I NEED STOCK FIRMWARE FOR COOLPAD 8298_M02
I NEED STOCK FIRMWARE FOR COOLPAD 8298_M02
(19-12-2017, 10:48 PM)eaz Somebody said it's not booting because of wrong PreLoader what do you think?... Because when I connect to charger phone shows Red light for like 10mins and go off and still not responding for about 15mins sọ I removed from light scared not to spoil the battery
Sent from my htc_desire_626g using Tapatalk
(20-12-2017, 03:58 PM)eaz I. Made an attempt.. I try rẹ flashing it and the same error of before S_BROM_CMD_JUMP_DA_FAIL has start again.. The Red Graph passed 100% but gave error S_BROM_CMD_JUMP_DA_FAIL ... My Question is is there any effect to the already successful flash to the Rom?... Am asking so to know if I should connect it to light a d just 4get it for some hours.... THANKS
Sent from my htc_desire_626g using Tapatalk
(20-12-2017, 05:42 PM)X3nonNote 3 and Note 3 lite are 8298-100 and dey are 3Gb Ram(20-12-2017, 03:58 PM)eaz I. Made an attempt.. I try rẹ flashing it and the same error of before S_BROM_CMD_JUMP_DA_FAIL has start again.. The Red Graph passed 100% but gave error S_BROM_CMD_JUMP_DA_FAIL ... My Question is is there any effect to the already successful flash to the Rom?... Am asking so to know if I should connect it to light a d just 4get it for some hours.... THANKS
Sent from my htc_desire_626g using Tapatalk
there's no need of trying to re-flash the rom again. disconnect / reconnect the battery of the device and if it still remains totally dead then its likely incompatible rom [preloader] . you'll need to search for and download another rom from a different source
you can check if these roms match your device model,
http://www.mediafire.com/file/f132wjk3g2...98_I00.zip
and
https://ia800402.us.archive.org/31/items...220416.zip
(20-12-2017, 07:52 PM)eaz Note 3 and Note 3 lite are 8298-100 and dey are 3Gb Ram
Mine before it gets to this stage on the phone case it's written
Coolpad 8298-A01 which spec is 2Gb Ram and 8gb Rom
The Os on it shows
Coolpad 8298-M02 when I use phone info app to check
Now when I open the phone on the Finger Flex it is labeled
8298-A01
So when it got bricked I try restoring the backup I made with Miracle failed saying bad boot or cpu
The í gó download 8298-A01 firmware and that's when I start get
S_BROM_CMD_JUMP_DA_FAIL when I got tired I dropped the phone for 2days then I have to format my Pc to correct blue screen report issue
So when I try to reflash it was successful so am just confused
When phone shows 8298-M02 and case show 8298-A01 I also checked Imei and it says 8298-A01
Sent from my htc_desire_626g using Tapatalk
(22-12-2017, 10:35 AM)eaz Am just to weak now I reformat my laptop thinking this error S_BROM_CMD_JUMP_DA_FAIL will stop but failed I try using the Desktop in the sitting room but still same error I guess this connection error is from the phone not pc nore cable I have used all my Kodak Cords and use others too still error remains
Sent from my htc_desire_626g using Tapatalk
(22-12-2017, 02:04 PM)X3nonI have downloaded 8298-A01 and the Note 3 lite too the Note 3 lite has everything my phone have making am having 3 Roms now 8298-M02 8298-A01 and 8298-100(22-12-2017, 10:35 AM)eaz Am just to weak now I reformat my laptop thinking this error S_BROM_CMD_JUMP_DA_FAIL will stop but failed I try using the Desktop in the sitting room but still same error I guess this connection error is from the phone not pc nore cable I have used all my Kodak Cords and use others too still error remains
Sent from my htc_desire_626g using Tapatalk
have you gotten a different firmware or you are still using the old firmware?
(23-12-2017, 10:53 AM)eaz I have downloaded 8298-A01 and the Note 3 lite too the Note 3 lite has everything my phone have making am having 3 Roms now 8298-M02 8298-A01 and 8298-100
Sent from my htc_desire_626g using Tapatalk