Hovatek Forum MOBILE Android [Please help] Clone LG V5 no power after flash
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] Clone LG V5 no power after flash

[Please help] Clone LG V5 no power after flash

Studio
Studio
Studio
Senior Member
158
14-12-2017, 04:16 AM
#1



I flash a clone LG v5 with SP flash tool and it flashed successfully, but the phone is not powering up and it's not flashing again it is showing "ERROR 4032 - Enable DRAM failed!" please what is the way out. Thanks
Attached Files
.png
Screenshot (12).png
Size: 118.72 KB / Downloads: 3
hovatek
hovatek
hovatek
Administrator
49,570
14-12-2017, 12:11 PM
#2
(14-12-2017, 04:16 AM)Studio I flash a clone LG v5 with SP flash tool and it flashed successfully, but the phone is not powering up and it's not flashing again it is showing "ERROR 4032 - Enable DRAM failed!" please what is the way out. Thanks

You need to flash a different firmware, preferably one of a higher Build

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Studio
Studio
Studio
Senior Member
158
17-12-2017, 02:39 AM
#3
(14-12-2017, 12:11 PM)hovatek
(14-12-2017, 04:16 AM)Studio I flash a clone LG v5 with SP flash tool and it flashed successfully, but the phone is not powering up and it's not flashing again it is showing "ERROR 4032 - Enable DRAM failed!" please what is the way out. Thanks

You need to flash a different firmware, preferably one of a higher Build

Pls hw can I get the higher build firmware, bcuz I've tried 4 to 5 different firmware, but am Still getting the same error message
hovatek
hovatek
hovatek
Administrator
49,570
18-12-2017, 12:34 PM
#4
(17-12-2017, 02:39 AM)Studio Pls hw can I get the higher build firmware, bcuz I've tried 4 to 5 different firmware, but am Still getting the same error message

Uninstall all MTK drivers on your PC using USB Deview at https://www.hovatek.com/forum/thread-7660.html then reinstall using https://www.hovatek.com/forum/thread-440.html

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Studio
Studio
Studio
Senior Member
158
18-12-2017, 08:57 PM
#5



(18-12-2017, 12:34 PM)hovatek
(17-12-2017, 02:39 AM)Studio Pls hw can I get the higher build firmware, bcuz I've tried 4 to 5 different firmware, but am Still getting the same error message

Uninstall all MTK drivers on your PC using USB Deview at https://www.hovatek.com/forum/thread-7660.html then reinstall using https://www.hovatek.com/forum/thread-440.html

Ok, lemme give it try n c hw it goes
Studio
Studio
Studio
Senior Member
158
18-12-2017, 09:02 PM
#6
(18-12-2017, 12:34 PM)hovatek
(17-12-2017, 02:39 AM)Studio Pls hw can I get the higher build firmware, bcuz I've tried 4 to 5 different firmware, but am Still getting the same error message

Uninstall all MTK drivers on your PC using USB Deview at https://www.hovatek.com/forum/thread-7660.html then reinstall using https://www.hovatek.com/forum/thread-440.html

Ok, lemme give it a try n c hw it goes
Studio
Studio
Studio
Senior Member
158
20-12-2017, 04:00 AM
#7
(18-12-2017, 12:34 PM)hovatek
(17-12-2017, 02:39 AM)Studio Pls hw can I get the higher build firmware, bcuz I've tried 4 to 5 different firmware, but am Still getting the same error message

Uninstall all MTK drivers on your PC using USB Deview at https://www.hovatek.com/forum/thread-7660.html then reinstall using https://www.hovatek.com/forum/thread-440.html

I uninstall the drivers uninstall the USB Deview and install the vcom driver to the system but the phone still didn't flash.
What next now?
hovatek
hovatek
hovatek
Administrator
49,570
20-12-2017, 11:59 AM
#8
(20-12-2017, 04:00 AM)Studio I uninstall the drivers uninstall the USB Deview and install the vcom driver to the system but the phone still didn't flash.
What next now?

You'll have to keep trying roms for your model till you get the right variant
That or the emmc chip is damaged
This post was last modified: 20-12-2017, 12:00 PM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Studio
Studio
Studio
Senior Member
158
21-12-2017, 02:28 AM
#9
(20-12-2017, 11:59 AM)hovatek
(20-12-2017, 04:00 AM)Studio I uninstall the drivers uninstall the USB Deview and install the vcom driver to the system but the phone still didn't flash.
What next now?

You'll have to keep trying roms for your model till you get the right variant
That or the emmc chip is damaged

Alright sir, let just say it's a dead phone, (Five different stock roms and no positive result)
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram