://www.dropbox.com/s/ygdvuhzltc2goo...1.zip?dl=0
Here's TWRP @ https://mega.nz/#!VWwywaLB!g6wXhrAZ_sIAr...LD70N3qeP8
Flash the TWRP on the working phone using SP flash tool, then backup Secro and NVRAM in TWRP
(18-12-2017, 07:20 PM)ManiacB I flashed the twrp successfully and try to backup nvram and secro. But there is no Partition with name secro.Nvram is no problem...
Has the secro partition another name?