[Please help] Clone LG V5 no power after flash
[Please help] Clone LG V5 no power after flash
(14-12-2017, 04:16 AM)Studio I flash a clone LG v5 with SP flash tool and it flashed successfully, but the phone is not powering up and it's not flashing again it is showing "ERROR 4032 - Enable DRAM failed!" please what is the way out. Thanks
(14-12-2017, 12:11 PM)hovatek(14-12-2017, 04:16 AM)Studio I flash a clone LG v5 with SP flash tool and it flashed successfully, but the phone is not powering up and it's not flashing again it is showing "ERROR 4032 - Enable DRAM failed!" please what is the way out. Thanks
You need to flash a different firmware, preferably one of a higher Build
(17-12-2017, 02:39 AM)Studio Pls hw can I get the higher build firmware, bcuz I've tried 4 to 5 different firmware, but am Still getting the same error message
(18-12-2017, 12:34 PM)hovatek(17-12-2017, 02:39 AM)Studio Pls hw can I get the higher build firmware, bcuz I've tried 4 to 5 different firmware, but am Still getting the same error message
Uninstall all MTK drivers on your PC using USB Deview at https://www.hovatek.com/forum/thread-7660.html then reinstall using https://www.hovatek.com/forum/thread-440.html
(18-12-2017, 12:34 PM)hovatek(17-12-2017, 02:39 AM)Studio Pls hw can I get the higher build firmware, bcuz I've tried 4 to 5 different firmware, but am Still getting the same error message
Uninstall all MTK drivers on your PC using USB Deview at https://www.hovatek.com/forum/thread-7660.html then reinstall using https://www.hovatek.com/forum/thread-440.html
(18-12-2017, 12:34 PM)hovatek(17-12-2017, 02:39 AM)Studio Pls hw can I get the higher build firmware, bcuz I've tried 4 to 5 different firmware, but am Still getting the same error message
Uninstall all MTK drivers on your PC using USB Deview at https://www.hovatek.com/forum/thread-7660.html then reinstall using https://www.hovatek.com/forum/thread-440.html
(20-12-2017, 04:00 AM)Studio I uninstall the drivers uninstall the USB Deview and install the vcom driver to the system but the phone still didn't flash.
What next now?
(20-12-2017, 11:59 AM)hovatek(20-12-2017, 04:00 AM)Studio I uninstall the drivers uninstall the USB Deview and install the vcom driver to the system but the phone still didn't flash.
What next now?
You'll have to keep trying roms for your model till you get the right variant
That or the emmc chip is damaged