Hovatek Forum DEVELOPMENT Android Status 0 error in cwn recovery.
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


Status 0 error in cwn recovery.

Status 0 error in cwn recovery.

Afiz2010
Afiz2010
Afiz2010
Junior Member
31
27-03-2015, 03:33 AM
#1



I av been able to build an update.zip from my stock rom using android kitchen. Rom was created sucessfully. i checked for error there was no issue found. If i try to flash using cwm recovery. I av the error status 0 error. pls hw can i configure my kitchen to create a working update.zip dat wil not give me dis error?

Sent from my HTC One X using Hovatek mobile
hovatek
hovatek
hovatek
Administrator
49,570
27-03-2015, 09:29 AM
#2
(27-03-2015, 03:33 AM)Afiz2010 I av been able to build an update.zip from my stock rom using android kitchen. Rom was created sucessfully. i checked for error there was no issue found. If i try to flash using cwm recovery. I av the error status 0 error. pls hw can i configure my kitchen to create a working update.zip dat wil not give me dis error?

Sent from my HTC One X using Hovatek mobile

Status 0 might be two things: 1) You used an update-script (Amend format, which is very old) when you should be using an updater-script (Edify format), or the other way around; OR 2) Your updater-script is using the "MTD" partition type when mounting a partition rather than another type such as EMMC (and thus, you need the device defined under the kitchen's /tools/edify_defs folder).

Status 6 might be two things: 1) You edited your updater-script with a non-Unix-compatible text editor. Don't use Notepad or MS-Word!! You must use something like gVim or Notepad++. OR, 2) There is a syntax error in your updater-script.

Status 7 means your mount points in the updater-script are wrong and/or your update-binary is not the correct type and doesn't support the syntax used for the mount points. Also, ensure your boot.img is using the correct instruction in the updater-script for flashing it.
This post was last modified: 27-03-2015, 09:32 AM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Afiz2010
Afiz2010
Afiz2010
Junior Member
31
29-03-2015, 03:02 AM
#3
Thanks 4 ur reply. Pls hw can i define my device under the kitchen's /tools/edify_defs folder). I checked there nd see other devices.

Sent from my HTC One X using Hovatek mobile
Afiz2010
Afiz2010
Afiz2010
Junior Member
31
29-03-2015, 03:03 AM
#4
My device is tecno h6. Thanks.

Sent from my HTC One X using Hovatek mobile
hovatek
hovatek
hovatek
Administrator
49,570
29-03-2015, 10:08 AM
#5



(29-03-2015, 03:02 AM)Afiz2010 Thanks 4 ur reply. Pls hw can i define my device under the kitchen's /tools/edify_defs folder). I checked there nd see other devices.

Sent from my HTC One X using Hovatek mobile

unpack the recovery.img in Android kitchen. Go to the rmdisk/etc folder and open the recovery.fstab. also, go to the build.prop of the Tecno H6 ROM
let me know when you have both open in Notepad++

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
olang
olang
olang
Techie Member
68
30-03-2015, 06:56 AM
#6
open commands in your pc and type { adb shell cat /proc/dumchar_info } only within the bracket to get ur phone blocks. then use this file. https://www.4shared.com/file/8PO5C5mfce/TECNO_M3.html to cross check as per your phone, then push the file to edify_defs folder in android kitchen to prepare your updater script.
This post was last modified: 30-03-2015, 06:58 AM by olang.
Afiz2010
Afiz2010
Afiz2010
Junior Member
31
03-04-2015, 09:04 PM
#7
I was able to get the recovery.fstab and built.prob. now i av been able to fix it after reading a post on how to use them. thanks guys for ur replies. Big Grin
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram