Maui Meta Cant Detect Device

[Please help] Maui Meta Cant Detect Device

valkryie94
Enthusiastic Member

5

15-12-2017, 11:43 AM

#1

im gonna using mau meta for fix imei null. but my device not detected by maui meta. pls help.
my devices oppo a39 MT 6750.
@hovatek can you help this newbie pls Smile

X3non
Recognized Contributor

22,062

15-12-2017, 01:54 PM

#2

(15-12-2017, 11:43 AM)valkryie94 im gonna using mau meta for fix imei null. but my device not detected by maui meta. pls help.
my devices oppo a39 MT 6750.
@hovatek can you help this newbie pls

first check and ensure the baseband on your device isnt unknown
then use latest version of mauimeta and install vcom preloader driver @ https://www.hovatek.com/forum/thread-440.html
if it still doesn't detect then try SN writer or a different method @ https://www.hovatek.com/forum/thread-116.html

valkryie94
Enthusiastic Member

5

15-12-2017, 05:19 PM

#3

yup the baseband version is uknown. im using maui meta v9.1635.23 and installed vcom preloader. im using maui meta because i just hv DB file that i got from phone(etc/mddb). and using mtk droid tools with installed and connected pda net++ but still hv same problem the tools cant detect my device always on charging mode. i need more solution pls Sad

xerxes
Senior Member

8,357

15-12-2017, 05:36 PM

#4

(15-12-2017, 05:19 PM)valkryie94 yup the baseband version is uknown. im using maui meta v9.1635.23 and installed vcom preloader. im using maui meta because i just hv DB file that i got from phone(etc/mddb). and using mtk droid tools with installed and connected pda net++ but still hv same problem the tools cant detect my device always on charging mode. i need more solution pls

You'll need to regain baseband before writing IMEI.
First try factory reset in Settings>Backup & Reset , after resetting check baseband.
If still unknown you will have to flash stock ROM or atleast secro.img from stock ROM folder.

This post was last modified: 15-12-2017, 05:37 PM by xerxes.

X3non
Recognized Contributor

22,062

15-12-2017, 05:43 PM

#5

(15-12-2017, 05:19 PM)valkryie94 yup the baseband version is uknown. im using maui meta v9.1635.23 and installed vcom preloader. im using maui meta because i just hv DB file that i got from phone(etc/mddb). and using mtk droid tools with installed and connected pda net++ but still hv same problem the tools cant detect my device always on charging mode. i need more solution pls

if baseband is unknown, then you need to first fix it by flashing stock rom

valkryie94
Enthusiastic Member

5

15-12-2017, 05:53 PM

#6

alr try factory reset but the baseband still unknown. i cant find any stock rom that compatible with my device. can u give any link for that ?

valkryie94
Enthusiastic Member

5

15-12-2017, 07:02 PM

#7

i ever trying flash using firmware for unbrick then update via OTA(CPH1605EX_11_OTA_006_all_201612192142_local.zip) that regain baseband but its gone again after reboot

hovatek
Administrator

49,585

16-12-2017, 11:19 AM

#8

(15-12-2017, 07:02 PM)valkryie94 i ever trying flash using firmware for unbrick then update via OTA(CPH1605EX_11_OTA_006_all_201612192142_local.zip) that regain baseband but its gone again after reboot

You need secro.img . Can you get access to a working phone of the same model?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.

valkryie94
Enthusiastic Member

5

18-12-2017, 09:47 AM

#9

I dont hv the same model right now. But if i have it, how to get secro.img from working phone?

xerxes
Senior Member

8,357

18-12-2017, 01:32 PM

#10

(18-12-2017, 09:47 AM)valkryie94 I dont hv the same model right now. But if i have it, how to get secro.img from working phone?

Dump the secro partition using the guide @ https://www.hovatek.com/forum/thread-13347.html then Write using the guide @ https://www.hovatek.com/forum/thread-14106.html

View a Printable Version

Users browsing this thread:
1 Guest(s)

Find us

Call us

Mail us

Useful Links

Actions