[Development] How to use Magisk Manager & boot.img to root Android

***hovatek*** · 03-01-2018, 10:27 AM

(02-28-2018, 09:50 AM)vinsca59 Wrote: ...
11) I push and hold the "volume down" key
12) connect the device to the computer, part the red arrow, then the yellow one ...
ERROR: STATUS_INSUFFICIENT_BUFFER (0xC00100007)
(sorry I used uppercase characters, but that's how they read on the computer display)
..

You shouldn't be holding any button when connecting to PC for flashing.
BTW, can I see a full screenshot of this error message

dwana · 03-10-2018, 07:23 AM

Thanks helpful and working Used it and got no error. When backing up via miracle Box I was able to back up complete scatter file, but stuck in 93% and showed done in the left side of it. Is it OK that way?

dwana · 03-10-2018, 07:27 AM

Please how can I flash a custom ROM to my infinix smart X5010 ? it's operates 7.0 Noughat.

***hovatek*** · 03-10-2018, 11:08 AM

(03-10-2018, 07:27 AM)dwana Wrote: Please how can I flash a custom ROM to my infinix smart X5010 ? it's operates 7.0 Noughat.

Please, create a new thread
see https://forum.hovatek.com/thread-514.html for how to create a thread

vinsca59 · 03-10-2018, 12:36 PM

1.png Size: 122.31 KB Downloads: 12

2.png Size: 125.28 KB Downloads: 9

[attachment=4791 Wrote:hovatek pid='131372' dateline='1519896455']

(02-28-2018, 09:50 AM)vinsca59 Wrote: ...
11) I push and hold the "volume down" key
12) connect the device to the computer, part the red arrow, then the yellow one ...
ERROR: STATUS_INSUFFICIENT_BUFFER (0xC00100007)
(sorry I used uppercase characters, but that's how they read on the computer display)
..

You shouldn't be holding any button when connecting to PC for flashing.
BTW, can I see a full screenshot of this error message

Before when I connected the device to the computer, the flash tool gave the error as in image 1, so, looking on the internet, I found that the solution was "keep volume down before connecting the device (after starting the download)".
Instead, trying to flash the boot, I have the second error (insufficient buffer) (image 2).

**X3non** · 03-10-2018, 02:49 PM

(03-10-2018, 07:23 AM)dwana Wrote: Thanks helpful and working Used it and got no error. When backing up via miracle Box I was able to back up complete scatter file, but stuck in 93% and showed done in the left side of it. Is it OK that way?

best you redo that backup again and try to close / exit most running apps on the PC while you perform the backup

**X3non** · 03-10-2018, 03:46 PM

(03-10-2018, 12:36 PM)vinsca59 Wrote: Before when I connected the device to the computer, the flash tool gave the error as in image 1, so, looking on the internet, I found that the solution was "keep volume down before connecting the device (after starting the download)".
Instead, trying to flash the boot, I have the second error (insufficient buffer) (image 2).

create a new thread so we focus on this
see https://forum.hovatek.com/thread-514.html for how to create a thread

dwana · 03-10-2018, 07:38 PM

No apps were actually running as at when done.

Dlonewolf · 03-11-2018, 02:45 AM

(03-10-2018, 07:23 AM)dwana Wrote: Thanks helpful and working Used it and got no error. When backing up via miracle Box I was able to back up complete scatter file, but stuck in 93% and showed done in the left side of it. Is it OK that way?

better u do the back up again...

dwana · 03-13-2018, 07:51 PM

OK I will do all over again.